KLARSTEIN Bolero
KLARSTEIN Bolero 2-in-1 Ceiling Fan with Light
Model: Bolero (10028291)
Introduction
This manual provides essential information for the safe and efficient operation of your KLARSTEIN Bolero 2-in-1 Ceiling Fan with Light. Please read these instructions carefully before installation and use, and retain them for future reference.
Image: The KLARSTEIN Bolero ceiling fan with integrated light, featuring maple-veneered blades and a brushed nickel body.
Safety Instructions
- Always disconnect power before installation, cleaning, or maintenance.
- Installation must be performed by a qualified electrician in accordance with local wiring regulations.
- Ensure the ceiling structure can support the fan's weight (approximately 8.5 kg).
- Do not insert objects into the fan blades while in operation.
- Keep children and pets away from the fan during operation.
- Use only E14 bulbs with a maximum wattage of 60W.
- The fan is designed for indoor use only.
Product Overview
The KLARSTEIN Bolero is a versatile 2-in-1 ceiling fan and light fixture, designed to provide both air circulation and illumination. It features five maple-veneered wooden blades and a brushed nickel body, controlled by a convenient remote.
Image: The KLARSTEIN Bolero functions as both a ceiling fan and an integrated light fixture.
Components
- Motor housing (brushed nickel)
- Five wooden blades (maple veneer)
- Frosted glass lampshade
- Ceiling mounting bracket
- Downrod
- Remote control
- Mounting hardware
Setup and Installation
Proper installation is crucial for the safe and efficient operation of your ceiling fan. It is recommended that installation be carried out by a qualified professional.
Pre-Installation Checks
- Verify that all components are present and undamaged.
- Ensure the electrical supply is turned off at the main circuit breaker.
- Confirm the ceiling can support the fan's weight (8.5 kg).
Installation Steps
- Mounting Bracket: Securely attach the ceiling mounting bracket to a sturdy ceiling joist or outlet box capable of supporting the fan's weight.
- Downrod Assembly: Attach the downrod to the motor housing. Ensure all screws are tightened.
- Wiring: Connect the electrical wires from the fan to the household wiring according to the wiring diagram provided in the full PDF manual. Ensure all connections are secure.
- Fan Body Attachment: Carefully lift the fan assembly and attach it to the ceiling mounting bracket.
- Blade Installation: Attach the five wooden blades to the motor housing. Ensure they are securely fastened.
- Lampshade Installation: Install the frosted glass lampshade and insert an E14 bulb (max 60W).
For detailed visual instructions, please refer to the official PDF user manual available for download.
Operating Instructions
The KLARSTEIN Bolero fan is operated using the included remote control.
Image: The remote control allows for easy adjustment of fan speed and light settings.
Remote Control Functions
- Fan ON/OFF: Turns the fan on or off.
- Speed Control: Select from 3 speeds: low, medium, or high.
- Light ON/OFF: Turns the integrated light on or off.
- Rotation Direction: Switches the direction of blade rotation for summer or winter mode.
Summer and Winter Modes
The fan offers two rotation directions to optimize air circulation for different seasons:
- Summer Mode (Downward Airflow): Blades rotate counter-clockwise, creating a downward breeze that provides a cooling effect.
- Winter Mode (Upward Airflow): Blades rotate clockwise, circulating warm air near the ceiling downwards, helping to distribute heat evenly throughout the room.
Image: Illustration of downward airflow for cooling in summer and upward airflow for heat circulation in winter.
Maintenance
Regular maintenance ensures the longevity and optimal performance of your fan.
- Cleaning: Before cleaning, ensure the power supply is disconnected. Wipe the fan blades and motor housing with a soft, damp cloth. Do not use abrasive cleaners or solvents.
- Blade Inspection: Periodically check that all blade screws are tight. Loose blades can cause wobbling and noise.
- Light Bulb Replacement: Ensure the power is off before replacing the E14 light bulb. Allow the bulb to cool completely before handling.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Fan does not start | No power supply; Loose wiring; Remote control battery low. | Check circuit breaker; Verify wiring connections; Replace remote control batteries. |
| Fan wobbles | Loose blades; Uneven blade weight; Improper mounting. | Tighten blade screws; Balance blades (refer to full manual); Re-check mounting. |
| Light does not work | Bulb faulty; Loose wiring; No power to light. | Replace bulb; Check wiring connections; Ensure light function is activated on remote. |
| Remote control not working | Low battery; Obstruction; Remote not paired. | Replace batteries; Remove obstructions; Refer to full manual for pairing instructions. |
Specifications
| Feature | Detail |
|---|---|
| Model Name | Bolero |
| Model Number | 10028291 (VTS6-1200-aosl) |
| Brand | KLARSTEIN |
| Type | 2-in-1 Ceiling Fan with Light |
| Fan Diameter | 134 cm |
| Height (Ceiling to Lamp Base) | 38 cm |
| Weight | 8.5 kg |
| Max Fan Power | 55 W |
| Airflow | Up to 10212 m³/h |
| Max Noise Level | 50 dB |
| Number of Speeds | 3 (Low, Medium, High) |
| Blade Material | MDF with Maple Veneer |
| Body Material | Brushed Nickel |
| Lampshade Material | Frosted Glass |
| Light Socket | E14; Max 60W |
| Power Supply | 220-240V~ / 50-60Hz |
| Control Method | Remote Control |
| Usage | Indoor |
Image: Diagram showing the dimensions of the KLARSTEIN Bolero ceiling fan: 134 cm diameter and 38 cm height.
Warranty and Support
For warranty information, please refer to the documentation provided with your purchase or contact KLARSTEIN customer service.
If you require further assistance, have questions about installation, operation, or troubleshooting, please contact KLARSTEIN support.
An official user manual in PDF format is available for download: Download User Manual (PDF)
Ask a question about this manual
Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.