1. Introduction
This manual provides essential information for the proper installation, operation, and maintenance of your JBL A500HI 6x9 inch 3-Way Car Speakers. Please read this manual thoroughly before using the product to ensure optimal performance and longevity.
2. Product Overview
The JBL A500HI speakers are designed to deliver high-quality audio in a vehicle environment. They feature a 3-way design for comprehensive sound reproduction, including a woofer, midrange, and tweeter.
- Speaker Type: 6" x 9" 3-Way Speaker
- Maximum Power: 500W Peak, 75W RMS
- Cone Material: IMPP (Injection-molded polypropylene) cone for durability and accurate bass response.
- Tweeter: PEI Balanced Dome Tweeter for clear high-frequency sound.
- Frequency Response: 45Hz to 20kHz
- Sensitivity: 92dB (2.83v@1m)
- Impedance: 4 Ohm
- Built-in Crossover: Ensures proper frequency distribution to each speaker component.
Image: Front and rear view of the JBL A500HI 6x9 inch 3-Way Car Speakers. The front shows the speaker cone with the JBL logo, and the rear shows the magnet structure with model number and power ratings.
3. Package Contents
Verify that all items are present in the package:
- 2 x JBL A500HI 6x9 inch 3-Way Car Speakers
- Installation Accessories (e.g., screws, clips, wiring)
- 1 x Owner's Manual (this document)
4. Setup and Installation
Proper installation is crucial for optimal sound performance and product longevity. If you are unfamiliar with car audio installation, it is recommended to seek professional assistance.
- Safety First: Disconnect the vehicle's battery before starting any electrical work to prevent short circuits and damage.
- Speaker Location: Identify suitable mounting locations in your vehicle. The JBL A500HI speakers are 6x9 inch oval speakers, typically installed in rear decks or door panels. Ensure adequate depth and clearance.
- Mounting:
- Carefully remove existing speakers or prepare the mounting surface.
- Use the provided installation accessories to secure the speakers firmly. Avoid overtightening screws.
- Wiring:
- Connect the speaker wires to your car audio system's speaker outputs. Observe correct polarity (positive to positive, negative to negative) to ensure proper phase and sound quality.
- The speakers have an impedance of 4 Ohms. Ensure your amplifier or head unit can safely drive a 4-Ohm load.
- Route wires away from moving parts, sharp edges, and heat sources. Secure them to prevent rattling or damage.
- Testing: Before reassembling interior panels, reconnect the vehicle battery and test the speakers with your audio system. Verify that both speakers are producing sound and that the sound quality is as expected.
- Reassembly: Once satisfied with the installation and sound, carefully reassemble any removed interior panels.
5. Operating Instructions
The JBL A500HI speakers are passive components and operate in conjunction with your car's head unit or amplifier. No direct user controls are present on the speakers themselves.
- Audio Source: Play audio through your car's head unit (e.g., radio, CD, USB, Bluetooth, Auxiliary input).
- Volume Control: Adjust the volume level via your head unit. Avoid excessively high volumes that cause distortion, as this can damage the speakers.
- Tone Controls: Utilize your head unit's equalizer or tone controls (bass, treble, balance, fader) to customize the sound to your preference. Start with flat settings and make small adjustments.
- Power Handling: The speakers have a 75W RMS power handling and 500W peak power. Ensure your amplifier's output matches these specifications to prevent underpowering or overpowering, both of which can lead to speaker damage.
6. Maintenance
Regular maintenance helps preserve the appearance and performance of your speakers.
- Cleaning: Use a soft, dry cloth to gently wipe dust from the speaker grilles and cones. Do not use abrasive cleaners, solvents, or excessive moisture.
- Environmental Protection: While designed for car environments, avoid exposing speakers to extreme temperatures, direct sunlight for prolonged periods, or excessive moisture. The speakers are not waterproof.
- Inspection: Periodically check speaker connections for tightness and ensure no wires are frayed or exposed.
7. Troubleshooting
If you encounter issues with your JBL A500HI speakers, refer to the following common problems and solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| No sound from speakers |
|
|
| Distorted sound |
|
|
| Weak or no bass |
|
|
If problems persist after attempting these solutions, contact JBL customer support or a qualified car audio technician.
8. Specifications
| Model | A500HI |
| Speaker Type | 6" x 9" 3-Way Car Speaker |
| Maximum Output Power | 500 Watts Peak |
| RMS Power | 75 Watts |
| Impedance | 4 Ohm |
| Frequency Response | 45 Hz - 20 kHz |
| Sensitivity (2.83v@1m) | 92 dB |
| Material | IMPP Cone; PEI Dome Tweeter |
| Product Dimensions (D x W x H) | 7.6D x 15.2W x 22.9H Centimeters |
| Item Weight | 3.105 kg (3105 Grams) |
| Connectivity Technology | Wired |
| Mounting Type | Flush Mount |
| Compatible Devices | Car Audio System, MP3 Player, Smartphone (with AUX cable) |
| Water Resistance Level | Not Water Resistant |
| Country of Origin | China |
9. Warranty and Support
JBL products are manufactured by Harman International Industries, Inc.
- Warranty Type: Limited Warranty. Please refer to the warranty card included with your product or visit the official JBL website for detailed warranty terms and conditions.
- Manufacturer: Harman International Industries, Inc.
- Importer (India): Harman International (India) Pvt Ltd, Prestige Technology Park, 4th Floor, Jupiter 2A, Marathali Ring Road, Bangalore 560103, India.
For technical support, service, or warranty claims, please contact your local authorized JBL dealer or visit the official JBL support website.
