1. Introduction
This manual provides essential instructions for the proper setup, operation, and maintenance of your Ochoos replacement remote control for Fujitsu air conditioners. This remote is designed to function as a direct replacement for the original unit, offering reliable control over your air conditioning system. Please read this manual thoroughly before use to ensure optimal performance and longevity of your remote control.
2. Setup
2.1 Battery Installation
The remote control requires two AAA batteries (not included). Follow these steps to install the batteries:
- Locate the battery compartment cover on the back of the remote control.
- Press down on the tab and slide the cover off.
- Insert two new AAA batteries, ensuring that the positive (+) and negative (-) terminals align correctly with the markings inside the compartment.
- Slide the battery compartment cover back into place until it clicks securely.
Important: Do not mix old and new batteries. Do not mix different types of batteries. Remove batteries if the remote will not be used for an extended period.

Figure 1: Battery compartment with cover removed, showing battery slots.
3. Operating Instructions
3.1 Basic Operation
Once batteries are installed, the remote control is ready for use. Point the remote control directly at the infrared receiver on your Fujitsu air conditioner. Press the desired function buttons to control your unit.
3.2 Compatible Models
This remote control is compatible with the following Fujitsu air conditioner models:
- ASY9USCCW
- ASY12USCCW
- ASAG09LJC
- ASAG12LJC
- RS12UC
- ASH12LSACW
- RSG12LKC
If your specific model number is not listed, please refer to the 'Warranty and Support' section for assistance.

Figure 2: Back of the remote control, indicating model information and battery requirements.
4. Maintenance
4.1 Cleaning
To clean the remote control, wipe it with a soft, dry cloth. Do not use abrasive cleaners, solvents, or chemical wipes, as these can damage the surface or internal components.
4.2 Storage
Store the remote control in a cool, dry place away from direct sunlight and extreme temperatures. If storing for an extended period, remove the batteries to prevent leakage.
5. Troubleshooting
If your remote control is not functioning as expected, please check the following:
- No response from AC unit: Ensure the remote has fresh AAA batteries installed correctly. Check that there is a clear line of sight between the remote control and the air conditioner's infrared receiver. Obstructions can block the signal.
- Intermittent operation: Replace batteries with new ones. Ensure the remote is within the effective operating range (up to 9 meters).
- Incorrect functions: Verify that your air conditioner model is listed as compatible in Section 3.2.
If problems persist after checking these points, please contact customer support.
6. Specifications
| Feature | Specification |
|---|---|
| Brand | Ochoos |
| Compatible Devices | Fujitsu Air Conditioners |
| Connectivity Technology | Infrared (IR) |
| Battery Type | 2 x AAA (not included) |
| Maximum Range | 9 Meters |
| Number of Buttons | 12 |
| Item Weight | 80 Grams |
| Special Feature | Ergonomic design |
7. Warranty and Support
7.1 Warranty Information
This Ochoos remote control comes with a 3-month warranty from the date of purchase, covering manufacturing defects. Please retain your proof of purchase for warranty claims.
7.2 Customer Support
If you have any questions, require assistance, or if your air conditioner model is not listed in this manual, please do not hesitate to contact our customer support. We have a wide range of remote controls and can help confirm compatibility or provide further guidance.
For support, please refer to the contact information provided by your retailer or on the product packaging.