Introduction
This manual provides comprehensive instructions for the Symcode Bluetooth Wireless Barcode Scanner (Model: Laser 1D Bluetooth Scanner). This versatile device offers 3-in-1 operation modes, including 2.4G Wireless, Bluetooth 4.1, and USB 2.0 Wired connectivity, ensuring broad compatibility with various operating systems such as Windows, Mac, Android, and iOS. Designed for portability and efficiency, it features a long transmission distance and large offline storage capacity, making it ideal for diverse scanning needs.
Package Contents
Please verify that all items listed below are included in your package:
- 1 x Symcode Mini Barcode Scanner
- 1 x USB Charging Cable
- 1 x Quick Start Guide (English Version User Manual)
- 1 x 2.4GHz Wireless USB Dongle
- 1 x Hand Strap
- 1 x Lithium Battery (1000mAh, pre-installed or separate)
Product Overview
Familiarize yourself with the key components of your Symcode barcode scanner:
- Indicator Light: Displays status such as power, connection, and charging.
- Scan Window: The area through which the laser scans barcodes.
- ON&OFF Button: Powers the device on or off.
- Scanning Switch: Activates the laser for scanning.
- Battery: Removable 1000mAh Lithium battery.
- Hand Strap: For secure handling and portability.
Setup
1. Battery Installation and Charging
If the battery is not pre-installed, follow these steps:
- Remove the battery cover on the back of the scanner.
- Insert the 1000mAh Lithium battery, ensuring correct polarity.
- Replace the battery cover.
- Connect the scanner to a USB power source using the provided USB charging cable. The indicator light will show charging status. A full charge takes approximately 4-6 hours and provides up to 72 hours of continuous working time or 30 days of standby.
2. Connecting the Scanner
The scanner supports three connection modes: 2.4G Wireless, Bluetooth, and USB Wired.
2.1. 2.4G Wireless Mode
For wireless connection to a computer:
- Plug the 2.4GHz Wireless USB Dongle into an available USB port on your computer.
- Turn on the barcode scanner. It should automatically pair with the dongle. The indicator light will confirm connection.
2.2. Bluetooth Mode
For wireless connection to smartphones, tablets, or Bluetooth-enabled computers:
- Ensure the scanner is powered on.
- Activate Bluetooth on your host device (phone, tablet, computer).
- Search for available Bluetooth devices. The scanner should appear as "Symcode Barcode Scanner" or similar.
- Select the scanner to pair. The indicator light on the scanner will change to confirm successful pairing.
- The scanner supports Bluetooth HID, SPP, and BLE protocols. For most applications, HID (Human Interface Device) mode, which simulates a virtual keyboard, is sufficient.
2.3. USB Wired Mode
Connect the scanner directly to your computer using the provided USB cable. The cable serves both for charging and data transmission. No driver installation is typically required.
Operating Instructions
1. Scanning Barcodes
To scan a barcode:
- Point the scan window of the scanner at the barcode.
- Press the scanning switch. A red laser line will appear.
- Ensure the laser line crosses the entire barcode. A successful scan will be indicated by a beep and/or a change in the indicator light.
Note: This is a 1D barcode scanner. It cannot read 2D barcodes (like QR codes, PDF417) or barcodes from device screens. It may also struggle with barcodes on silver foil paper that reflects light.
2. Offline Storage
The scanner features a built-in 16MB high-capacity memory, capable of storing over 50,000 1D barcodes in offline storage mode. This allows you to collect data without being constantly connected to a host device. Once connected, you can upload the stored data.
Connectivity and Range
The scanner offers impressive range for both wireless modes:
- 2.4G Wireless Mode: Delivers up to 200 meters (656 feet) transmission in open air.
- Bluetooth Mode: Provides up to 30 meters (98 feet) transmission in open air.
Maintenance
To ensure the longevity and optimal performance of your Symcode barcode scanner, follow these maintenance guidelines:
- Cleaning: Use a soft, dry cloth to clean the scanner's exterior. For the scan window, use a lint-free cloth and a mild glass cleaner if necessary. Avoid abrasive cleaners or solvents.
- Battery Care: Store the scanner in a cool, dry place when not in use. If storing for extended periods, ensure the battery is partially charged (around 50%) to prolong its lifespan. Avoid fully discharging the battery frequently.
- Storage: Keep the scanner away from extreme temperatures, direct sunlight, and high humidity.
- Handling: While designed to be durable, avoid dropping the scanner or subjecting it to severe impacts.
Troubleshooting
If you encounter issues with your Symcode barcode scanner, refer to the following common problems and solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| Scanner not connecting via 2.4G Wireless. | USB dongle not properly inserted or not recognized. | Ensure the USB dongle is fully inserted into a working USB port. Try a different USB port. Restart the scanner and the computer. |
| Scanner not connecting via Bluetooth. | Bluetooth on host device is off, scanner is not in pairing mode, or already paired with another device. | Ensure Bluetooth is enabled on your device. Put the scanner into pairing mode (refer to Quick Start Guide for specific steps). Forget previous pairings on your device and try reconnecting. |
| Scanner not reading barcodes. | Barcode type not supported (2D), barcode damaged, or scanner not positioned correctly. | Confirm it's a 1D barcode. Ensure the laser covers the entire barcode. Try scanning from different angles or distances. Clean the scan window. |
| No data transmitted to host device. | Incorrect connection mode or software issue. | Verify the scanner is in the correct mode (e.g., HID for direct input). Check if the host device's input field is active. Try restarting both devices. |
| Battery not charging. | Faulty USB cable or power source. | Try a different USB cable or power adapter. Ensure the cable is securely connected to both the scanner and the power source. |
Specifications
| Feature | Detail |
|---|---|
| Product Dimensions | 3.86 x 1.77 x 0.79 inches |
| Item Weight | 5.5 ounces |
| Battery Type | 1 Lithium Polymer battery (included) |
| Battery Capacity | 1000mAh |
| Continuous Working Time | Up to 72 hours (after full charge) |
| Standby Time | Up to 30 days |
| Charge Time | 4-6 hours |
| Connectivity Technology | Bluetooth, 2.4G Wireless, USB Wired |
| 2.4G Wireless Range | Up to 200m (open air) |
| Bluetooth Range | Up to 30m (open air) |
| Compatible Devices | Smartphones, Tablets, PCs (Windows XP/7/8/10, Windows Mobile, Android OS, iPhone/iPad) |
| Offline Storage | 16MB (supports 50,000 1D codes) |
| Scanner Type | Laser 1D Barcode Scanner |
Warranty and Support
Symcode is committed to providing high-quality products and excellent customer service. For any questions, technical support, or warranty inquiries regarding your barcode scanner, please contact Symcode customer service through the platform where you purchased the product or visit the official Symcode website for contact information.
Please retain your proof of purchase for warranty claims.
