1. Product Overview
The Anpviz 5MP Bullet PoE IP Security Camera (Model: IPC-B850WD-S) is designed for both outdoor and indoor surveillance. It features a 5-megapixel resolution (2560x1290) at 25 frames per second, providing clear and sharp images and video. The camera includes a 2.8mm lens offering a 110° ultra-wide viewing angle and supports infrared night vision up to 100 feet (30 meters).
Key features include a built-in microphone for 24/7 audio recording, human motion detection, and support for up to 512GB Micro SD card storage (not included). Its full metal housing ensures IP66 waterproof protection, making it suitable for various environmental conditions. The camera is compatible with Anpviz NVRs, third-party On-vif NVRs, and various surveillance software like ISpy, Blue-iris, and Milestone.
Image 1.1: Anpviz 5MP Bullet PoE IP Security Camera highlighting its features.
Video 1.1: Overview of the Anpviz 5MP Outdoor Bullet PoE IP Camera.
2. What's in the Box
Verify that all items are present in the package:
- 1x Anpviz 5MP PoE Camera
- 1x User Manual
- 1x Waterproof Lid
- Mounting Screws
- 1x Warning Sticker
Image 2.1: Contents included in the product package.
3. Setup
3.1 Mounting the Camera
The camera can be mounted on a wall or ceiling. Ensure the mounting surface is strong enough to support the camera's weight. Use the provided mounting screws and the measurement paper sticker to mark drill holes accurately.
Image 3.1: Illustration of ceiling and wall mounting options.
Video 3.1: Guide on how to install the PoE camera.
3.2 Connection Methods
The Anpviz PoE IP camera offers flexible connection options:
- Work with ON-VIF NVR: Connect the camera directly to a PoE port on your NVR. The NVR will provide power and handle video recording.
- Work with PoE Switch: Connect the camera to a PoE switch. The switch provides power and network connectivity. The switch then connects to your router.
- Work with Power Adapter (Not Included): If a PoE setup is not available, the camera can be powered by a DC 12V power adapter (sold separately). Connect the camera to your network via an Ethernet cable to a router.
For all connection types, ensure a stable network connection for optimal performance.
Image 3.2: Three primary methods for connecting the camera to your network.
Video 3.2: Demonstrating three ways to connect an Anpviz PoE Camera.
3.3 Initial Configuration
After physical installation and connection, access the camera for initial configuration. This can typically be done via a web browser (Edge, Firefox, Chrome) by entering the camera's IP address, or through compatible software like ISpy, Blue-iris, or Milestone. For Anpviz NVRs, the camera should be plug-and-play.
4. Operating the Camera
4.1 Remote Access
Monitor your camera feed remotely using the Mobile App (VideoLink, available on Google Play and App Store) or PC Client (LMS / VideoLink). This allows you to view live footage, playback recordings, and adjust settings from your smartphone, tablet, or computer.
Image 4.1: Remote access options via mobile application and PC client.
4.2 Human Motion Detection
The camera features human motion detection, which can be configured to send email alerts or push notifications to your mobile app when human activity is detected. This helps reduce false alarms from other movements.
Image 4.2: Human motion detection triggering alerts.
4.3 Audio Recording
A built-in microphone with environmental noise filtering allows for clear audio recording, providing sound alongside video footage. This feature enhances surveillance by capturing auditory information.
Image 4.3: The camera features a built-in microphone for audio capture.
4.4 Flexible Storage Options
The camera supports continuous 24/7 recording. You can store footage using:
- Micro SD Card: The camera has a built-in Micro SD card slot supporting up to 512GB (card not included).
- Network Video Recorder (NVR): Compatible with Anpviz NVRs for plug-and-play recording, and also works with other third-party On-vif NVRs.
Image 4.4: Storage options including Micro SD card and NVR.
4.5 Night Vision
Equipped with infrared (IR) lights, the camera provides clear night vision up to 100 feet (30 meters), ensuring surveillance capabilities in low-light or complete darkness.
Image 4.5: Day and night vision comparison demonstrating 100ft IR capability.
4.6 IP66 Waterproof Rating
The camera features a full metal housing with an IP66 waterproof rating, protecting it from dust and heavy rain. It is designed to operate reliably in extreme temperatures ranging from -20°C (-4°F) to 60°C (140°F).
Image 4.6: The camera's IP66 waterproof and temperature resistance.
Video 4.7: Demonstration of the camera's IP66 waterproof rating for outdoor and indoor use.
5. Maintenance
- Regular Cleaning: Periodically clean the camera lens and housing with a soft, damp cloth to remove dust and debris, ensuring clear image quality. Avoid abrasive cleaners.
- Check Connections: Ensure all cable connections (Ethernet, power) are secure and free from damage, especially for outdoor installations.
- Firmware Updates: Check the manufacturer's website (www.anpvizsecurity.com) for any available firmware updates to improve performance and security.
- Storage Management: Regularly review stored footage and manage storage space, especially if using a Micro SD card, to prevent it from becoming full.
6. Troubleshooting
6.1 No Image/Video Feed
- Check Power: Ensure the camera is receiving power, either via PoE or a 12V DC adapter. Verify the PoE switch/NVR is powered on.
- Check Network Connection: Confirm the Ethernet cable is securely connected to both the camera and the network device (NVR/switch/router). Check network indicator lights.
- IP Address Conflict: Ensure the camera has a unique IP address on your network. Use network scanning tools if necessary.
6.2 Cannot Access Camera Remotely
- Internet Connection: Verify your router has an active internet connection.
- App/Client Status: Ensure the mobile app or PC client is updated and correctly configured with the camera's details.
- Firewall/Router Settings: Check if your router's firewall or port forwarding settings are blocking access.
6.3 Password Reset
If you forget your camera's password, refer to the official Anpviz website for instructions on how to reset it. This typically involves using specific software tools.
Video 6.1: Instructions on how to reset the password for Uprime Series PoE IP Cameras.
Video 6.2: Guide on downloading search tools to reset the camera.
7. Specifications
| Feature | Detail |
|---|---|
| Model Name | IPC-B850WD-S |
| Resolution | 5MP (2592x1944) |
| Frame Rate | 25fps |
| Lens | 2.8mm Fixed Lens |
| Viewing Angle | 110° |
| Night Vision Range | 100 feet (Infrared) |
| Audio | Built-in Microphone (One-way audio) |
| Storage | Micro SD Card Slot (up to 512GB, not included) |
| Connectivity | Wired Power over Ethernet (PoE) |
| Weather Resistance | IP66 Waterproof, Full Metal Housing |
| Operating Temperature | -20°C to 60°C (-4°F to 140°F) |
| Video Compression | H.265/H.264 |
| Motion Detection | Human Motion Detection |
| Power Source | PoE (IEEE 802.3af) or DC 12V (power adapter not included) |
| Dimensions | 7.87 x 3.94 x 3.94 inches (approx. 20 x 10 x 10 cm) |
| Weight | Approx. 0.5 kg (1.1 lbs) |
8. Warranty and Support
Anpviz provides a one-year warranty for this product and offers lifelong technical support.
For technical assistance, warranty claims, or any product-related inquiries, please contact Anpviz customer support:
- Email: support@anpvizsecurity.com
- Operating Hours: Monday - Friday, 9:00 AM - 6:00 PM (Time Zone not specified, typically PST/EST for US support)
- Online Resources: Visit the official Anpviz Security website for FAQs, software downloads, and additional support materials: www.anpvizsecurity.com
