Introduction
This manual provides essential information for the safe and effective use of your Amazon Basics UPS Battery Backup & Surge Protector. Please read these instructions thoroughly before installation and operation, and retain them for future reference.
Image: Front view of the Amazon Basics UPS Battery Backup & Surge Protector. This unit is designed to provide uninterrupted power and surge protection for electronic devices.
Important Safety Information
Always follow basic safety precautions when using this product to reduce the risk of fire, electric shock, and injury to persons.
- Do not open or disassemble the UPS unit. There are no user-serviceable parts inside.
- Do not use the UPS in environments with excessive humidity or extreme temperatures.
- Ensure the UPS is connected to a properly grounded outlet.
- Avoid overloading the UPS. Refer to the specifications for maximum capacity.
- Disconnect the UPS from the power source before cleaning or maintenance.
- This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.
Setup Guide
Follow these steps to set up your UPS for the first time:
- Unpacking: Carefully remove the UPS from its packaging. Inspect for any damage.
- Initial Charge: Before connecting any devices, plug the UPS into a standard wall outlet for at least 8 hours to ensure the battery is fully charged. This optimizes battery performance and lifespan.
- Placement: Place the UPS in a well-ventilated area, away from direct sunlight, heat sources, and excessive moisture. The mini tower design allows for easy placement under desks or in entertainment centers.
- Connecting Devices:
- Connect critical devices (e.g., computer, monitor, router) to the 5 surge-protected/battery-backup outlets (NEMA 5-15R). These outlets provide power during outages.
- Connect non-critical devices (e.g., printer, scanner) to the 5 surge-protected outlets. These outlets only provide surge protection.
- Software Installation (Optional): Power management software is available for download. This software allows for advanced monitoring and configuration of the UPS, including automatic PC shutdown during extended outages. Connect the UPS to your computer using the provided USB cable for software communication.
Image: Rear view of the Amazon Basics UPS, highlighting the 10 outlets (5 surge-protected and 5 battery-backup) and the 6-foot power cord with a NEMA 5-15P right-angle plug.
Image: The USB cable included with the Amazon Basics UPS, used for connecting the UPS to a computer for power management software functionality.
Operating Instructions
The Amazon Basics UPS operates automatically to protect your connected devices.
- Power On/Off: Press the power button on the front of the unit to turn the UPS on or off.
- Automatic Voltage Regulation (AVR): The UPS features AVR to stabilize incoming AC power, protecting connected equipment from voltage fluctuations without using battery power.
- Battery Backup: In the event of a power outage, the UPS will automatically switch to battery power, providing continuous power to connected battery-backup outlets. The runtime varies based on the power consumption of connected devices. At half load (750VA/450W), the UPS provides approximately 10 minutes of backup power. At full load (1500VA/900W), it provides approximately 1.5 minutes of backup power.
- Audible Alarms: The UPS emits audible alarms to indicate status changes, such as switching to battery mode or low battery. The alarm tone may become faster as battery power depletes.
- Overload Protection: If the connected load exceeds the UPS's capacity, an overload alarm will sound, and the unit may shut down to prevent damage. Disconnect non-essential devices to reduce the load.
Image: Close-up of the front panel of the Amazon Basics UPS, showing the power button, mute button, and indicator lights for Online, On Battery, AVR, and Overload status.
Maintenance
Proper maintenance ensures the longevity and reliability of your UPS.
- Battery Replacement: The internal battery is designed for a specific lifespan. When the battery capacity significantly degrades, it should be replaced by qualified personnel. Refer to the warranty section for service options.
- Cleaning: Use a dry, soft cloth to clean the exterior of the UPS. Do not use liquid or aerosol cleaners.
- Storage: If storing the UPS for an extended period, ensure the battery is fully charged, then disconnect it from the power source. Recharge the battery every 3-6 months to prevent deep discharge.
- Load Management: For optimal system performance, keep the total load below 80% of the unit's rated capacity (900W for this model).
Troubleshooting
If you encounter issues with your UPS, consult the following table:
| Problem | Possible Cause | Solution |
|---|---|---|
| UPS does not turn on. | Battery not connected or discharged. | Ensure the battery is properly connected. Charge the UPS for at least 8 hours. |
| UPS beeps continuously. | Overload condition. | Disconnect non-essential equipment. Reduce the total load to within the UPS's capacity. |
| Short battery runtime. | Battery not fully charged or nearing end of life. | Allow the UPS to charge for 8 hours. If the problem persists, the battery may need replacement. |
| UPS does not provide power during an outage. | Devices connected to surge-only outlets. | Ensure critical devices are connected to the battery-backup outlets. |
Specifications
- Model: ABMT1500
- Capacity: 1500VA / 900W
- Outlets: 10 total (5 surge-protected, 5 surge-protected/battery-backup NEMA 5-15R)
- Input Voltage: 100 Volts
- Battery Type: Lead Acid
- Typical Runtime (Half Load): Approximately 10 minutes (750VA/450W)
- Typical Runtime (Full Load): Approximately 1.5 minutes (1500VA/900W)
- Dimensions (LxWxH): 13.7 x 3.9 x 9.8 inches (34.8 x 9.91 x 24.89 cm)
- Weight: 25 pounds (11.34 kg)
- Color: Black
Image: Diagram showing the dimensions of the Amazon Basics UPS, with measurements in both inches and centimeters.
Warranty and Support
This Amazon Basics UPS is backed by a limited 1-year warranty, including the battery. Additionally, it includes a $75,000 connected equipment guarantee.
- For detailed warranty information, please refer to the official warranty document provided with your product or available for download from the product page.
- For technical support or warranty claims, please contact Amazon customer service.
- Additional resources, including user guides and software downloads, can be found in the "Product guides and documents" section on the Amazon product page.
Note: The connected equipment guarantee is subject to specific terms and conditions. Please review these terms carefully.
You can find the User Guide (PDF) here and the User Manual (PDF) here.
