1. Introduction
This manual provides essential information for the safe and efficient installation, operation, and maintenance of your CATA TFH 6630 WH integrated cooker hood. Please read these instructions carefully before using the appliance and retain them for future reference. Proper use and care will ensure optimal performance and longevity of your cooker hood.

Image 1.1: Front view of the CATA TFH 6630 WH cooker hood in its closed position.
2. Safety Information
For your safety and to ensure correct operation, please observe the following precautions:
- Ensure the electrical installation complies with local regulations.
- Do not allow children to operate the appliance.
- Regularly clean the filters to prevent fire hazards.
- Do not flambé under the cooker hood.
- Ensure adequate ventilation in the room when the cooker hood is used simultaneously with gas or other fuel-burning appliances.
- Disconnect the appliance from the main power supply before any cleaning or maintenance.
- If the power cord is damaged, it must be replaced by the manufacturer, its service agent, or similarly qualified persons to avoid a hazard.
3. Package Contents
Upon unpacking, please verify that all components are present and undamaged:
- CATA TFH 6630 WH Cooker Hood Unit
- Instruction Manual
- Mounting hardware (screws, anchors, etc. - typically included for integrated installation)
- Grease filters (pre-installed)
4. Setup and Installation
The CATA TFH 6630 WH cooker hood is designed for integrated mounting, offering a seamless look in your kitchen. Installation should be performed by a qualified technician to ensure safety and proper functionality.
4.1. Pre-Installation Checks
- Verify that the mounting surface is strong enough to support the hood's weight (7.5 kg).
- Ensure sufficient space for the hood's dimensions (46 x 59.8 x 22.15 cm).
- Confirm availability of a suitable electrical outlet (240V).
- Prepare the exhaust ducting. The hood is compatible with 150/125 mm diameter ducts.
4.2. Mounting
Follow the detailed diagrams and instructions provided in the included installation guide. The hood is designed for easy and quick installation into a cabinet or custom housing.

Image 4.1: Technical drawing showing the dimensions (in mm) for installation of the CATA TFH 6630 WH cooker hood.
4.3. Electrical Connection
Connect the hood to a grounded electrical outlet. Ensure the voltage matches the appliance's requirements (240V). The brushless motor operates efficiently with a maximum consumption of 90W.
5. Operating Instructions
Your CATA TFH 6630 WH cooker hood features a user-friendly touch control panel for intuitive operation.
5.1. Control Panel Overview

Image 5.1: Detailed view of the touch control panel and digital display.
The touch control panel includes:
- Power Button: To turn the hood on/off.
- Extraction Level Selection: Use the up/down arrows to cycle through 6 extraction levels (5 standard + 1 TURBO mode). The digital display will show the current level.
- Timer Function: Activates an automatic shut-off timer. Press the timer button to set the desired duration.
- Light Control: Activates and adjusts the dimmable LED lighting.
- Filter Cleaning Indicator: An icon will illuminate to remind you when the grease filters require cleaning.
5.2. Extraction Levels
The hood offers 6 extraction levels to suit various cooking needs:
- Levels 1-5: Standard operating speeds for everyday cooking.
- TURBO Mode: Provides maximum extraction power (up to 605 m³/h) for intense cooking fumes. This mode operates at a maximum pressure of 315 Pa.
5.3. Lighting
The integrated LED lighting is highly efficient and dimmable, providing clear visibility over your cooking area. Use the light control button on the panel to adjust brightness.

Image 5.2: The CATA TFH 6630 WH cooker hood seamlessly integrated into a kitchen environment.
6. Maintenance and Cleaning
Regular maintenance ensures the efficiency and longevity of your cooker hood.
6.1. Grease Filter Cleaning
The filter cleaning indicator on the control panel will alert you when the grease filters need attention. Depending on usage, filters should be cleaned every 2-4 weeks.
- Removal: Open the hood's front panel to access the filters. Carefully unlatch and remove the metal grease filters.
- Cleaning: Wash the filters by hand in hot soapy water or in a dishwasher on a low-temperature cycle. Ensure they are completely dry before re-installation.
- Re-installation: Insert the dry filters back into their slots and secure the latches.

Image 6.1: View of the cooker hood with the front panel open, showing the removable grease filters.
6.2. Exterior Cleaning
Clean the exterior surfaces of the hood with a soft cloth and a mild, non-abrasive detergent. Avoid using harsh chemicals or abrasive pads, especially on the stainless steel finish.
7. Troubleshooting
Before contacting customer service, please consult the following table for common issues and their solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| Hood does not turn on. | No power supply. | Check if the hood is plugged in and the circuit breaker is on. |
| Low extraction power. | Clogged grease filters. Insufficient room ventilation. | Clean or replace grease filters. Ensure windows or doors are slightly open for air intake. |
| Excessive noise. | Loose components. Obstruction in ducting. | Check for loose screws or parts. Inspect ducting for blockages. |
| LED lights not working. | Faulty LED module. | Contact qualified service personnel for replacement. |
8. Technical Specifications
| Feature | Specification |
|---|---|
| Model Number | 02010301 |
| Mounting Type | Integrated |
| Control Type | Touch Panel (Digital Display) |
| Voltage | 240 Volts |
| Power (Motor) | 90 Watts (Max) |
| Total Power | 93 Watts |
| Weight | 7.5 Kilograms |
| Dimensions (L x W x H) | 46 x 59.8 x 22.15 cm |
| Material | Stainless Steel |
| Color | White |
| Noise Level | 47 dB(A) |
| Extraction Capacity (Max) | 605 m³/h |
| Extraction Capacity (Min) | 210 m³/h |
| Maximum Pressure | 250 Pa (315 Pa in TURBO mode) |
| Exhaust Duct Compatibility | 150/125 mm |
| Energy Efficiency Class | A+ |
| Lighting | Dimmable LED |
9. Warranty and Support
For information regarding product warranty, returns, or technical support, please refer to the specific terms and conditions provided at the point of purchase or contact CATA customer service directly.
If you purchased this product through Amazon, please consult Amazon's return policy for details on returning a product within 30 days if you change your mind, or for handling defective/damaged products. Specific marketplace seller policies may also apply.
For direct assistance with your CATA TFH 6630 WH cooker hood, please visit the official CATA website or contact their authorized service centers.





