Lorelli Maxi Plus Convertible Baby Bed Instruction Manual

Introduction

This manual provides detailed instructions for the assembly, operation, and maintenance of your Lorelli Maxi Plus Convertible Baby Bed. This versatile furniture piece is designed to adapt to your child's growth, transforming from a baby crib with a changing station into a youth bed, desk, and chest of drawers. Please read all instructions carefully before assembly and use to ensure safe and proper operation.

Safety Information

Your child's safety is paramount. Please adhere to the following safety guidelines:

• Always follow assembly instructions precisely. Incorrect assembly can lead to hazards.
• Ensure all screws and fasteners are securely tightened before use and check periodically.
• Do not use the crib if any parts are broken, torn, or missing. Contact customer support for replacement parts.
• The crib is designed for infants from birth to approximately 6 months, or until the child can push up on hands and knees, whichever comes first.
• The youth bed configuration is suitable for children up to 14 years of age.
• Use only a mattress that fits snugly in the crib (recommended size: 62 cm x 1.10 m x 10 cm, not included).
• Keep small parts, plastic bags, and packaging materials away from children to prevent choking or suffocation hazards.
• Do not place the crib near windows where cords from blinds or drapes could strangle a child.
• The product features a non-toxic paint finish, compliant with EN 716 1-2-:08 standards for children's furniture.
• The rails and posts are coated with a special embossed wallpaper suitable for teething, protecting both the child's teeth and the furniture.

Package Contents

Before beginning assembly, verify that all components are present. The package should include:

• Crib frame and components
• Changing table unit with drawers
• Youth bed conversion parts
• Desk conversion parts
• All necessary hardware (screws, dowels, etc.)
• Detailed step-by-step assembly manual

If any parts are missing or damaged, please contact Lorelli customer support immediately.

Setup and Assembly

Assembly is required for this product. Please follow the detailed step-by-step instructions provided in the included assembly manual. High-quality fittings are included for easy and quick installation.

Initial Crib Assembly with Changing Table:

1. Unpack all components and lay them out on a clean, soft surface to prevent scratches.
2. Begin by assembling the main crib frame according to the diagrams.
3. Attach the rocking mechanism to the crib base. Ensure it can be locked into a stationary position.
4. Assemble the changing table unit, including the three smaller drawers.
5. Attach the changing table to either side of the crib, as preferred. The changing table features protective side wood.
6. Install the automatic locking rail mechanism.
7. Adjust the mattress support to one of the three available levels.
8. Ensure all connections are secure and stable.

Image: The Lorelli Maxi Plus Convertible Baby Bed in its initial crib configuration, featuring a white crib with grey accents, an integrated changing table, and storage drawers below.

Operating Instructions

Crib Mode (0-6 Months):

• Rocking Mechanism: The crib includes a rocking function for infants aged 0 to 6 months. To activate, unlock the mechanism. To stabilize, engage the lock.
• Adjustable Mattress Support: The mattress support can be set at 3 different heights. Adjust the height as your child grows to prevent them from climbing out. The highest position is for newborns, and the lowest for older infants.
• Automatic Locking Rail: The side rail features an automatic locking mechanism for safety. Ensure it is securely locked when the child is in the crib.
• Changing Table: The integrated changing table can be used for diaper changes. Its dimensions are 42 cm x 71 cm x 62 cm. It can be positioned on either side of the crib.

Conversion to Youth Bed, Desk, and Chest of Drawers (Up to 14 Years):

As your child grows, the Maxi Plus bed can be converted into a complete youth room set. This conversion allows for simultaneous use of a youth bed, a desk, and a chest of drawers. Refer to the detailed assembly manual for specific conversion steps.

1. Disassembly: Carefully disassemble the crib and changing table unit.
2. Youth Bed Assembly: Use the provided components to assemble the youth bed. This bed is suitable for use up to 14 years.
3. Desk Assembly: The crib frame can be reconfigured to form a functional desk.
4. Chest of Drawers: The changing table unit, once separated from the crib, functions as a standalone chest of drawers or a nightstand. It contains three smaller drawers. The base of the main structure also includes two large drawers.
5. Second Child Crib Option: If you have a second child, the crib can be reassembled and used independently while the older child uses the youth bed and desk.

Image: The Lorelli Maxi Plus Convertible Baby Bed disassembled and reconfigured into a youth bed with drawers, a separate desk, and a chest of drawers.

Maintenance

Proper maintenance ensures the longevity and safety of your Lorelli Maxi Plus Convertible Baby Bed.

• Cleaning: Wipe surfaces with a dry cloth. For stubborn marks, use a slightly damp cloth with mild soap, then dry immediately. Avoid abrasive cleaners or harsh chemicals.
• Inspections: Regularly inspect all parts for wear, damage, or loose fasteners. Tighten screws as needed.
• Teething Protection: The special embossed wallpaper on the rails and posts is designed to withstand teething. If it becomes damaged, contact customer support.
• Storage: If storing the bed for an extended period, disassemble it carefully and store components in a dry, cool place.

Troubleshooting

If you encounter any issues with your Lorelli Maxi Plus Convertible Baby Bed, refer to the following common solutions:

• Wobbly Structure: Check all screws and fasteners. Tighten any that are loose. Ensure all components are correctly aligned according to the assembly manual.
• Rocking Mechanism Not Working: Ensure the locking mechanism is disengaged. Check for any obstructions or damage to the rocking components.
• Drawers Sticking: Ensure the drawer slides are clean and free of debris. Check that the drawers are correctly installed on their tracks.
• Difficulty Converting: Review the specific conversion steps in the assembly manual. Ensure all previous components are fully disassembled before attempting a new configuration.

For issues not covered here, please contact Lorelli customer support.

Specifications

Warranty and Support

For warranty information, please refer to the documentation included with your purchase or contact Lorelli customer service directly. Lorelli products are manufactured with high-quality materials and undergo strict quality control.

Customer Support:

If you have any questions, require assistance with assembly, or need replacement parts, please contact Lorelli customer support. Contact details can typically be found on the product packaging or the official Lorelli website.