AUTOOL Smoke Cone Leak Detector Exhaust Intake Boot Adapter

Introduction

The AUTOOL Smoke Cone Leak Detector Exhaust Intake Boot Adapter, Model LB001, is a versatile tool designed to assist in diagnosing leaks within various automotive systems. This adapter facilitates the use of an automotive smoke machine to identify leaks in areas such as turbo system piping, exhaust systems, and evaporative emissions (EVAP) systems. Its design ensures broad compatibility with a wide range of vehicle intake and exhaust ports, from small cars to heavy trucks.

A black rubber cone-shaped adapter with a flexible hose extending from its narrower end, designed for automotive leak detection.

Key features include:

• New Larger Size: Designed to fit almost all exhaust tips and intake boots, accommodating openings with a diameter from 1 inch (26mm) up to 3.26 inches (83mm).
• Powerful Functionality: Compatible with all automotive smoke machine leak testers for comprehensive leak detection.
• Ease of Use: Simple installation and connection to a smoke machine for quick leak localization.
• Wide Compatibility: Suitable for both car intake/exhaust ports and heavy truck applications, streamlining the diagnostic process.

Setup

Before using the AUTOOL Smoke Cone Leak Detector Exhaust Intake Boot Adapter, ensure your vehicle's engine is cool and safe to work on. You will need an automotive smoke machine (not included) to perform leak tests.

1. Identify the Test Area: Determine the specific area of the vehicle's intake, exhaust, or EVAP system where you suspect a leak.
2. Prepare the Opening: Ensure the opening is clean and free from debris to allow for a secure fit of the adapter.
3. Install the Adapter: Insert the cone-shaped end of the LB001 adapter into the target opening (e.g., air inlet pipe, exhaust pipe, or oil filler neck for engine tightness test). The flexible rubber material will conform to various sizes.
4. Connect to Smoke Machine: Attach the hose from the LB001 adapter to the output hose of your automotive smoke machine. Ensure a tight connection to prevent smoke leakage at the connection point.

Operating Instructions

Once the adapter is securely installed and connected to a smoke machine, you can proceed with the leak detection process. Always follow the safety guidelines provided with your smoke machine.

1. Activate Smoke Machine: Turn on your automotive smoke machine according to its operating instructions.
2. Inject Smoke: Allow the smoke machine to inject smoke through the LB001 adapter into the system being tested.
3. Observe for Leaks: Carefully inspect the entire system for any visible smoke escaping. Smoke indicates a leak point. Pay close attention to connections, hoses, and seams.
4. Identify Leak Location: Once smoke is observed, pinpoint the exact location of the leak.
5. Turn Off Smoke Machine: After identifying all leaks, turn off the smoke machine and disconnect the adapter.

Typical Applications:

• Intake System Test: Insert the adapter into the intake manifold or air filter box opening to check for leaks in the intake system.
• Engine Tightness Test: Use the adapter with the oil filler neck to test the engine's internal tightness.
• Exhaust System Test: Insert the adapter into the exhaust pipe to check for leaks in the exhaust system.
• EVAP System Test: Connect to appropriate EVAP system ports to diagnose leaks.

Visual guide illustrating the four main steps of using the AUTOOL Smoke Cone Adapter for leak detection: preparing the system, inserting the adapter, connecting the smoke machine, and observing smoke for leaks.

Maintenance

To ensure the longevity and optimal performance of your AUTOOL Smoke Cone Leak Detector Exhaust Intake Boot Adapter, follow these simple maintenance guidelines:

• Cleaning: After each use, wipe down the adapter with a clean, damp cloth to remove any residue or contaminants. Avoid using harsh chemicals that could damage the rubber material.
• Storage: Store the adapter in a cool, dry place away from direct sunlight and extreme temperatures. Keep it free from kinks or excessive pressure that could deform the rubber.
• Inspection: Periodically inspect the adapter for any signs of wear, cracks, or damage to the rubber or hose. Replace the adapter if any significant damage is observed to ensure proper sealing during tests.

Troubleshooting

If you encounter issues while using the AUTOOL Smoke Cone Leak Detector Exhaust Intake Boot Adapter, consider the following common troubleshooting steps:

• No Smoke or Insufficient Smoke:
  • Ensure the smoke machine is properly connected and functioning.
  • Check for a secure seal between the adapter and the vehicle's opening. The adapter must fit snugly.
  • Verify that the smoke machine's fluid reservoir is adequately filled.
• Adapter Does Not Seal Properly:
  • Confirm the opening's diameter is within the adapter's compatible range (1 inch to 3.26 inches).
  • Clean the surface of the opening and the adapter to ensure no debris is preventing a seal.
  • Adjust the adapter's position and apply gentle pressure to achieve a better fit.
• Smoke Escaping from Adapter Connection:
  • Tighten the connection between the adapter's hose and the smoke machine's output.
  • Inspect the hose and connections for any damage or cracks.

For persistent issues, refer to the user manual of your specific automotive smoke machine or contact AUTOOL customer support.

Specifications

The adapter is designed to fit openings from 26mm (1 inch) to 83mm (3.26 inches) in diameter.

Warranty and Support

AUTOOL stands behind the quality of its products. The AUTOOL Smoke Cone Leak Detector Exhaust Intake Boot Adapter comes with a reliable 3-year Product Quality Promise. In the event of damage caused by non-human factors, AUTOOL commits to resending replacement parts free of charge within this 3-year period.

For any inquiries, technical assistance, or support needs, please contact AUTOOL customer service. We aim to respond as soon as possible, typically within 24 hours, to ensure you have the best possible experience with our product.

AUTOOL provides 24/7 customer support and a 3-year warranty, backed by international certifications like CE, FCC, and ROHS.