Globe Electric 67135 72" Floor Lamp with Adjustable Reading Light Instruction Manual

Introduction

This manual provides comprehensive instructions for the safe assembly, operation, and maintenance of your Globe Electric 67135 72" Floor Lamp with Adjustable Reading Light. Please read this manual thoroughly before installation and use to ensure proper function and safety. Keep this manual for future reference.

Important Safety Instructions

To reduce the risk of fire, electric shock, or injury to persons, please adhere to the following safety guidelines:

• Read all instructions.
• Do not connect electricity until the lamp is fully assembled.
• Unplug the lamp from the power outlet before cleaning or changing bulbs.
• Do not use this lamp near water or in damp locations.
• Use only the specified bulb types and wattages to avoid overheating.
• Ensure the lamp is placed on a stable, level surface to prevent tipping.
• Keep the power cord away from heated surfaces.
• Do not operate the lamp with a damaged cord or plug.
• This lamp is for indoor use only.

Package Contents

Carefully unpack all components and inspect for any damage. If any parts are missing or damaged, do not proceed with assembly. Contact customer support for assistance.

• Lamp Base
• Pole Sections (multiple)
• Torchiere Lamp Head
• Adjustable Reading Light
• Torchiere Shade (frosted plastic)
• Reading Light Shade (frosted plastic)
• Instruction Sheet (this manual)

Image: Overview of the lamp's dimensions and components.

Assembly Instructions

Follow these steps to assemble your floor lamp:

1. Prepare the Base: Place the lamp base on a flat, stable surface.
2. Assemble the Pole: Carefully thread the power cord through the pole sections. Screw the pole sections together clockwise, starting from the base, ensuring each section is securely tightened. Pull any excess cord from the base as you assemble to prevent slack.
3. Attach Lamp Heads: Screw the torchiere lamp head onto the top pole section. The adjustable reading light is typically pre-attached to one of the upper pole sections.
4. Install Shades: For both the torchiere and reading light, unscrew the socket ring from the bulb holder. Place the frosted plastic shade over the bulb holder and secure it by screwing the socket ring back into place.
5. Insert Bulbs: Refer to the "Bulb Requirements" section for correct bulb types and wattages. Screw the appropriate bulbs into the sockets.
6. Final Placement: Position the assembled lamp in your desired location, ensuring the cord is not pinched or a tripping hazard.

Image: The fully assembled Globe Electric 67135 floor lamp.

Operating Instructions

Once assembled and plugged into a standard 120V outlet, your lamp is ready for use.

Main Torchiere Light

The main torchiere light features a 3-step rotary dimmer switch. Rotate the switch clockwise to cycle through low, medium, and high light settings, and then off. This allows you to adjust the ambient lighting to your preference.

Image: Operating the 3-step rotary dimmer switch.

Adjustable Reading Light

The adjustable reading light has its own separate on/off switch, typically located on the light head or near its base. The flexible gooseneck allows you to direct the light precisely where needed, making it ideal for reading or task lighting.

Image: The adjustable reading light feature.

Bulb Requirements

This lamp requires two E26 medium base bulbs (sold separately).

• Main Torchiere Light: 1x E26 Medium Base, maximum 150W bulb.
• Adjustable Reading Light: 1x E26 Medium Base, maximum 40W bulb.

The lamp is compatible with LED, incandescent, and halogen bulbs. For optimal performance and energy efficiency, LED or incandescent bulbs are recommended.

Image: Examples of suggested E26 medium base bulbs.

Care and Maintenance

Proper care will ensure the longevity and appearance of your lamp.

• Cleaning: Always unplug the lamp before cleaning. Use a soft, dry cloth to wipe down the metal and plastic surfaces. Do not use abrasive cleaners, solvents, or polishes as they may damage the finish.
• Bulb Replacement: Ensure the lamp is unplugged and the bulb has cooled completely before attempting to replace it. Screw in the new bulb firmly but gently.
• Cord Care: Regularly inspect the power cord for any signs of damage. Avoid bending or twisting the cord excessively.

Troubleshooting

If you encounter any issues with your lamp, refer to the following table for common problems and solutions:

Product Specifications

Warranty and Support

This product is sold without a manufacturer's warranty. For any questions, concerns, or assistance with your Globe Electric product, please refer to the contact information provided on the product packaging or visit the official Globe Electric website for customer support resources.