ASHCROFT CF-5031-1939913

ASHCROFT Candida 43" Round Dining Table User Manual

Introduction

This manual provides instructions for the assembly, use, and maintenance of your ASHCROFT Candida Mid Century Modern Style Solid Wood Walnut 43" Round Dining Table. Please read this manual thoroughly before assembly and use to ensure safe and proper operation.

ASHCROFT Candida 43 inch Round Dining Table
Image: The ASHCROFT Candida 43 inch Round Dining Table, showcasing its walnut finish and mid-century modern design.

Safety Information

Please adhere to the following safety guidelines to prevent injury or damage to the product:

  • Read all instructions carefully before assembly and use.
  • Ensure all fasteners are securely tightened before using the table. Periodically check and retighten if necessary.
  • Do not stand or sit on the table.
  • Do not exceed the maximum weight capacity of 250 pounds (approximately 113 kg).
  • Keep small parts away from children during assembly to prevent choking hazards.
  • Proposition 65 Warning: This product can expose you to chemicals including wood dust, which is known to the State of California to cause cancer. For more information go to www.P65Warnings.ca.gov.

Package Contents

Before beginning assembly, verify that all components listed below are present and undamaged. If any parts are missing or damaged, please contact customer support.

  • Tabletop (1)
  • Table Legs (4)
  • Hardware Pack (screws, washers, Allen wrench)
  • Assembly Instructions (this manual)

Setup and Assembly

Assembly is required for this dining table. It is recommended to have two people for easier and safer assembly.

Tools Required:

  • Included Allen wrench
  • Phillips head screwdriver (not included, but may be useful for general tightening)

Assembly Steps:

  1. Carefully unpack all components from the packaging. Place them on a soft, clean, and flat surface (e.g., a blanket or carpet) to prevent scratches or damage during assembly.
  2. Identify the tabletop and the four table legs. Each leg should have pre-drilled holes for attachment.
  3. Attach each of the four table legs to the underside of the tabletop. Align the holes on the leg with the corresponding holes on the tabletop.
  4. Insert the provided screws through the washers and into the pre-drilled holes. Use the included Allen wrench to tighten the screws. Ensure the tapered legs are oriented correctly, splaying outwards for stability.
  5. Tighten all screws securely. Do not overtighten, as this can strip the wood or hardware.
  6. With assistance, carefully turn the assembled table upright.
  7. Gently rock the table to ensure it is stable and level. If there is any wobbling, check that all screws are evenly tightened.
ASHCROFT Candida Dining Table Dimensions
Image: Diagram showing the dimensions of the ASHCROFT Candida Dining Table, useful for understanding component placement during assembly.

Operating and Usage

The ASHCROFT Candida dining table is designed for indoor use in dining rooms, kitchens, or similar living spaces.

  • Place the table on a flat, stable surface to prevent wobbling.
  • The table comfortably seats four adults.
  • Avoid placing excessively hot or cold items directly on the tabletop without protective coasters or placemats.
  • Do not drag the table when moving it; always lift it to prevent damage to the legs or floor.
ASHCROFT Candida Dining Table in a dining setting
Image: The ASHCROFT Candida Dining Table arranged in a dining setting with four chairs, demonstrating its intended use.

Care and Maintenance

Proper care will help maintain the beauty and longevity of your dining table.

  • Cleaning: Wipe the table surface with a soft, damp cloth. Avoid abrasive cleaners, harsh chemicals, or furniture polishes containing silicone, as these can damage the wood finish.
  • Spills: Promptly wipe up any spills, especially liquids, to prevent staining and moisture absorption into the wood.
  • Protection: Always use placemats, coasters, or tablecloths to protect the surface from heat, moisture, scratches, and spills.
  • Wood Care: The table features a water-resistant solid wood type. For long-term care, periodic application of a wood furniture polish or wax suitable for walnut finishes is recommended. Follow the product instructions for application.
  • Legs: Minor scratches or nicks on the solid wood legs can often be touched up with a wood color touch-up pen matching the walnut finish.
  • Sunlight: Avoid prolonged exposure to direct sunlight, which can cause fading or discoloration of the wood finish.
  • Humidity: Maintain a consistent humidity level in your home to prevent wood from expanding or contracting, which can lead to cracks or warping.

