BAOFENG DM-1701 Dual Band DMR/Analog Two Way Radio Instruction Manual

1. Introduction

The BAOFENG DM-1701 is a versatile dual-band, dual-time slot DMR/Analog two-way radio designed for amateur radio enthusiasts. It offers extensive channel capacity and advanced features for reliable communication. This manual provides essential information for setting up, operating, maintaining, and troubleshooting your DM-1701 radio.

Figure 1: BAOFENG DM-1701 Radio with Included Accessories

2. What's in the Box

Upon unboxing your BAOFENG DM-1701, please ensure all the following items are present:

• DM-1701 Radio Unit
• Antenna
• 2200mAh Lithium-Ion Battery
• Desktop Charger with AC Adapter
• Belt Clip
• Wrist Strap
• Programming Cable (USB)
• PTT Earpiece
• User's Manual (this document)

Figure 2: Contents of the DM-1701 Retail Package

3. Product Features

The DM-1701 radio is equipped with a range of features to enhance your communication experience:

• Digital & Analog Compatibility: Supports both digital (DMR) and analog modes, including dual band operation. FCC Part90 Certification ID: 2AJGM-DM1701.
• Extensive Channel Capacity: Features 3,000 Channels, 10,000 Digital Talk Groups, and 120,000 Contacts.
• OpenGD77 Support: Compatible with OpenGD77 firmware for advanced customization.
• 1.77" Color TFT Display: Provides clear visibility of radio status and menu options.
• Multi-functional Operation: Supports manual programming, DTMF, VFO, SMS, emergency alarm, digital monitor mode, CTCSS and CDCSS, color codes, and DMR encryption.
• Customizable Keys: Five programmable keys for quick access to frequently used features.
• DMO True 2 Time Slot: Direct mode dual slot communication allows two groups of calls on a single frequency, improving efficiency and saving spectrum resources. Compatible with MOTOTRBO Tier I & II and other DMR radios.
• Long Battery Life: Equipped with a 2200mAh Lithium-Ion battery, offering up to 48 hours of standby time and up to 12 hours of working time.
• Durable Design: Features a hardened outer casing with an ergonomic and comfortable design.

Figure 3: DM-1701 Radio Components Overview

Figure 4: Customizable Keys and Programming Software Interface

Figure 5: Battery Life and Standby Time

4. Setup

4.1. Battery Installation and Charging

1. Align the battery pack with the grooves on the back of the radio.
2. Slide the battery upwards until it clicks into place.
3. To remove, push the battery release latch (usually at the bottom of the battery) and slide the battery downwards.
4. Place the radio (with battery installed) into the desktop charger. Ensure the charging contacts align.
5. Connect the AC adapter to the desktop charger and plug it into a power outlet. The indicator light on the charger will show charging status.

4.2. Antenna Installation

Screw the antenna clockwise into the antenna connector on the top of the radio until it is finger-tight. Do not overtighten.

4.3. Initial Power On and Password

Turn the Power/Volume knob clockwise to power on the radio. The initial password for the device is 00000000. You can change or disable this password directly through the keypad menu.

4.4. Software and Firmware Setup

The DM-1701 CPS (Customer Programming Software) supports mass editing of channels and contact IDs, simplifying codeplug creation. Firmware and software upgrades are life-time-free and available from the Radioddity official site. The programming cable is equipped with a driver that supports Windows XP/7/10. macOS is not supported for programming software, but keypad operation is available.

5. Operating the Radio

5.1. Basic Operation

• Power On/Off and Volume: Rotate the top-left knob to power on/off and adjust volume.
• Channel Selection: Rotate the top-right Channel Knob to quickly select channels.
• Push-to-Talk (PTT) Button: Located on the left side of the radio. Press and hold to transmit, release to receive.
• Menu Navigation: Use the Menu button and arrow keys (up/down) to navigate through the radio's menu system. Confirm selections with the 'Confirm' button.

5.2. Digital Mobile Radio (DMR) Functions

The DM-1701 supports DMR operation, offering enhanced audio quality and efficient spectrum usage.

• Talk Groups: Organize communications into specific groups. The radio supports 10,000 Digital Talk Groups.
• Contacts: Store up to 120,000 contacts for direct private calls.
• True 2 Time Slot: Allows two simultaneous conversations on a single frequency, effectively doubling channel capacity.

5.3. Analog Functions

The radio also supports traditional analog communication modes.

• VFO Mode: Allows direct frequency input for analog channels.
• CTCSS/CDCSS: Use these tones for selective signaling in analog mode.

5.4. Advanced Features

• SMS Function: Send and receive text messages between DMR radios.
• Emergency Alarm: Activate an alarm in emergency situations.
• Digital Monitor Mode: Monitor digital traffic on a channel.

Figure 6: Global Communication with DM-1701

Figure 7: Switch Working Mode Anytime (Digital/Analog)

6. Maintenance

• Cleaning: Use a soft, damp cloth to clean the radio's exterior. Do not use harsh chemicals or solvents.
• Battery Care: Avoid overcharging or completely draining the battery. Store the battery in a cool, dry place when not in use for extended periods.
• Antenna Care: Handle the antenna carefully to prevent bending or breaking.
• Water Resistance: The radio has a waterproof rating, but avoid submerging it in water for prolonged periods or exposing it to high-pressure water jets.

7. Troubleshooting

8. Specifications

Figure 8: DM-1701 Size and Weight

9. Warranty and Support

The BAOFENG DM-1701 comes with a standard manufacturer's warranty. For specific warranty details, please refer to the warranty card included in your product packaging or contact BAOFENG customer support.

For technical assistance, software downloads, and firmware updates, please visit the official Radioddity website or contact their customer service. They provide life-time-free firmware and software upgrades for new functions.

Note: The programming software does not support macOS systems. Programming can be done via keypad operation on the device itself.