Product Overview
The POWER STRUT PS-1300-2 is a universal two-piece conduit strap designed for securing 2-inch diameter conduits or pipes. Manufactured from durable steel, this strap provides a robust and reliable solution for various electrical and industrial installations. Its two-piece design allows for easy installation and secure fastening.
Image: The POWER STRUT PS-1300-2 universal two-piece conduit strap shown alongside its Radwell International Inc. packaging. The strap is made of metal and features a bolt and nut for securing. The packaging indicates it's a new supply from Radwell.
Specifications
| Brand Name | POWER-STRUT |
| Part Number | PS-1300-2 (also referred to as PS 1300) |
| Product Type | Universal Two-Piece Conduit Strap |
| Diameter | 2 inches (2") |
| Material | Steel |
| Item Weight | 3.68 ounces |
| Manufacturer | POWER STRUT |
Installation Instructions (Setup)
The PS-1300-2 conduit strap is designed for straightforward installation. Follow these steps for proper setup:
- Preparation: Ensure the mounting surface is clean, stable, and capable of supporting the conduit and strap assembly. Gather necessary tools, which typically include a wrench or socket for tightening the bolt.
- Positioning: Place one half of the two-piece strap around the conduit at the desired mounting point.
- Assembly: Bring the second half of the strap into position, aligning the bolt holes. Insert the bolt through the aligned holes.
- Securing: Thread the nut onto the bolt and hand-tighten.
- Final Tightening: Using a wrench or socket, tighten the nut firmly to secure the conduit in place. Do not overtighten, as this may damage the conduit or the strap. Ensure the conduit is held securely without excessive movement.
Note: Always adhere to local electrical codes and safety regulations when installing conduit and related components.
Operating Considerations
Once installed, the PS-1300-2 strap functions passively to hold the conduit in its intended position. No active operation is required. Ensure that the strap is not subjected to forces beyond its design capacity, which could lead to dislodgement or damage.
Maintenance
The POWER STRUT PS-1300-2 conduit strap requires minimal maintenance. Periodic inspection is recommended to ensure continued integrity:
- Visual Inspection: Regularly check the strap for any signs of corrosion, deformation, cracks, or other physical damage.
- Tightness Check: Verify that the securing bolt and nut remain tight. If any looseness is detected, re-tighten to ensure the conduit is securely held.
- Environmental Factors: In corrosive environments, more frequent inspections may be necessary. Consider applying a protective coating if the strap is exposed to harsh conditions.
Replace any damaged or severely corroded straps immediately to prevent potential hazards.
Troubleshooting
Given the passive nature of the conduit strap, troubleshooting is generally limited to installation issues or physical damage.
- Conduit is Loose:
- Cause: Bolt and nut are not sufficiently tightened.
- Solution: Re-tighten the bolt and nut firmly.
- Cause: Strap is incorrect size for conduit.
- Solution: Ensure the conduit diameter matches the 2-inch specification of the PS-1300-2 strap.
- Strap Appears Damaged/Corroded:
- Cause: Exposure to harsh environmental conditions or physical impact.
- Solution: Replace the damaged strap immediately.
Warranty and Support
For specific warranty information and technical support regarding the POWER STRUT PS-1300-2 conduit strap, please contact the manufacturer, POWER STRUT, or your authorized distributor. Retain your purchase receipt for warranty claims.
Manufacturer: POWER STRUT
For further assistance, refer to the contact information provided by your supplier or visit the official Power-Strut website.