1. Introduction
This manual provides comprehensive instructions for the installation, operation, and maintenance of your Bemis Aurora 200E4 346 Round Slow Close Toilet Seat. Please read these instructions carefully before beginning installation or use to ensure proper function and longevity of the product.
Image 1.1: The Bemis Aurora Round Slow Close Toilet Seat, shown in Biscuit color with the lid closed.
2. Product Features
The Bemis Aurora toilet seat is designed with several features to enhance user experience and simplify maintenance:
- Slow Close Technology: The Whisper Close hinge allows the seat and lid to close slowly and quietly, preventing slamming and potential finger pinching.
- Easy Clean & Change Hinges: Designed for quick removal of the seat from the toilet bowl, facilitating thorough cleaning and easy replacement.
- STA-TITE Seat Fastening System: Ensures the seat remains firmly attached to the toilet bowl, preventing shifting.
- Super Grip Bumpers: Additional bumpers provide stability and prevent the seat from moving on the toilet bowl.
- Precision Seat Fit: Offers front-to-back adjustability for optimal alignment with the toilet bowl.
- Durable Plastic Construction: Made from solid, resilient plastic with molded-in color, resistant to chips, wear, and stains.
Image 2.1: Overview of the Bemis Aurora toilet seat's primary features.
3. Dimensions and Compatibility
This Bemis Aurora toilet seat is designed for standard round toilet bowls. Please verify your toilet's dimensions before installation.
Image 3.1: Key dimensions for the Round Bemis Aurora toilet seat.
3.1. Color Compatibility
The Biscuit color of this seat is designed to complement various toilet manufacturers' colors. Refer to the table below for common matches:
Image 3.2: Biscuit color compatibility chart for various toilet brands.
4. Setup and Installation
Follow these steps for proper installation of your Bemis Aurora toilet seat. An installation video may be available on the product page for visual guidance.
- Prepare the Toilet: Ensure the toilet bowl is clean and free of any old hardware.
- Insert Bolts: Place the bolts through the holes in the toilet bowl.
- Attach Hinges: Align the seat's hinges with the bolts and push down to secure.
- Tighten Nuts: From underneath the toilet bowl, hand-tighten the nuts onto the bolts. Use a wrench for final tightening until the seat is secure and does not shift. The STA-TITE system is designed to prevent overtightening by snapping off when the correct torque is reached.
Image 4.1: Step-by-step guide for easy installation.
For a detailed installation guide, please refer to the official Installation Manual (PDF).
5. Operating Instructions
5.1. Slow Close Feature
The slow close mechanism is integrated into the hinges. For the slow close function to operate correctly, the seat must be fully installed on the toilet bowl. Simply push the seat or lid down gently, and it will lower itself quietly and slowly without requiring manual guidance.
Image 5.1: Explanation of the slow close feature operation.
6. Maintenance and Cleaning
Proper cleaning and maintenance will preserve the finish and functionality of your toilet seat.
- Cleaning: To maintain the seat's glossy finish, clean with mild soap and water. Acceptable cleaning agents include anti-bacterial wipes, dish soap, or anti-bacterial hand soap.
- Avoid Harsh Chemicals: Do not use bleach, abrasive cleaners, or harsh chemicals, as these can damage the plastic and finish.
- Easy Removal for Cleaning: Utilize the Easy Clean & Change hinges to remove the seat for thorough cleaning of both the seat and the toilet bowl area.
Image 6.1: Recommended cleaning practices for your toilet seat.
7. Troubleshooting
This section addresses common issues you might encounter with your toilet seat.
- Seat Shifts or Wiggles: If the seat moves, ensure the STA-TITE fasteners are properly tightened. The nuts should be tightened until they snap off, indicating the correct torque has been applied. If the issue persists, check that the Super Grip Bumpers are correctly positioned and intact.
- Slow Close Mechanism Not Working: Ensure the seat is fully installed and secured to the toilet bowl. The slow close feature relies on proper installation. If the mechanism stops working after extended use, it may indicate wear.
- Difficulty Removing Seat for Cleaning: Ensure the Easy Clean & Change hinges are disengaged correctly. Refer to the installation instructions for proper removal technique.
8. Specifications
| Attribute | Detail |
|---|---|
| Brand | Bemis |
| Model Number | 200E4 346 |
| Material | Plastic |
| Shape | Round |
| Color | Biscuit |
| Product Dimensions | 17.37"L x 14.38"W |
| Item Weight | 4.4 pounds |
| UPC | 073088156600 |
| Included Components | (1) Toilet Seat & Hardware |
9. Warranty Information
Bemis Manufacturing Company provides a manufacturer's warranty that covers purchases for 1 year for customers in the US and Canada. Please retain your proof of purchase for warranty claims.
For complete warranty details, please refer to the official Warranty (PDF) document.
10. Support
For further assistance, product inquiries, or troubleshooting not covered in this manual, please contact Bemis customer support. Contact information can typically be found on the Bemis official website or product packaging.
