Introduction
Welcome to your new Easytry123 Universal Remote Control. This remote is designed as a direct replacement for various Marantz AV A/V receiver models, offering seamless control without the need for complex programming or pairing. Please read this manual carefully to ensure proper use and optimal performance.
Compatible Models:
- Marantz SR5500
- Marantz RC5300SR
- Marantz RC5200SR
- Marantz RC5000SR
- Marantz RC5400SR
- Marantz RC5500SR
- Marantz RC5600SR
Setup
Battery Installation
Your remote control requires two AAA alkaline batteries (not included).
- Locate the battery compartment cover on the back of the remote control.
- Press down on the tab and slide the cover off.
- Insert two AAA alkaline batteries, ensuring the positive (+) and negative (-) terminals match the diagrams inside the compartment.
- Slide the battery compartment cover back into place until it clicks securely.

Image Description: This image shows the back of the Easytry123 Universal Remote Control. The battery compartment cover is removed, revealing two slots for AAA batteries. The positive and negative terminals are clearly marked within the compartment, indicating the correct orientation for battery insertion.
Initial Use
This universal remote control is pre-programmed for the listed Marantz AV A/V receiver models. No additional programming or pairing is required. Simply install the batteries, and the remote is ready for use.
Operating Instructions
Remote Control Layout
The Easytry123 Universal Remote Control features a standard layout for Marantz AV A/V receivers. Familiarize yourself with the button functions below.

Image Description: This image displays the front of the Easytry123 Universal Remote Control. It is black with grey and white buttons. Key buttons visible include POWER, TV, TUNER, CD, VCR1, VCR2, TAPE, DVD, CDR/MD, MENU, AMP, MUTE, VOLUME UP/DOWN, CHANNEL/SKIP, TUNE/SEARCH, and a numeric keypad (0-9).
Key Functions
- POWER: Turns the connected Marantz AV A/V receiver on or off.
- Input Selectors (TV, TUNER, CD, VCR1, VCR2, TAPE, DVD, CDR/MD): Selects the corresponding input source on your receiver.
- VOLUME UP/DOWN: Adjusts the master volume level.
- MUTE: Mutes or unmutes the audio output.
- CHANNEL/SKIP: Navigates through channels or skips tracks.
- TUNE/SEARCH: Used for tuning radio stations or searching media.
- Numeric Keypad (0-9): For direct input of channel numbers or track selections.
- MENU: Accesses the receiver's on-screen menu.
- Navigation Buttons (Up, Down, Left, Right, OK): Used to navigate through menus and confirm selections.
- AMP: Switches control to the amplifier functions.
- CLEAR: Clears current input or selection.
Maintenance
Cleaning
To clean your remote control, use a soft, dry cloth. Do not use abrasive cleaners, waxes, or solvents, as these may damage the finish or internal components.
Battery Replacement
Replace batteries when the remote's response becomes sluggish or stops functioning. Always replace both batteries at the same time with new AAA alkaline batteries. Do not mix old and new batteries, or different types of batteries.
Storage
If the remote control will not be used for an extended period, remove the batteries to prevent leakage and potential damage.
Troubleshooting
Remote Not Responding
- Check Batteries: Ensure batteries are inserted correctly with the correct polarity (+/-). Replace with fresh AAA alkaline batteries if necessary.
- Line of Sight: Make sure there is a clear line of sight between the remote control and the IR sensor on your Marantz receiver. Obstructions can block the signal.
- Distance: Ensure you are within the effective operating range (approximately 10 meters) of the receiver.
- Receiver Power: Confirm that your Marantz receiver is powered on.
Specific Functions Not Working
- Input Selection: Verify that you have selected the correct input source on the remote (e.g., DVD button for DVD player).
- Receiver Compatibility: Double-check that your Marantz receiver model is listed as compatible with this remote control.
Specifications
| Feature | Detail |
|---|---|
| Brand | Easytry123 |
| Model | Universal Remote Control |
| Compatibility | Marantz AV A/V Receivers (SR5500, RC5300SR, RC5200SR, RC5000SR, RC5400SR, RC5500SR, RC5600SR) |
| Power Source | 2 x AAA Alkaline Batteries |
| Maximum Range | 10 meters |
| ASIN | B07RYVSJZ9 |
Warranty and Support
For any questions or issues not covered in this manual, please contact your retailer or the manufacturer for support. Specific warranty information may vary by region and retailer.