Qook 7010B 7-Inch Double Din Car MP5 Player User Manual

Introduction

This manual provides detailed instructions for the installation, operation, and maintenance of your Qook 7010B 7-inch Double Din Car MP5 Player. Please read this manual thoroughly before use to ensure proper function and to prevent damage.

Figure 1: Qook 7010B Car MP5 Player with Rearview Camera

Safety Information

Important: Improper installation of this electronic device may lead to short circuits or damage to the unit or vehicle. It is highly recommended to seek professional assistance for installation if you are not familiar with car audio wiring. Always disconnect the vehicle's battery before beginning installation.

Package Contents

Verify that all items are present in the package:

• 1 x Car Stereo MP5 Player
• 1 x Remote Control
• 2 x Wiring Harness
• 1 x User Manual
• 1 x Car Reverse Camera
• 1 x Camera Power Cable

Figure 2: Package Contents

Installation

Unit Dimensions

The Qook 7010B is a universal double din size unit. Panel dimensions are approximately 178mm x 100mm x 65mm (Width x Height x Depth).

Wiring Connections

Carefully connect the wiring harnesses to your vehicle's electrical system. Refer to the wiring diagram below for correct connections. Ensure all connections are secure to prevent malfunctions.

Figure 3: Rear Panel Connections

Figure 4: ISO Connector Wiring Diagram

Key Wiring Connections:

• Power (Yellow): +12V Constant Power Supply
• ACC (Red): +12V Accessory/Switch Power
• Ground (Black): Vehicle Ground
• Brake Line (Brown): Connect to parking brake signal for video playback safety.
• Reverse Input (Pink): Connect to reverse light signal for rearview camera activation.
• Speaker Wires: Connect to corresponding vehicle speakers (Front Right, Front Left, Rear Right, Rear Left).
• Antenna (Blue): Connect to FM antenna.

Rear View Camera Installation

The included rearview camera is waterproof and features 7 LED night vision with a 170° wide viewing angle. Mount the camera securely at the rear of your vehicle, ideally near the license plate. Connect the camera's video output to the unit's video input and its power cable to the vehicle's reverse light circuit so it activates when the vehicle is in reverse.

Operating Instructions

Basic Operation

• Power On/Off: Press the power button (usually labeled O/M) on the front panel or remote control.
• Volume Control: Use the rotary knob or volume buttons on the remote.
• Mode Selection: Tap the 'Mode' icon on the touchscreen or use the remote to switch between FM, Bluetooth, USB, TF Card, and AUX modes.

Figure 5: Front Panel and FM Radio Display

Bluetooth Connectivity

Pair your mobile device with the MP5 player to enable hands-free calling and audio streaming.

1. Turn on Bluetooth on your mobile device.
2. Select the Bluetooth mode on the MP5 player.
3. Search for available devices on your phone and select "CAR BT" or similar.
4. Once paired, you can make/receive calls and play music wirelessly.

FM Radio

In FM mode, you can manually tune or auto-scan for radio stations. The frequency range is 87.5-108.0MHZ.

• Auto Scan (AS/PS): Press to automatically scan and save strong stations.
• Manual Tuning: Use the arrow buttons to adjust the frequency.
• ST/LOC: Switch between stereo/mono reception and local/distance reception.

Media Playback (USB/TF Card/AUX)

Insert a USB disk or TF card (up to 32GB) into the designated slots. The unit supports various audio and video formats:

• Audio Formats: MP3, WMA, OGG, APE, AAC, FLAC, WAV
• Video Formats: RM, RMVB, VOB, DAT, MP1, MP2, DIVX, XVID, MP4, H263, H264, FLV, 3GP, SWF, AVI, ASF, MJPEG

Connect external audio devices via the 3.5mm AUX-in slot.

Rear View Camera Display

When the vehicle is shifted into reverse, the unit will automatically display the feed from the connected rearview camera.

Equalizer (EQ) Settings

Adjust the audio output to your preference using the built-in equalizer modes: Classic, Pop, Rock, Flat, or DSP OFF.

Maintenance

To ensure the longevity and optimal performance of your MP5 player:

• Cleaning: Use a soft, dry cloth to clean the screen and unit. Avoid abrasive cleaners or solvents.
• Temperature: Avoid exposing the unit to extreme temperatures or direct sunlight for prolonged periods.
• Moisture: Keep the unit dry and away from moisture.

Troubleshooting

If you encounter issues with your Qook 7010B, refer to the following common problems and solutions:

If problems persist after attempting these solutions, please contact customer support.

Specifications

Warranty and Support

For warranty information or technical support, please refer to the contact details provided at the point of purchase or visit the official Qook website. Keep your purchase receipt as proof of purchase.