Introduction
The PELONIS 3-speed oscillating Tower fan with timer and remote provides maximum comfort in a minimum space. With a tall, narrow profile, this fan is ideal for smaller rooms or areas with limited floor space. It features three speeds, multiple modes, and a timer for automatic shutoff. A convenient remote control allows for easy operation from a distance.
Figure 1: PELONIS FZ10-19JR Quiet Oscillating Tower Fan and Remote Control.
Safety Information
Always read and follow all safety instructions before using this appliance to prevent injury or damage. Keep this manual for future reference.
- Overheat Protection: The motor has built-in overheat protection for peace of mind, automatically shutting off the fan if it overheats.
- Child Safety: The compact design on the fan grid ensures the safety of children by preventing finger penetration.
- Proposition 65 Warning: This product may contain chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.
- Ensure the fan is placed on a stable, flat surface to prevent tipping.
- Do not insert fingers or foreign objects into the fan grille.
- Unplug the fan from the power outlet before cleaning or performing any maintenance.
Package Contents
Verify that all components are present upon opening the package:
- PELONIS FZ10-19JR Tower Fan Unit
- Remote Control
- Base Parts (multiple pieces for assembly)
- User Manual (PDF available online)
Setup
The PELONIS FZ10-19JR Tower Fan requires minimal assembly. Follow these steps to set up your fan:
- Assemble the Base: The base comes in multiple pieces. Snap the base pieces together securely.
- Attach Fan Unit to Base: Carefully align the fan unit with the assembled base. Ensure the power cord is routed through the designated opening in the base.
- Secure the Base: Locate the screw underneath the base and tighten it to firmly attach the fan unit to the base.
- Placement: Place the assembled fan on a stable, flat surface.
- Power Connection: Plug the fan into a standard 120V/60HZ power outlet.
Figure 2: The 36-inch height of the tower fan, highlighting its compact design and various features.
Figure 3: Key features of the PELONIS tower fan, including silent operation, wide-angle airflow, timer, and auto shut-off.
Video 1: An overview of the 36-inch PELONIS FZ10-19JR Oscillating Tower Fan, demonstrating its compact size and features.
Operating Instructions
Your PELONIS tower fan can be operated using the multi-functional control panel on top of the unit or the included remote control.
Control Panel and Remote
Both the control panel and the remote offer identical functions for convenience. The control panel is located on the top of the fan for easy access without bending.
Figure 4: Close-up of the overhead control panel, highlighting the tight fence design for safety and the internal gale wheel for air volume.
- Power Button (ON/OFF): Turns the fan on or off.
- Mode Button: Cycles through different wind modes (Normal, Natural, Sleep).
- Speed Button: Adjusts the fan speed (Low, Medium, High).
- Oscillation Button (Osc): Activates or deactivates the 60° wide-angle oscillation function.
- Timer Button: Sets the automatic shutoff timer (up to 7 hours).
Fan Modes
- Normal Wind: Provides a constant airflow.
- Natural Wind: Simulates natural breezes with alternating strong and weak airflows.
- Sleep Mode: Operates at a low noise level (as low as 48 dB) for undisturbed sleep. The LED display auto-off after 30 seconds to minimize light disturbance.
Figure 5: Visual representation of the fan's different wind modes: Natural Wind, Normal Wind, and Strong Airflow.
Figure 6: The fan's quiet operation in sleep mode, ideal for bedrooms and nurseries.
Figure 7: Illustration of the fan's ultra-silence feature (below 48dB on low speed), perfect for quiet environments.
Remote Control Storage
The fan features a built-in cubby at the back for convenient storage of the remote control, ensuring it is always within reach and not easily misplaced.
Video 2: Demonstration of the remote control storage slot on the back of the Pelonis Tower Fan.
Maintenance
Regular cleaning helps maintain the fan's performance and extends its lifespan.
- Exterior Cleaning: Use a soft, damp cloth to wipe down the exterior surfaces of the fan. Do not use abrasive cleaners or solvents.
- Grille Cleaning: Use a vacuum cleaner with a brush attachment to remove dust from the fan grilles. For deeper cleaning, a compressed air can may be used to dislodge dust from hard-to-reach areas.
- Internal Cleaning: The fan is not designed for easy disassembly for internal cleaning. Regular external cleaning and compressed air use are recommended to minimize dust accumulation inside.
- Ensure the fan is completely dry before plugging it back in.
Troubleshooting
If you encounter issues with your PELONIS tower fan, try the following troubleshooting steps:
- Fan Not Turning On:
- Ensure the power cord is securely plugged into a working electrical outlet.
- Check if the power outlet is functional by plugging in another device.
- Verify the fan's power button is pressed.
- Fan Not Oscillating:
- Press the oscillation button on the control panel or remote.
- Ensure there are no obstructions preventing the fan from rotating.
- Weak Airflow:
- Increase the fan speed setting.
- Clean the fan grilles to remove any dust or debris that may be obstructing airflow.
- Unusual Noise:
- Ensure the fan is placed on a stable, level surface.
- Check for any loose parts or foreign objects within the fan grilles.
- If the noise is a creaking sound during oscillation, ensure the base is not overtightened. Loosen it slightly if necessary.
- Remote Control Not Working:
- Ensure the remote control's batteries are correctly installed and not depleted.
- Point the remote directly at the fan's control panel.
- Ensure there are no obstructions between the remote and the fan.
Specifications
| Feature | Detail |
|---|---|
| Brand | PELONIS |
| Model Name | FZ10-19JR |
| Color | Glossy Black |
| Electric Fan Design | Floor Fan |
| Power Source | Corded Electric |
| Style | Modern |
| Product Dimensions | 11.8"D x 11.8"W x 36.14"H |
| Room Type | Bedroom |
| Special Feature | Oscillating |
| Recommended Uses | Office, Air Circulation, Bedroom, Living Room, Home |
| Noise Level | 48 dB |
| Finish Type | Glossy |
| Voltage | 120 Volts |
| Included Components | Remote |
| Indoor/Outdoor Usage | Indoor |
| Specification Met | ETL |
| Control Method | Remote |
| Blade Material | Plastic |
| Number of Power Levels | 3 |
| Manufacturer | Pelonis |
| UPC | 750545105431 |
| Item Weight | 9.13 pounds |
Warranty and Support
PELONIS offers a 1-year manufacturer warranty with the purchase of this product, demonstrating confidence in its quality.
For detailed information, refer to the official User Manual (PDF) available online:
For further assistance or inquiries, please visit the official PELONIS Store on Amazon: PELONIS Store
