Bailey NH.Z020A

Bailey Blue Dolphin LED Neon Night Light (Model NH.Z020A) Instruction Manual

Model: NH.Z020A | Brand: Bailey

Introduction

Thank you for purchasing the Bailey Blue Dolphin LED Neon Night Light. This manual provides essential information for the safe and efficient use of your new decorative light. Please read these instructions carefully before use and retain them for future reference.

This LED neon light is designed to create a warm and romantic atmosphere, perfect for various decorative purposes in bedrooms, kids' rooms, parties, or as a general home accent. It features dual power options for convenience and is built with energy efficiency in mind.

Safety Information

  • Use this product carefully to avoid damaging the lamp.
  • If the product will not be used for a long time, store the lamp in a cool, dry place and remove the batteries.
  • The battery case is not waterproof. Avoid exposure to water or moisture.
  • This product is intended for indoor use only.
  • Do not use this neon light as a substitute for everyday lighting. It is primarily for decorative purposes.
  • Ensure proper ventilation around the device.
  • Keep out of reach of children unless supervised.

Package Contents

Please check the package for the following items:

  • 1 x Dolphin LED Neon Light
  • 1 x Base
  • 1 x USB Cable
  • Note: 3 x AA batteries are not included and must be purchased separately.
Diagram showing the Dolphin LED Neon Light, its base, USB cable, and battery compartment.

Figure 1: Package contents and power options. The image displays the dolphin neon light, its base with an ON/OFF switch, a USB cable, and a battery box requiring 3 AA batteries (not included).

Setup

Follow these steps to set up your Dolphin LED Neon Night Light:

  1. Assemble the Light: Carefully insert the Dolphin LED Neon Light into the slot on the provided base. Ensure it is securely seated.
  2. Choose Power Source:
    • Battery Power: Open the battery compartment on the underside of the base. Insert 3 AA batteries (not included), ensuring correct polarity (+/-). Close the compartment securely.
    • USB Power: Connect the included USB cable to the USB port on the base. Plug the other end of the USB cable into a compatible USB power source, such as a computer, power bank, phone charger, or USB wall socket.
  3. Placement: Place the assembled light on a stable, flat surface in your desired location.
Image showing the Dolphin LED Neon Light separated from its base, with the USB cable detached.

Figure 2: Dolphin light and base assembly. The image shows the dolphin light detached from its base, highlighting the connection point and the USB cable.

Diagram illustrating various USB power sources for the neon light.

Figure 3: USB power options. This diagram shows a USB plug and various compatible power sources including a notebook PC, power bank, phone charger, and USB socket.

Operating Instructions

To operate your Dolphin LED Neon Night Light:

  1. Power On: Locate the ON/OFF switch on the base of the light. Slide the switch to the "ON" position to illuminate the dolphin neon light.
  2. Power Off: To turn off the light, slide the switch to the "OFF" position.
A blue dolphin shaped LED neon light illuminated on its white base.

Figure 4: Illuminated Dolphin LED Neon Light. The image shows the blue dolphin light glowing brightly on its base.

Maintenance

Proper maintenance ensures the longevity of your LED neon light:

  • Cleaning: Gently wipe the light and base with a soft, dry cloth. Do not use abrasive cleaners or solvents.
  • Battery Replacement: If using battery power and the light dims or stops working, replace all 3 AA batteries with new ones, ensuring correct polarity.
  • Storage: When not in use for extended periods, remove batteries and store the light in a cool, dry place away from direct sunlight and moisture.

Troubleshooting

ProblemPossible CauseSolution
Light does not turn on.
  • Batteries are dead or incorrectly inserted.
  • USB cable is not properly connected or power source is faulty.
  • ON/OFF switch is in the "OFF" position.
  • Replace batteries with new ones, ensuring correct polarity.
  • Check USB cable connection and try a different USB power source.
  • Slide the ON/OFF switch to the "ON" position.
Light is dim.Low battery power.Replace batteries or switch to USB power.
Light flickers.Loose connection or low battery.Check all connections. Replace batteries or try USB power.

Specifications

FeatureDetail
Model NameNH.Z020A
BrandBailey
ShapeDolphin
Light ColorBlue
MaterialPlastic
Product Dimensions21cm x 10cm x 18.5cm (8"W x 6"H x 1"D)
Item Weight0.2 KG (3.2 ounces)
Wattage1.8 watts
Power Source3 x AA Batteries (not included) / USB Cable
Service Life5000H
Indoor/Outdoor UsageIndoor
Water Resistance LevelNot Water Resistant
Diagram showing the dimensions of the dolphin neon light and its base.

Figure 5: Product dimensions. The image displays the height (16cm), width (21cm), and base dimensions (10cm diameter, 3.5cm height) of the dolphin light.

Warranty

Specific warranty information is not provided in the product details. Please refer to the retailer's return policy or contact the manufacturer directly for warranty details.

Support

If you have any questions or require assistance with your Bailey Blue Dolphin LED Neon Night Light, please contact Bailey Lighting customer service through the retailer's platform or visit the official Bailey store online.

For more information, you may visit the Bailey Store.

Related Documents - NH.Z020A

Preview Bailey Solar LED Light String - User Manual and Installation Guide
Comprehensive guide for the Bailey Solar LED Light String (Model 145439), covering specifications, safety warnings, operation, installation, and charging methods. Features outdoor use, automatic dusk-to-dawn operation, and adjustable brightness.
Preview Bailey AGL E27 A60 24V 40W Matt Light Bulb Specifications
Comprehensive technical specifications for the Bailey AGL E27 A60 24V 40W Matt incandescent light bulb, detailing its electrical, physical, and performance attributes. Includes ETIM classification and alternative product suggestions.
Preview VITEK DensiCHEK System Description and Basic Operations
This document provides a comprehensive overview of the VITEK DensiCHEK system, detailing its components, operation, and software interface. It covers the Display Base, Connectivity Base, and Pod, along with their functionalities and how they interact with the VITEK 2 FLEXprep software. The guide includes information on system setup, configuration, and performance ranges for various suspension types.
Preview Nu-Heat ALPRC10 10mm Fastflo Installation Guide
Comprehensive installation instructions for the Nu-Heat ALPRC10 10mm Fastflo underfloor heating system, designed for acoustic floors on concrete or beam and block sub-bases. Covers floor preparation, panel laying, pipe installation, and various floor covering methods.
Preview Darby Home Co 2-Tier Solar Fountain User Manual - Operation & Assembly Guide
Comprehensive user manual for the Darby Home Co 2-Tier Solar Fountain, covering setup, operation modes (solar and battery), maintenance, troubleshooting, and technical specifications. Learn how to enjoy your solar-powered fountain day and night.