Troubleshooting

If you encounter any issues with your dining table, refer to the following common solutions:

  • Table is wobbly:
    • Ensure all leg attachment screws are tightened evenly.
    • Check if the floor surface is uneven. Use furniture pads or shims under the legs if necessary to level the table.
  • Scratches or nicks on surface:
    • For minor scratches, wood repair kits or touch-up pens matching the walnut finish may help minimize their appearance.
    • For deeper damage, professional repair may be required.
  • Screws not aligning during assembly:
    • Ensure the table legs are correctly oriented and not swapped.
    • Loosen all screws slightly, align components, then retighten evenly. Do not force screws.

Specifications

AttributeDetail
Model NameCandida Mid Century Modern Style Solid Wood Walnut 43" Round Dining Table
Model NumberCF-5031-1939913
BrandASHCROFT
Dimensions (D x W x H)43"D x 43"W x 29.5"H
Item Weight45 Pounds (approximately 20.4 kg)
Frame MaterialWood
Top MaterialWood
Finish TypeStained (Walnut)
ShapeRound
Seating Capacity4 adults
Maximum Weight Capacity250 pounds (approximately 113 kg)
Assembly RequiredYes
Indoor/Outdoor UsageIndoor

Warranty Information

This ASHCROFT product is covered by a manufacturer's warranty. For detailed information regarding warranty coverage, terms, and conditions, please refer to the original product description on the retailer's website or visit the official ASHCROFT website. Please retain your proof of purchase for any warranty claims.

Customer Support

For assistance with assembly, missing parts, troubleshooting, or any other inquiries regarding your ASHCROFT Candida Dining Table, please contact our customer service team:

  • Website: For FAQs and additional resources, please visit www.ashcroft.com
  • Email: For support inquiries, email us at support@ashcroft.com
  • Phone: You can reach our support team at 1-800-XXX-XXXX (Monday-Friday, 9 AM - 5 PM EST)

Related Documents - CF-5031-1939913

Preview Ashcroft S10 & S50 RTD and Thermocouple Installation and Maintenance Guide
Provides detailed installation and maintenance instructions for Ashcroft S10 and S50 RTD and Thermocouple temperature sensors. Covers general precautions, storage, specific installation procedures for RTDs and thermocouples, and maintenance guidelines to ensure accurate measurements and longevity.
Preview Ashcroft G2, G3, GV & T2 Pressure Transmitter Instruction Sheet
Instruction sheet for Ashcroft G2, G3, GV, and T2 pressure transmitters, covering electrical terminations, wiring, installation, and safety warnings.
Preview Ashcroft A4 Intrinsically Safe & Non-Incendive Pressure Transmitter: Installation and Safety Instructions
Comprehensive guide for installing and safely operating the Ashcroft A4 Intrinsically Safe and Non-Incendive Rated Pressure Transmitter, including hazardous area guidelines, electrical specifications, and wiring diagrams.
Preview Ashcroft RXLdp Instruction Sheet: Installation and Operation Guide
Detailed instruction sheet for the Ashcroft Model RXLdp low differential pressure transducer, covering safety warnings, description, mounting, piping, power requirements, electrical connections, and dimensions.
Preview Ashcroft ZX12 High Purity Pressure Transmitter: Installation and Maintenance Guide
Comprehensive installation and maintenance instructions for the Ashcroft ZX12 High Purity Pressure Transmitter, covering safety precautions, wiring, operation, calibration, and warranty information.
Preview Ashcroft 700 Series Diaphragm Seal Installation and Maintenance Manual
Comprehensive guide for installing and maintaining Ashcroft 700 Series High-Displacement Diaphragm Seals, covering components, specifications, installation procedures, and troubleshooting.