Sunco Lighting DL_DK56-15W-5K-4PK

Sunco LED Disc Lights User Manual

Model: DL_DK56-15W-5K-4PK

1. Product Overview

The Sunco LED Disc Lights are designed for flush mount ceiling installations, offering efficient and bright illumination. This model, DL_DK56-15W-5K-4PK, provides 1050 lumens of 5000K Daylight white light with a power consumption of only 15W, equivalent to a 75W incandescent bulb. They are dimmable from 10% to 100% and are damp-rated, making them suitable for various indoor environments including bathrooms and kitchens. The lights are ETL certified, ensuring safety and quality.

Four Sunco LED Disc Lights in a pack

Image: A pack of four Sunco LED Disc Lights, showcasing their compact, round design.

2. Key Features

  • High Brightness & Energy Efficiency: Delivers 1050 lumens at 5000K Daylight, consuming only 15W, significantly reducing energy consumption compared to traditional lighting.
  • Dimmable: Seamless dimming capabilities from 10% to 100%, allowing adjustment of light intensity to suit any mood or decor.
  • Easy Installation: Designed for direct wiring to 4" or 6" junction boxes, eliminating the need for a can. Can also be installed into existing recessed cans using TP24 and E26 connectors.
  • True Color Rendering: Features a high Color Rendering Index (CRI90+) for accurate and vibrant color representation.
  • Damp Rated: Suitable for use in damp locations such as bathrooms, kitchens, and covered patios.
  • Long Lifespan: Engineered for a long operational lifetime, reducing the need for frequent replacements.
Super Bright LED Disk Light features: 1050 Lumens, 110 degree Beam Angle, 15W Wattage

Image: Visual representation of the light's key specifications: 1050 Lumens, 110° Beam Angle, and 15W Wattage.

Dimmable LED light with a dimmer switch showing 10% to 100% dimming range

Image: Illustration of the light's dimmable feature, showing a range from 10% to 100% brightness controlled by a dimmer switch.

3. Installation Guide

Sunco LED Disc Lights offer versatile installation options to fit various ceiling setups. Always ensure power is turned off at the circuit breaker before beginning any electrical work.

Installation Options:

  1. Direct Wire to Junction Box:

    This method is ideal for new installations or when replacing existing fixtures connected directly to a junction box. Connect the light's wires to the corresponding wires in your junction box using wire nuts. Secure the disc light to the junction box using the provided screws.

  2. Installation into Existing Recessed Can (TP24 Connector):

    For existing recessed cans, use the TP24 connector. Insert the connector into the can's socket, then push the disc light into the can. The spring clips on the disc light will secure it in place.

  3. Installation into Existing Recessed Can (E26 Connector):

    Similar to the TP24 method, but using the E26 screw-in adapter. Screw the E26 adapter into the can's socket, then connect the disc light to the adapter and secure it with the spring clips.

Diagram showing three installation methods for Sunco LED Disc Lights: Junction Box + Wire Nuts, TP24 Can Connection + spring clips, and E26 Can Connection + spring clips.

Image: Visual guide illustrating the three primary installation methods for the LED Disc Lights.

Installation Video:

Video: An overview of the 5/6 inch LED Disc Light, demonstrating its features and installation process. This video is provided by Sunco Lighting.

For detailed step-by-step instructions, please refer to the official Installation Manual (PDF).

4. Operating Instructions

Once installed, operating your Sunco LED Disc Lights is straightforward. These lights are designed for seamless integration with compatible dimmer switches, allowing you to control the brightness level.

Dimming Functionality:

The lights are fully dimmable from 10% to 100%. To adjust the brightness, use a compatible LED dimmer switch (sold separately). Ensure your dimmer switch is designed for LED lighting to prevent flickering or performance issues.

Image showing dimming levels from 10% to 100% with a dimmer switch

Image: Visual demonstration of the light's dimming range, from low to full brightness, controlled by a wall-mounted dimmer.

Color Temperature:

This specific model provides 5000K Daylight illumination, which mimics natural daylight and is ideal for tasks requiring high visibility and alertness. Other color temperatures may be available in different product variants.

5. Maintenance

Sunco LED Disc Lights are designed for minimal maintenance due to their long lifespan and durable construction. Regular cleaning is generally sufficient to maintain optimal performance and appearance.

Cleaning:

  • Before cleaning, ensure the light fixture is turned off and has cooled down.
  • Use a soft, dry, or slightly damp cloth to wipe the surface of the light.
  • Avoid using abrasive cleaners, solvents, or harsh chemicals, as these can damage the finish or the lens.

