1. Introduction
This manual provides detailed instructions for the assembly, use, and maintenance of your Habitdesign Adapta XL Reversible Multiposition Desk. Designed for versatility, this desk features a clean aesthetic and offers multiple configuration options to suit various spaces and needs. It includes a storage unit with two doors and four open compartments, which can be positioned on either the right or left side, and configured in a straight or L-shape layout.
Image 1.1: The Adapta XL desk configured in an L-shape, showcasing its design and storage capabilities.
2. Safety Information
Please review the assembly manual carefully for specific safety instructions. It is possible that the furniture may require anchoring to a wall for stability. Always use appropriate fastening devices suitable for your wall type. Detailed safety information is provided within the assembly manual included with your product.
3. Setup and Assembly
Assembly of the Habitdesign Adapta XL desk is required. While not overly complex, it does require attention to detail and patience. It is recommended to have a second person assist with assembly.
3.1. Before You Begin
- Unpack and Organize: Carefully unpack all components. Take a few minutes to organize the hardware (screws, dowels, etc.) into separate groups.
- Identify Parts: Refer to the parts list in your included assembly manual. Some pieces may look similar; use the provided measurements to correctly identify each component.
- Tools Required: A screwdriver (an electric screwdriver is highly recommended), a hammer, and a drill (for specific pre-marked holes if indicated in the manual) are typically needed.
3.2. Configuration Options
The Adapta XL desk offers four main assembly options due to its reversible and multiposition design:
- L-Shape (Corner) Configuration: The storage unit can be placed on either the right or left side of the main desk surface, forming an L-shape.
- Straight (Extended) Configuration: The storage unit can be aligned with the main desk surface, extending its length.
Follow the specific diagrams in your assembly manual for your desired configuration. Pay close attention to the orientation of the boards and the placement of hardware.
Image 3.1: Example of the desk in an L-shape configuration.
Image 3.2: Example of the desk in a straight configuration.
4. Operating and Usage
The Habitdesign Adapta XL desk is designed for various uses, including studying, working, and gaming. Its multiposition feature allows you to adapt your workspace as needed.
4.1. Storage Unit
The integrated storage unit provides ample space with two doors and four open compartments. These compartments are suitable for storing books, binders, office supplies, or decorative items. Fabric storage boxes (not included) can be used to enhance organization and aesthetics.
Image 4.1: Detail of the storage unit with an open door.
4.2. Weight Capacity
- Maximum supported weight for the furniture: 25 kg
- Maximum supported weight per shelf: 3 kg
Do not exceed these weight limits to ensure the stability and longevity of the desk.
5. Maintenance
The desk is constructed from high-quality melamine particle board, which features a non-porous and highly resistant surface. This material makes the furniture easy and quick to clean.
- Cleaning: Wipe the surfaces with a damp cloth. Avoid using abrasive cleaners or harsh chemicals, as these can damage the finish.
- Spills: Promptly clean any spills to prevent staining or damage to the material.
6. Troubleshooting
This section addresses common concerns that may arise during or after assembly.
6.1. Assembly Difficulties
- Missing or Damaged Parts: If you find any parts missing or damaged upon unpacking, contact Habitdesign customer support immediately for assistance.
- Difficulty with Instructions: If the assembly instructions are unclear, re-read the steps carefully and refer to the diagrams. Ensure all pieces are correctly identified and oriented before fastening.
- Loose Screws/Wobbling: Ensure all screws are tightened securely. Avoid over-tightening, which can damage the particle board. If the desk wobbles, check that all connections are firm and that the floor is even. The desk includes anti-scratch and noise-reducing pads; ensure these are properly installed.
6.2. Stability Issues
The desk is designed to be stable. If you experience instability, verify that:
- All components are correctly assembled according to the manual.
- The desk is placed on a flat, even surface.
- The maximum weight limits for the desk and shelves are not exceeded.
7. Specifications
| Feature | Detail |
|---|---|
| Brand | Habitdesign |
| Model Number | 0L4606A |
| Color | Blanco - Gris |
| Material | Engineered Wood (Melamine Particle Board) |
| Dimensions (L-shape) | 74 cm (H) x 136 cm (W) x 139 cm (D) |
| Dimensions (Straight) | 74 cm (H) x 203 cm (W) x 66 cm (D) |
| Desk Surface Dimensions | 74 cm (H) x 136 cm (W) x 66 cm (D) |
| Storage Unit Dimensions | 71.5 cm (H) x 136 cm (W) x 33 cm (D) |
| Product Weight | 48.8 kg |
| Max. Supported Weight (Furniture) | 25 kg |
| Max. Supported Weight (Shelf) | 3 kg |
| Special Features | Large Storage Capacity, Reversible, Anti-noise and Anti-scratch Pads, Multiple positions (In-line or Corner) |
| Certification | PEFC Certified (Spanish Association for Forest Sustainability) |
Image 7.1: Detailed dimensions of the desk in an extended configuration.
Image 7.2: Detailed dimensions of the desk in an L-shape configuration.
8. Warranty and Support
For specific warranty information regarding your Habitdesign Adapta XL desk, please refer to the documentation included with your purchase or contact Habitdesign directly through their official website or customer service channels. For any assembly questions, missing parts, or other support needs, please reach out to Habitdesign customer support.
