ECOTRIC Pocket-Riveted Fender Flares with LED Side Markers for 2007-2018 Jeep JK Wrangler Installation Manual

1. Introduction

This manual provides detailed instructions for the proper installation, operation, and maintenance of your new ECOTRIC Pocket-Riveted Fender Flares with LED Side Markers. These fender flares are designed to be compatible with 2007-2018 Jeep Wrangler JK 2/4 Door Unlimited and Rubicon Unlimited models. Constructed from durable polypropylene, they offer enhanced tire coverage and include integrated LED side marker lights for improved visibility.

Please read all instructions carefully before beginning the installation process. Ensure all components are present and that you have the necessary tools.

2. Safety Information

• Always wear appropriate personal protective equipment, including safety glasses and gloves, during installation.
• Ensure the vehicle is parked on a level surface and the parking brake is engaged.
• If lifting the vehicle, use appropriate jack stands to secure it. Never work under a vehicle supported only by a jack.
• Disconnect the vehicle's battery before performing any electrical work.
• Exercise caution when handling tools and sharp objects.
• If you are unsure about any step of the installation, consult a qualified professional.

3. Parts List

Verify that all components listed below are included in your package:

• 4 x Pocket Style Fender Flares (Front & Rear)
• 10 x Side Maker LED Light with wiring harness
• 2 Set x Chrome & Black Rivet (Installation Hardware)
• Additional installation accessories (washers, nuts, bolts)

Image 3.1: Contents of the ECOTRIC Fender Flare package, showing the four flares, LED lights, and all necessary hardware for installation.

4. Tools Required

The following tools are recommended for installation:

• Socket Wrench Set
• Wrenches (various sizes)
• Screwdriver Set (Phillips and Flathead)
• Drill and Drill Bits (if new holes are required)
• Trim Removal Tool
• Wire Strippers/Crimpers
• Electrical Tape or Heat Shrink Tubing

5. Installation Instructions

This section outlines the general steps for installing the fender flares. Specific details may vary slightly depending on your vehicle's current configuration. It is recommended to watch the provided installation video for visual guidance.

5.1. Preparation

1. Park your Jeep Wrangler on a flat, stable surface.
2. Engage the parking brake.
3. If necessary, remove the wheels for easier access to the fender wells. Use jack stands for safety.
4. Carefully remove the factory fender flares and any existing inner fender liners. This may require a trim removal tool and various wrenches/sockets.
5. Clean the mounting surfaces on the vehicle to ensure a proper fit.

Image 5.1.1: A red Jeep Wrangler showcasing the installed fender flares, emphasizing the straightforward installation process.

5.2. Front Fender Flare Installation

1. Position the new front fender flare onto the vehicle's fender well. Align the mounting holes on the flare with the existing holes on the vehicle.
2. Secure the fender flare using the provided hardware (rivets, bolts, washers). Start by hand-tightening all fasteners to ensure proper alignment before fully tightening.
3. Ensure the flare sits flush against the vehicle body.

Image 5.2.1: Close-up of a hand securing a fender flare to the front wheel well of a Jeep Wrangler, illustrating the bolt-on installation.

5.3. Rear Fender Flare Installation

1. Repeat the process for the rear fender flares. Position each rear flare and align the mounting holes.
2. Attach the rear fender flares using the appropriate hardware, hand-tightening first, then fully securing them.
3. Verify that all flares are securely mounted and do not interfere with tire movement or door operation.

Image 5.3.1: A side view of a red Jeep Wrangler with the ECOTRIC fender flares fully installed, highlighting the enhanced appearance and tire protection.

6. Wiring LED Side Marker Lights

The fender flares include yellow LED side marker lights to increase visibility. Follow these steps for wiring:

1. Locate the existing side marker light wiring on your Jeep Wrangler.
2. Carefully splice the wiring harness from the new LED side marker lights into the vehicle's existing marker light circuit. Ensure proper polarity (positive to positive, negative to negative).
3. Use wire crimps or solder connections, then insulate all connections with electrical tape or heat shrink tubing to protect against moisture and corrosion.
4. Test the LED lights to ensure they function correctly with your vehicle's lighting system.

Image 6.1: The integrated yellow LED side marker lights on the fender flares, providing increased visibility for the vehicle.

7. Operating Your Vehicle with New Fender Flares

Once installed, your ECOTRIC fender flares require no special operation. The integrated LED side marker lights will function with your vehicle's existing lighting system. Enjoy the enhanced protection and rugged appearance these flares provide, especially during off-road activities where increased tire coverage is beneficial.

8. Maintenance

To ensure the longevity and appearance of your fender flares:

• Regularly clean the fender flares with mild soap and water. Avoid harsh chemicals or abrasive cleaners that could damage the matte black finish.
• Inspect all mounting hardware periodically for tightness. Re-tighten any loose bolts or rivets to prevent rattling or detachment.
• Check the LED side marker lights for proper function. If any lights are not working, inspect the wiring connections for corrosion or damage.
• The polypropylene material is durable, but avoid excessive impact that could cause cracks or damage.

9. Troubleshooting

9.1. Loose Fitment

If the fender flares appear loose or rattle after installation, re-check all mounting points. Ensure that all bolts and rivets are properly tightened. Some users have noted that the provided hardware may require careful installation or replacement with longer bolts if the original mounting points are worn.

9.2. LED Lights Not Working

If the LED side marker lights do not illuminate:

• Verify that the vehicle's battery is connected and the lights are switched on.
• Check all electrical connections for proper splicing and insulation. Ensure correct polarity.
• Inspect the wiring harness for any cuts or damage.
• Confirm that the vehicle's existing marker light circuit is functioning correctly.

10. Specifications

Image 10.1: Detailed product dimensions for both front and rear fender flares, including length and width measurements.

11. Warranty and Support

For warranty information, please refer to the documentation provided with your purchase or contact ECOTRIC customer support directly. If you encounter any issues or require assistance with installation or troubleshooting, please reach out to the manufacturer's customer service team. Keep your purchase receipt as proof of purchase.