Keter Delivery Box (Model: Package) Instruction Manual

1. Introduction

The Keter Delivery Box is designed to provide a secure and weather-resistant solution for receiving packages at your home. Its intuitive design and clear markings ensure that delivery personnel can easily deposit packages, protecting them from theft and environmental elements. The unique one-way, two-tray system ensures that once a package is deposited, it can only be retrieved by the owner using a padlock.

2. Safety Information

• Ensure the delivery box is placed on a stable, level surface.
• For enhanced security and stability, anchor the box to the ground or add weight to the designated bottom chamber.
• Keep children and pets away from the box during assembly and operation to prevent injury.
• Do not climb on or stand inside the delivery box.

3. Package Contents

Verify that all components are present before beginning assembly. The Keter Delivery Box typically includes:

• Side panels (2)
• Front panel (1)
• Back panel (1)
• Base panel (1)
• Top lid assembly (1)
• Bottom retrieval door (1)
• Internal one-way tray mechanism (1)
• Hardware kit (screws, anchors, etc.)
• Instruction manual

4. Setup and Assembly

Assembly of the Keter Delivery Box is designed to be straightforward with snap-together components. Follow the visual instructions provided in the included manual for detailed steps.

4.1. General Assembly Steps

1. Unpack all components and lay them out on a clean, flat surface.
2. Identify each panel (sides, front, back, base, top lid, bottom door, internal tray).
3. Connect the side panels to the base panel, ensuring they snap securely into place.
4. Attach the back and front panels to the assembled sides and base.
5. Install the internal one-way tray mechanism according to the diagrams.
6. Attach the bottom retrieval door.
7. Secure the top lid assembly.
8. Ensure all connections are firm and secure.

4.2. Securing the Delivery Box

To prevent unauthorized removal or tipping, it is recommended to secure the delivery box.

• Weighting: The bottom hidden chamber can be filled with sand, gravel, or bricks to add significant weight.
• Anchoring: Use the included screws to anchor the box directly into the ground or a solid surface.

5. Operating Instructions

5.1. Package Deposit (for Delivery Personnel)

The Keter Delivery Box features clear 'PACKAGES' markings to guide delivery personnel. To deposit a package:

1. Lift the top lid of the delivery box.
2. Place the package onto the internal tray.
3. Close the top lid. The package will automatically drop into the secure storage compartment below, inaccessible from the top.

5.2. Package Retrieval (for Owner)

To retrieve your packages:

1. Locate the bottom retrieval door on the front of the box.
2. If a padlock is used, unlock it.
3. Open the bottom door to access the stored packages.
4. Remove your packages and close the door securely. Re-engage the padlock if used.

5.3. Official Product Video

6. Maintenance

The Keter Delivery Box is constructed from weather-resistant resin, requiring minimal maintenance.

• Cleaning: Wipe down the exterior with a damp cloth and mild soap as needed. Avoid abrasive cleaners that could damage the resin.
• Inspection: Periodically check all connections and moving parts (lid, doors, tray) to ensure they are functioning correctly and are free from obstructions.
• Weather Protection: While weather-resistant, prolonged exposure to extreme conditions may benefit from occasional inspection and cleaning to maintain appearance.

7. Troubleshooting

• Difficulty during assembly: Ensure all panels are correctly oriented and aligned before applying pressure to snap them into place. Refer to the visual diagrams carefully.
• Top lid not closing properly: Check for any obstructions on the internal tray or around the lid's hinges. Ensure the one-way mechanism is not jammed.
• Bottom door not opening/closing smoothly: Inspect the hinges and latch for debris or damage. Lubricate if necessary with a silicone-based spray.
• Packages getting stuck: Ensure packages are not excessively large or irregularly shaped, which could impede the one-way drop mechanism.
• Water ingress: While designed to be waterproof, check for any gaps in assembly or damage to the resin if water is found inside. Ensure the lid is fully closed.

8. Specifications

9. Warranty and Support

For warranty information, product support, or to inquire about replacement parts, please contact Keter customer service directly. Refer to the product packaging or the official Keter website for the most up-to-date contact details.