Mr Beams MB800 LED Puck Light Instruction Manual

Introduction

The Mr Beams MB800 LED Puck Light provides convenient, hands-free illumination for various areas in your home. This battery-operated light features motion activation, automatic shut-off, and a unique diffuser for a balanced light pattern. It is ideal for under cabinets, cupboards, closets, shelves, and other workspaces.

Product Features

Brightness: Provides 30 lumens of bright white LED light.
Motion and Light Sensors: Activates only when motion is detected in dark conditions.
Auto Shut-Off: Automatically turns off after 20 seconds of no motion to conserve battery life.
Wireless Installation: Easy setup in under 5 minutes using included mounting hardware or double-sided adhesive.
Long Battery Life: Designed to provide approximately one year of light on each set of batteries (not included) with average use of 8 activations per night.
Balanced Light: Unique diffuser creates a pleasing and even light pattern.

Setup and Installation

1. Battery Installation

The Mr Beams MB800 LED Puck Light requires three (3) AAA batteries (not included). Ensure correct polarity when inserting batteries.

Hand installing AAA batteries into the Mr Beams MB800 LED Puck Light

A close-up view of a hand inserting three AAA batteries into the battery compartment of the Mr Beams MB800 LED Puck Light.

2. Mounting the Light

The puck light can be installed wirelessly in less than 5 minutes using either the included double-sided adhesive or screws. No wiring or electrician is needed.

Choose a suitable location for the light, such as under a cabinet, shelf, or inside a closet.
Clean the mounting surface thoroughly to ensure proper adhesion.
Using Adhesive: Peel the backing from the double-sided adhesive and firmly press the mounting bracket onto the desired surface. Hold for 30 seconds.
Using Screws: Use the provided screws to secure the mounting bracket to the surface.
Once the bracket is secure, twist the puck light onto the bracket until it locks into place.

Mr Beams MB800 LED Puck Light installed under a kitchen cabinet

A Mr Beams MB800 LED Puck Light mounted under a kitchen cabinet, providing task lighting over a countertop.

Installation Demonstration Video

Open video

This video demonstrates the features of the Mr Beams MB800 LED Puck Light, including its motion activation, easy wireless installation, and balanced light pattern for various home applications like under cabinets, shelves, and cupboards.

Operating Instructions

The Mr Beams MB800 LED Puck Light is designed for automatic operation. It combines motion and light sensors to provide light only when needed.

The light will activate when motion is detected within its range (up to 10 feet) and the ambient light conditions are dark enough.
After 20 seconds of no motion, the light will automatically turn off to conserve battery power.
For optimal performance, ensure the sensor is not obstructed and is positioned to detect motion in the desired area.

Mr Beams MB800 LED Puck Lights illuminating shelves

Multiple Mr Beams MB800 LED Puck Lights installed under shelves, providing bright, even illumination for decorative items and books.

Mr Beams MB800 LED Puck Light illuminating a pantry shelf

A Mr Beams MB800 LED Puck Light installed on a pantry shelf, brightly illuminating food items and containers.

Mr Beams MB800 LED Puck Light illuminating a closet rod

A Mr Beams MB800 LED Puck Light mounted above a closet rod, providing light for clothes hanging below.

Maintenance

Battery Replacement

When the light output diminishes or the light stops activating, it is time to replace the batteries. To replace batteries:

Gently twist the puck light counter-clockwise to detach it from its mounting bracket.
Open the battery compartment and remove the old AAA batteries.
Insert three new AAA batteries, ensuring correct polarity (+/-).
Close the battery compartment and twist the puck light back onto the mounting bracket until it clicks into place.

Cleaning

Wipe the light with a soft, damp cloth as needed. Do not use abrasive cleaners or immerse the unit in water.

Troubleshooting

Problem	Possible Cause	Solution
Light does not turn on.	Batteries are dead or incorrectly installed. Area is not dark enough for the light sensor to activate. No motion detected.	Replace batteries, ensuring correct polarity. Move the light to a darker location or wait for ambient light to decrease. Ensure the sensor has a clear line of sight to the area where motion is expected.
Light turns off too quickly.	Auto shut-off feature is working as designed (20 seconds). Motion is not continuously detected.	This is normal operation. If continuous light is needed, consider a different lighting solution. Adjust the light's position to better capture continuous motion in the area.
Light is dim.	Low battery power.	Replace all three AAA batteries with new ones.

Specifications

Model Number: MB800
Light Output: 30 Lumens
Power Source: 3 x AAA Batteries (not included)
Motion Sensor Range: Up to 10 feet
Auto Shut-Off: 20 seconds (no motion detected)
Dimensions: Approximately 3.35 x 3.35 x 0.91 inches
Material: Plastic
Usage: Indoor
Included Components: LED Puck Light, Mounting Hardware (adhesive/screws)

Warranty and Support

This Mr Beams MB800 LED Puck Light comes with a 1-year warranty against manufacturer defects from the date of purchase. Please retain your proof of purchase for warranty claims.

For technical support or warranty inquiries, please contact Mr Beams customer service through their official website or the retailer where the product was purchased.

Mr Beams MB800