Introduction
This manual provides instructions for the CHOUBENBEN Replacement Remote Control, Model 20190506213. This remote is designed to be compatible with various Hitachi Air Conditioner models, including RAS-R13C-1, RAS-30CP1R, RAS-14CH, RAC14CH2, RAS-10C9, RAS-13C9, RAS-18C9, RAS-25CNH2, and RAC-32CNH2. Please read this manual carefully before use to ensure proper operation and longevity of your remote control.
Product Overview
Image: The CHOUBENBEN Replacement Remote Control, Model 20190506213. This remote is a direct replacement for original Hitachi air conditioner remotes, featuring standard function buttons for temperature, mode, and fan speed control.
Setup
Battery Installation
The remote control requires two (2) AAA batteries for operation. Batteries are not included with the remote control and must be purchased separately.
- Locate the battery compartment on the back of the remote control.
- Slide the battery cover downwards or in the direction indicated by an arrow to open it.
- Insert two AAA batteries, ensuring the positive (+) and negative (-) terminals match the diagrams inside the compartment.
- Slide the battery cover back into place until it clicks securely.
Note: Ensure batteries are inserted correctly to prevent damage to the remote control.
Operating Instructions
This remote control operates your Hitachi air conditioner by sending infrared signals. Ensure there is a clear line of sight between the remote and the air conditioner's receiver. The maximum effective range is approximately 9 meters.
Basic Functions
- POWER Button: Press to turn the air conditioner ON or OFF.
- MODE Button: Cycles through operating modes such as Auto, Cool, Dry, Fan, and Heat (if supported by your AC unit).
- TEMP ▲/▼ Buttons: Adjusts the temperature setting. The display shows temperature in Celsius only.
- FAN Button: Adjusts the fan speed (e.g., Low, Medium, High, Auto).
- SWING Button: Controls the louver swing function (if available on your AC unit).
- TIMER Button: Sets the ON/OFF timer for the air conditioner. Refer to your air conditioner's manual for specific timer programming details.
Note: Some advanced functions may vary depending on your specific Hitachi air conditioner model.
Maintenance
- Cleaning: Wipe the remote control with a soft, dry cloth. Do not use liquid cleaners or abrasive materials.
- Battery Replacement: Replace batteries when the remote control's range decreases or it stops responding. Always replace both batteries at the same time with new AAA batteries.
- Storage: If the remote control will not be used for an extended period, remove the batteries to prevent leakage and damage.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Remote not responding | Dead or incorrectly inserted batteries. Obstruction between remote and AC unit. | Replace batteries with new AAA batteries, ensuring correct polarity. Remove any obstructions. Ensure remote is pointed directly at the AC unit. |
| Limited range | Weak batteries. Interference. | Replace batteries. Ensure no strong light sources or electronic devices are interfering with the signal. |
| AC unit not performing requested function | Function not supported by AC unit. Remote malfunction. | Refer to your air conditioner's original manual to confirm supported functions. If other functions work, the remote may be faulty. |
Specifications
| Brand | CHOUBENBEN |
| Model Number | 20190506213 |
| Compatible Air Conditioner Models | Hitachi RAS-R13C-1, RAS-30CP1R, RAS-14CH, RAC14CH2, RAS-10C9, RAS-13C9, RAS-18C9, RAS-25CNH2, RAC-32CNH2 |
| Power Source | 2 x AAA Batteries (not included) |
| Maximum Range | 9 Meters |
| Temperature Display | Celsius only |
| Item Weight | 90 Grams |
Warranty and Support
For any questions, concerns, or support regarding your CHOUBENBEN Replacement Remote Control, please feel free to contact the seller directly. If you are not clear about our item, please reach out for assistance.