Superfish E6090191

Superfish Pro Koi Automatic Pond Fish Feeder User Manual

Brand: Superfish | Model: E6090191

Introduction

Thank you for choosing the Superfish Pro Koi Automatic Pond Fish Feeder. This device is designed to automatically dispense food to your pond fish, ensuring they are fed regularly even when you are away. Please read this manual carefully before installation and operation to ensure proper use and longevity of the product.

Superfish Pro Koi Automatic Pond Fish Feeder in its packaging, showing the feeder unit and control panel.

Figure 1: Superfish Pro Koi Automatic Pond Fish Feeder in its retail packaging.

Safety Information

  • Ensure the power supply is suitable for the device and is connected to a protected outdoor electrical outlet.
  • Do not immerse the control unit or feeder in water. The feeder is designed for outdoor use but the control unit should be mounted in an easily accessible, protected location.
  • Keep out of reach of children and pets.
  • Do not use with flake or stick foods, as this may cause clogging. Only use granules between 2-9 mm.
  • Always disconnect power before performing any maintenance or cleaning.

Package Contents

Upon opening the package, please verify that all components are present and undamaged:

  • Superfish Pro Koi Automatic Pond Fish Feeder unit (hopper and dispensing mechanism)
  • Control unit with display and buttons
  • Mounting bracket (suitable for wall, post, or ground mounting)
  • 10-meter power cable
  • Installation instructions (basic guide)
Superfish Pro Koi Automatic Pond Fish Feeder with its box, showing the main unit and control panel.

Figure 2: Contents of the Superfish Pro Koi Automatic Pond Fish Feeder package.

Setup

  1. Choose a Mounting Location: Select a suitable location near your pond. The feeder can be mounted on a wall, a sturdy post, or directly on the ground using the provided mounting bracket. Ensure the location allows the dispensed food to fall directly into the pond.
    Superfish Pro Koi Automatic Pond Fish Feeder mounted by a pond, showing its outdoor placement.

    Figure 3: Feeder installed by a pond, demonstrating typical placement.

  2. Install the Mounting Bracket: Securely attach the mounting bracket to your chosen surface (wall, post, or ground) using appropriate fasteners (not included, depending on surface type). The bracket is 47.5 cm long.
    Superfish Pro Koi Automatic Pond Fish Feeder with its control unit connected, showing the mounting arm.

    Figure 4: Feeder unit attached to the mounting arm with the control unit connected.

  3. Attach the Feeder Unit: Slide the feeder unit onto the mounting bracket until it is securely in place.
  4. Connect the Control Unit: The control unit is connected to the feeder via a cable. Mount the control unit in an easily accessible position, ensuring it is protected from direct heavy rain or extreme weather if possible, although it is designed for outdoor use.
    Close-up of the Superfish Pro Koi Automatic Pond Fish Feeder control panel with 'DOWN manual', 'SET', and 'UP' buttons.

    Figure 5: Close-up view of the control unit for programming.

  5. Fill the Hopper: Open the lid of the feeder and fill the hopper with suitable fish food granules. The hopper has a capacity of 7 liters and is designed for granules between 2 mm and 9 mm. Do not use flake or stick foods.
    Side view of the Superfish Pro Koi Automatic Pond Fish Feeder, showing the hopper and dispensing mechanism.

    Figure 6: Side view of the feeder, illustrating the hopper capacity.

  6. Connect to Power: Plug the 10-meter power cable into a suitable outdoor electrical outlet.

Operating Instructions

The Superfish Pro Koi Automatic Pond Fish Feeder allows for flexible programming of feeding times and volumes.

Programming Feeding Schedules:

The feeder can be programmed to dispense between 1 and 24 meals per day. Refer to the control unit (Figure 5) for button layout.

  1. Set Time: Use the "SET" button to enter programming mode. Use "UP" and "DOWN" buttons to adjust the current time. Press "SET" again to confirm.
  2. Program Meal Times: In programming mode, you can set up to 24 individual feeding times. For each meal, use "UP" and "DOWN" to set the desired hour and minute. Press "SET" to move to the next setting.
  3. Adjust Feeding Volume: For each programmed meal, you can adjust the volume of food dispensed. This is typically done by setting the duration of the dispensing mechanism's operation. Experiment to find the appropriate volume for your fish.
  4. Save Settings: Once all desired meals are programmed, exit programming mode (usually by holding "SET" or waiting for it to time out). The feeder will now operate according to your schedule.

