Introduction
Thank you for choosing the SKYVIK TRUHOLD Car Phone Mount. This manual provides detailed instructions for the proper setup, operation, and maintenance of your magnetic phone holder. Please read this manual carefully before use to ensure optimal performance and safety.
What's Included
The SKYVIK TRUHOLD package contains the following components:
- 1x SKYVIK TRUHOLD Magnetic Mobile Holder
- 1x Suction Mount
- 2x Stronghold Metal Plates
- 2x Scratch-proof Films
Product Features
- Strong Suction Cup: Designed for secure attachment to car windshields, dashboards, and other flat surfaces.
- Powerful Magnetic Hold: Utilizes Neodymium N45 Magnets for a firm grip on your device, even on uneven roads.
- Versatile Viewing Angles: Features a swivel ball head and adjustable arm for optimal positioning and reach.
- Wide Compatibility: Suitable for all smartphones.
- Durable Construction: Made with metal enclosure material for longevity.
Image: The car mount features a telescopic arm and a swivel ball joint, allowing for precise angle adjustments and extended reach.
Image: The magnetic head securely holds a smartphone using an adhesive metal plate, ensuring a powerful and stable connection.
Setup Instructions
- Prepare the Surface: Choose a clean, flat, and smooth surface on your car's dashboard or windshield. Ensure the surface is free from dust, grease, and moisture. Use an alcohol wipe if necessary and let it dry completely.
- Attach the Suction Mount: Remove the protective film from the suction cup. Press the suction cup firmly against the chosen surface.
- Secure the Mount: While pressing down, push the lever on the suction cup downwards to create a vacuum seal. This will lock the mount securely in place.
- Apply Metal Plate to Device:
- Clean the back of your phone or phone case.
- Apply one of the provided scratch-proof films to the desired area on your phone or case. This protects your device's surface.
- Peel off the adhesive backing from a Stronghold metal plate and firmly attach it over the scratch-proof film. Press for 30 seconds to ensure strong adhesion. Allow 24 hours for the adhesive to fully cure before use.
Image: The suction cup provides an unbeatable hold on smooth surfaces like a windshield.
Image: Quick setup involves securing the suction cup and easily attaching the phone to the magnetic holder.
Operating Instructions
- Adjust Viewing Angle: Loosen the adjustment knob on the arm or the swivel ball joint. Position the arm and magnetic head to your desired viewing angle. Tighten the knob to secure the position.
- Attach Your Phone: Gently place your smartphone (with the metal plate attached) onto the magnetic head of the holder. The strong magnets will automatically secure your device.
- Remove Your Phone: To remove your phone, simply pull it away from the magnetic head.
Image: The phone mount provides a stable platform for navigation, keeping your device visible and accessible.
Maintenance
- Clean Suction Cup: If the suction cup loses its grip, rinse it with warm water and let it air dry. Do not use harsh chemicals.
- Clean Magnetic Surface: Wipe the magnetic surface with a soft, dry cloth to remove any dust or debris.
- Avoid Extreme Temperatures: Prolonged exposure to extreme heat or cold can affect the performance and lifespan of the mount.
Troubleshooting
- Problem: Mount is not sticking to the surface.
- Solution: Ensure the surface is clean, dry, and smooth. Re-press the suction cup firmly and engage the locking lever. If the suction cup is dirty, clean it with warm water and air dry.
- Problem: Phone is not holding securely on the magnetic head.
- Solution: Verify that the metal plate is correctly attached to your phone or case and is centered for optimal magnetic contact. Ensure no thick cases or objects are interfering with the magnetic connection.
- Problem: Mount wobbles or shifts during driving.
- Solution: Check all adjustment points and ensure they are tightened securely. Re-check the suction cup's seal to the mounting surface.
Specifications
| Brand | SKYVIK |
| Model Name | TRUHOLD |
| Model Number | CM-WM01 |
| Colour | Black |
| Compatible Devices | Smartphones |
| Mounting Type | Suction |
| Enclosure Material | Metal |
| Item Dimensions | 6 x 4 x 3 Centimeters |
| Item Weight | 240 Grams |
Warranty Information
The SKYVIK TRUHOLD Car Phone Mount comes with a 2-year warranty from the date of purchase. This warranty covers manufacturing defects and material flaws under normal use. Please retain your proof of purchase for warranty claims. For more details, please contact customer support.
Customer Support
For any inquiries, technical assistance, or warranty claims, please contact SKYVIK Technologies:
- Phone: 18001238830
- Manufacturer: SKYVIK TECHNOLOGIES