General Care:

  • Periodically check the light fixture for any loose connections or signs of wear, especially if it's in a high-traffic area or subject to vibrations.
  • Given the long lifespan of LED technology (up to 45 years based on typical usage), bulb replacement is not required.
Sunco LED Disc Light with text '7 Year Coverage' and '45 Years lifetime'

Image: Highlighting the product's 7-year coverage and estimated 45-year lifetime, emphasizing its durability and low maintenance.

6. Troubleshooting

If you encounter issues with your Sunco LED Disc Lights, try the following troubleshooting steps:

Problem Possible Cause Solution
Light does not turn on. No power, loose wiring, faulty switch. Check circuit breaker. Ensure all wire connections are secure. Test the switch.
Light flickers or dims inconsistently. Incompatible dimmer switch, loose connection, circuit overload. Ensure dimmer is LED compatible. Check wiring. Reduce load on circuit. Refer to compatible dimmer list below.
Light is not as bright as expected. Dimmer setting too low, incorrect installation. Adjust dimmer to 100%. Verify correct installation as per instructions.

Compatible Dimmers:

For optimal dimming performance, use one of the following compatible dimmer models:

Lutron Dimmers:

  • MACL-153M
  • DVCL-153P
  • PD-6WCL-WH-P
  • MACL-153MH
  • TGCL-153P
  • DVCL-15PR
  • CTCL-153PDH
  • P-PKG1W
  • DVELV-300P
  • NLV-1000-LA
  • SLV-600P
  • RRD-6CL
  • AYCL-153P
  • P-PKG1WB

Other Compatible Dimmers:

  • Leviton: 6674 600W, 6672 600W, IPL06 600W, DW6HD-1BZ, DSL06-001LZ, IPL06-0110Z, 06674-002-10W, TSM10-012-1LW, RDL06-00110Z, DSE06-001-10Z, DDMX1-011-BLZ, DDE06-BLZ 600W, Sureslide, RHCL453PW
  • Eaton: SAL06P3
  • Wemo: F7C05
  • TP Link: KASA SMART HS220
  • Wattstopper: DCD267
  • Cloud Bay: CBLD001WH

7. Specifications

Attribute Detail
BrandSunco Lighting
Model NumberDL_DK56-15W-5K-4PK
Color Temperature5000K Daylight
Brightness1050 Lumens
Wattage15 Watts (75W Equivalent)
Voltage120 Volts
DimmableYes (10%-100%)
MaterialMetal, Plastic (Shade)
Product Dimensions7.5"L x 1"W x 7.5"H
Item Weight2.4 Pounds
Installation TypeFlush Mount, Direct Wire, Recessed Can
Indoor/Outdoor UsageIndoor (Damp Rated)
Special FeatureShatter resistant
Included ComponentsTP24 and E26 Connectors
Country of OriginChina

8. Warranty and Support

Sunco Lighting stands behind the quality of its products. These LED Disc Lights come with a 7-Year Protection warranty from the manufacturer.

For any questions, technical assistance, or warranty claims, please contact Sunco Lighting's customer support. Their knowledgeable support specialists are available to assist you.

You can find more information and contact details on the official Sunco Lighting Store.

Related Documents - DL_DK56-15W-5K-4PK

Preview Sunco Lighting REMODEL CAN 6" Install Guide and Manual
Comprehensive installation guide and manual for the Sunco Lighting REMODEL CAN 6-inch recessed lighting fixture. Includes easy installation steps, safety warnings, and technical specifications.
Preview Sunco Lighting 2x2 LED Panel Light - Selectable CCT Installation Guide & Manual
Comprehensive installation guide and manual for the Sunco Lighting 2x2 LED Ceiling Panel with Selectable CCT. Learn how to install recessed or suspended fixtures, wiring diagrams, safety warnings, and specifications.
Preview Sunco Lighting 2x2 LED Selectable Ceiling Panel Installation Manual
Comprehensive installation guide for the Sunco Lighting 2x2 LED Selectable Ceiling Panel (PN22_DU-WH-4060K). Learn how to safely install and wire this energy-efficient, dimmable LED fixture with selectable wattage and color temperature options.
Preview Sunco Lighting LED Troffer Installation Guide
Official installation instructions for Sunco Lighting's 1x4 LED Center Basket Troffer. Includes safety warnings, step-by-step assembly, and wiring diagrams for selectable wattage and CCT models.
Preview Sunco Lighting T8 LED Tube Ballast Bypass (Type B) Installation Guide
A comprehensive installation guide and manual for Sunco Lighting's T8 LED Tube Ballast Bypass (Type B). Includes easy installation steps, specifications, and important warnings for safe and proper setup.
Preview Sunco Lighting 4" Selectable Retrofit LED Installation Manual
Comprehensive installation guide for the Sunco Lighting 4-inch Selectable Retrofit LED, covering components, step-by-step installation, compatible dimmers, technical specifications, safety warnings, and FCC compliance.