Manual Feeding:

The control unit typically includes a "DOWN manual" button (refer to Figure 5). Pressing this button will dispense a single, manual portion of food outside of the programmed schedule.

Important Note on Food Type:

This feeder is specifically designed for fish food granules ranging from 2 mm to 9 mm. It is not suitable for flake or stick foods, as these can clog the dispensing mechanism and lead to malfunction.

Maintenance

  • Cleaning: Regularly wipe the exterior of the feeder and control unit with a damp cloth to remove dust and debris. Ensure no water enters the control unit.
  • Hopper Cleaning: Periodically empty the hopper and clean it to prevent food residue buildup, which can attract pests or affect food quality. Ensure the hopper is completely dry before refilling.
  • Dispensing Mechanism: Check the dispensing mechanism regularly for any obstructions. If food is not dispensing correctly, disconnect power and carefully inspect the mechanism for blockages.

Troubleshooting

ProblemPossible CauseSolution
Feeder not dispensing food.No power; hopper empty; food type incompatible; mechanism clogged.Check power connection; refill hopper; ensure granules are 2-9mm; clear any blockages in the dispensing mechanism.
Food dispensing irregularly.Incorrect programming; food moisture; partial blockage.Re-check programming settings; ensure food is dry; inspect for partial blockages.
Control unit display is off.No power.Verify power connection to the outlet and to the control unit.

Recommendation: Before leaving for an extended period, we strongly recommend a full week of testing the feeder to ensure it operates reliably according to your programmed schedule and dispenses the correct amount of food.

Specifications

  • Model Number: E6090191
  • Dimensions (L x W x H): 28.5 x 48.5 x 31.5 cm
  • Weight: 3.5 kg
  • Hopper Capacity: 7 Liters
  • Compatible Granule Size: 2 - 9 mm
  • Power Cable Length: 10 meters
  • Mounting Bracket Length: 47.5 cm
  • Feeding Frequency: 1 to 24 meals per day
  • Material: Plastic
  • Color: Black
  • Recommended Use: Outdoor, for garden pond fish

Warranty

The Superfish Pro Koi Automatic Pond Fish Feeder comes with a 2-year warranty from the date of purchase. This warranty covers defects in materials and workmanship under normal use. Please retain your proof of purchase for warranty claims. The warranty does not cover damage caused by misuse, neglect, improper installation, or use of incompatible food types (e.g., flakes or sticks).

Support

For technical assistance, troubleshooting beyond this manual, or warranty claims, please contact your retailer or the Superfish customer support directly. Refer to the Superfish official website for the most up-to-date contact information and additional resources.

You can find more information and support at: www.superfish.com

Related Documents - E6090191

Preview SuperFish Koi Pro Fish Feeder User Manual
A comprehensive user manual for the SuperFish Koi Pro Fish Feeder, detailing its functions, installation, programming, and maintenance. Learn how to set feeding times, quantities, and calculate daily food requirements for your pond fish.
Preview SuperFish Koi Pro Fish Feeder User Manual
User manual for the SuperFish Koi Pro Fish Feeder, an automatic fish feeder. This document provides instructions on safety, installation, programming, maintenance, and feeding guidelines for optimal fish health.
Preview SuperFish Solar Fish Feeder User Manual
This user manual provides instructions for the SuperFish Solar Fish Feeder, covering general information, safety guidelines, installation, operation, programming, and maintenance. It details how to set the current time, spread distance, feeding times, and dosing times for automatic fish feeding.
Preview SuperFish Aqua Pro Feeder Automatic Aquarium Feeder User Manual
Detailed user manual for the SuperFish Aqua Pro Feeder, covering setup, programming, installation, maintenance, warranty, and recycling information for automatic aquarium fish feeding.
Preview SuperFish Pond Catalogue 2023: Filters, Pumps, and Pond Equipment
Explore the SuperFish Pond Catalogue 2023, featuring a comprehensive range of pond filters, energy-efficient pumps, UVC clarifiers, aeration systems, lighting, and essential accessories for a healthy and beautiful pond.
Preview SuperFish Koi Pro Combi Drum Motor Replacement Guide
Step-by-step instructions for replacing the motor on your SuperFish Koi Pro Combi Drum filter. Includes tools required, detailed procedures, and final checks for safe and proper operation.