Monoprice 136639
Monoprice Steel Computer PC Tower Mobile Stand User Manual
Model: 136639
Brand: Monoprice
Introduction
The Monoprice Steel Computer PC Tower Mobile Stand is designed to optimize your workspace by providing a stable, mobile, and elevated platform for your computer tower. This stand helps reclaim desk space, improves air circulation around your PC, and protects it from dust and potential liquid spills on the floor. Its adjustable width accommodates various computer case sizes, and built-in casters allow for easy repositioning.
Features
- Space Optimization: Moves computer case from desk to floor, freeing up valuable desk space.
- Enhanced Protection: Elevates PC from floor, reducing exposure to dust and liquid spills.
- Improved Airflow: Promotes better air circulation around the computer tower.
- Adjustable Width: Fits most computer cases with widths between 4.7 inches and 8.2 inches.
- Mobility: Equipped with built-in casters for easy movement and access to ports.
- Durable Construction: Made from quality powder-coated steel for long-lasting use.
Package Contents
Please verify that all components are present before assembly:
- Monoprice Steel Computer PC Tower Mobile Stand (Main Frame)
- Adjustable Side Panel(s)
- Casters (Wheels) with locking mechanism
- Thumb Screws (for width adjustment)
- Protective Pads (for inner surfaces)
Image: The Monoprice Steel Computer PC Tower Mobile Stand, showcasing its black powder-coated steel construction and four integrated casters.
Setup and Assembly
The Monoprice PC Tower Mobile Stand requires minimal assembly. Follow these steps to set up your stand:
- Attach Casters: Carefully screw the casters into the designated holes on the underside of the main stand frame. Ensure they are securely tightened.
- Adjust Width: Place your computer tower on the stand. Use the thumb screws to adjust the width of the stand to snugly fit your PC tower. The stand is designed to hold towers between 4.7 inches and 8.2 inches wide.
- Apply Protective Pads: For added protection against scratches, apply the provided protective pads to the inner surfaces of the stand where it will contact your computer tower.
- Secure Tower: Once the width is adjusted, ensure the thumb screws are tightened to secure the tower firmly within the stand.
Image: A view demonstrating the adjustable width feature of the stand, allowing it to accommodate various PC tower sizes.
Image: An underside view of the stand, highlighting the robust casters and the base structure.
Operation
Using your Monoprice PC Tower Mobile Stand is straightforward:
- Positioning: Place the stand with your computer tower in your desired location, typically under a desk or in an accessible area.
- Mobility: To move your computer tower, simply unlock the casters (if applicable) and roll the stand to the new position. This is particularly useful for accessing rear ports or cleaning.
- Stability: Once in position, engage the locking mechanism on the casters to prevent unintended movement.
Image: The mobile stand positioned under a desk, holding a black computer tower, demonstrating its space-saving utility.
Image: Another example of the mobile stand in use, supporting a silver computer tower next to a filing cabinet.
Maintenance
To ensure the longevity and optimal performance of your Monoprice PC Tower Mobile Stand, follow these simple maintenance guidelines:
- Cleaning: Wipe the stand with a soft, damp cloth to remove dust and dirt. Avoid abrasive cleaners or solvents that could damage the powder-coated finish.
- Caster Check: Periodically check the casters for any accumulated debris (e.g., hair, lint) that might hinder smooth movement. Clean as necessary.
- Tightness: Occasionally verify that the thumb screws and caster attachments remain tight to ensure stability.
Troubleshooting
If you encounter any issues with your Monoprice PC Tower Mobile Stand, refer to the following common solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| Stand is wobbly or unstable. | Thumb screws not tightened; casters loose. | Ensure thumb screws are fully tightened to secure the PC tower. Check and tighten all caster attachments. |
| Casters do not roll smoothly. | Debris caught in casters; casters locked. | Inspect casters for hair, lint, or other debris and remove. Ensure caster locks are disengaged. |
| PC tower does not fit. | Tower width outside adjustable range. | Verify your PC tower's width is between 4.7" and 8.2". If not, this stand may not be compatible. |
Specifications
| Attribute | Detail |
|---|---|
| Product Dimensions | 10.8 x 5.5 x 6.2 inches (L x W x H) |
| Adjustable Width Range | 4.7 inches ~ 8.2 inches |
| Item Weight | 3.62 pounds |
| Material | Powder-Coated Steel |
| Color | Black |
| Model Number | 136639 |
Warranty and Support
Monoprice stands behind its products. For warranty information, technical support, or to inquire about replacement parts, please visit the official Monoprice website or contact their customer service directly. Please have your model number (136639) ready when contacting support.
Monoprice Official Website: www.monoprice.com
Ask a question about this manual
Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.