1. Product Overview
The Baby Brezza Formula Pro FRP0046 is an innovative appliance designed to automatically prepare warm formula bottles for infants. It precisely measures, heats, and mixes water and formula powder to the perfect consistency and temperature, saving time and effort for caregivers.
Image 1: Front view of the Baby Brezza Formula Pro FRP0046, showcasing the control panel, formula powder container, and dispensing area.
- Works with most major baby formula brands.
- Features a built-in instant heat system for precise temperature control.
- Compact design with dimensions of 18.4 x 14.8 x 10 inches.
- Item weight: 9.6 ounces.
2. Safety Information
- Always read all instructions before use.
- Keep the appliance out of reach of children.
- Ensure the appliance is placed on a stable, level surface.
- Do not immerse the base unit in water or other liquids.
- Use only filtered or distilled water for formula preparation.
- Regularly clean all removable parts to prevent bacteria growth and ensure proper function.
3. Components
The Baby Brezza Formula Pro consists of several key components:
- Formula Powder Container: Holds the dry formula powder.
- Water Tank: Holds the water for mixing.
- Control Panel: Features buttons for power, temperature, ounce selection, and powder setting.
- Dispensing Funnel: Where the mixed formula is dispensed.
- Drip Tray/Bottle Platform: Adjustable platform to hold various bottle sizes.
4. Setup
4.1 Unpacking
Carefully remove all components from the packaging. Retain packaging for future storage or transport.
4.2 Initial Cleaning
Before first use, wash all removable parts (formula powder container, lid, mixing parts, water tank, drip tray, and dispensing funnel) with warm soapy water, rinse thoroughly, and allow to air dry completely. Wipe the base unit with a damp cloth.
4.3 Filling the Water Tank
Remove the water tank from the back of the machine. Fill it with filtered or distilled water up to the MAX line. Reattach the water tank securely to the base unit.
Image 2: Back view of the Baby Brezza Formula Pro FRP0046, showing the removable water tank with MAX/MIN fill lines.
4.4 Adding Formula Powder
Open the lid of the formula powder container. Pour your chosen formula powder into the container, ensuring it stays between the MIN and MAX lines. Close the lid securely. The machine's display will indicate if the lid is not properly closed.
4.5 Setting Powder Ratio
The correct powder setting is crucial for accurate formula preparation. Refer to the Baby Brezza website's 'Formula Pro Settings Finder' to determine the specific setting for your formula brand and type. Press the 'powder setting' button on the control panel to adjust the setting as needed.
4.6 Setting Temperature
Press the 'temp' button to cycle through the available temperature options (e.g., room temperature, body temperature, warmer). Select the desired temperature for your baby's bottle.
5. Operation
5.1 Dispensing Formula
- Place a clean baby bottle on the adjustable drip tray. Ensure the bottle is centered under the dispensing funnel.
- Press the 'ml/oz' button to select the desired amount of formula (e.g., 60ml, 120ml, 210ml).
- Press the 'Start' button. The machine will dispense the formula.
- Once dispensing is complete, remove the bottle, cap it, and gently shake to ensure thorough mixing. Always check the temperature before feeding your baby.
5.2 Dispensing Water Only
If you need warm water only (e.g., for mixing pre-measured formula powder or other uses), press the 'water only' button, select the desired amount, and press 'Start'.
6. Cleaning and Maintenance
Regular cleaning is essential for hygiene and optimal performance of your Baby Brezza Formula Pro.
6.1 Daily Cleaning (Dispensing Funnel)
The dispensing funnel should be cleaned after every 4 bottles dispensed. Remove the funnel by pulling it out. Wash it with warm soapy water, rinse thoroughly, and dry completely before reinserting. The machine will prompt you when cleaning is due.
6.2 Weekly Cleaning (Water Tank, Formula Container, and other parts)
At least once a week, or more frequently if needed, perform a thorough cleaning:
- Empty any remaining formula powder from the container.
- Disassemble the formula powder container, lid, and mixing parts.
- Remove the water tank and empty any remaining water.
- Wash all disassembled parts with warm soapy water, rinse thoroughly, and allow to air dry completely.
- Wipe the exterior of the base unit with a damp cloth.
- Ensure all parts are completely dry before reassembling.
7. Troubleshooting
- Machine not dispensing: Check if the water tank is filled, the formula container lid is closed, and the dispensing funnel is clean and properly inserted. Ensure the bottle is pushed all the way back on the drip tray.
- Formula consistency issues: Verify that the correct powder setting is selected for your specific formula brand and type. Ensure the dispensing funnel is clean and free of clogs.
- Error messages: Refer to the Baby Brezza user manual for a complete list of error codes and their solutions.
8. Specifications
| Product Dimensions | 18.4 x 14.8 x 10 inches |
| Item Weight | 9.6 ounces |
| Item Model Number | FRP0046 |
| UPC | 886267005015 |
| Manufacturer | Baby Brezza |
| Color | White |
Image 3: Side view of the Baby Brezza Formula Pro FRP0046, illustrating its compact size and design.
9. Warranty and Support
For warranty information, product registration, or technical support, please visit the official Baby Brezza website or contact their customer service department. Keep your purchase receipt as proof of purchase.
Baby Brezza Official Website: www.babybrezza.com
