elxjar BR-AGCF2W Li-MnO2 Battery User Manual

1. Product Overview

The elxjar BR-AGCF2W is a high-performance 6V 2200mAh Lithium Manganese Dioxide (Li-MnO2) battery designed for critical industrial automation and control applications. This battery provides stable power and a long shelf life, making it an ideal replacement for various industrial controllers and programmable logic systems.

Image 1.1: Two elxjar BR-AGCF2W batteries, showcasing their compact design and black connector.

2. Safety Information

WARNING: Improper handling of lithium batteries can lead to fire, explosion, or severe injury. Always follow these safety guidelines:

• DO NOT RECHARGE: This is a primary (non-rechargeable) lithium battery. Attempting to recharge it may cause fire or explosion.
• DO NOT DISASSEMBLE: Do not open, modify, or disassemble the battery. Internal components can be hazardous.
• AVOID SHORT CIRCUITS: Do not short-circuit the battery terminals. This can cause excessive heat and fire.
• TEMPERATURE: Do not expose the battery to extreme temperatures (above 85°C or below -40°C) or direct sunlight.
• IMPACT: Do not drop, puncture, or subject the battery to strong impacts.
• WATER: Keep the battery dry and away from water or other liquids.
• DISPOSAL: Dispose of used batteries according to local regulations. Do not incinerate.
• HANDLING: When replacing, ensure the amplifier power is off and the emergency stop is engaged. Do not touch exposed battery connectors or terminals to avoid electric shock.

Image 2.1: Rear view of the battery highlighting safety warnings and the 'DO NOT RECHARGE' instruction.

3. Product Features

• High Performance: Built with 2200mAh capacity and 6V output using Li-MnO2 chemistry, delivering steady performance and long shelf life for industrial controllers.
• Compact & Easy Install: Measures 45 x 34 x 17 mm and includes a black plug for fast plug-and-play installation into OEM slots.
• Industrial Application: Ideal for Fanuc Beta iSV and SVU amplifiers, A06 CNC controllers, and programmable logic systems used in factory automation.
• Reliable Backup Power: Designed to support critical control systems with reliable, long-term lithium-manganese backup power, helping prevent unexpected shutdowns and data loss.

Image 3.1: Key electrical specifications: 6V Voltage, 2200mAh Capacity, and Lithium Manganese Dioxide (Li-MnO2) Chemistry.

Image 3.2: Physical dimensions and weight of the BR-AGCF2W battery for precise fitment.

4. Specifications

5. Compatibility

The elxjar BR-AGCF2W battery is designed as a direct replacement for various industrial control systems. It is compatible with, but not limited to, the following models:

• Fanuc A98L-0031-0011#L
• GE A06B0177D106
• GE A06B-0177-D106
• Panasonic BR-ACF2P
• Panasonic BR-AGCF2P
• Panasonic BR-AGCF2G

Important: Please ensure both the model and battery compatible part numbers are matched with your device before purchasing and installation.

Image 5.1: Visual reminder to verify compatibility and a close-up of the battery's black connector.

6. Setup and Installation

The BR-AGCF2W battery features a plug-and-play design for straightforward installation. Always prioritize safety during the installation process.

1. Identify Battery Location: Locate the battery compartment or connection point within your industrial controller or system. Refer to your device's specific manual for exact instructions.
2. Power Down System: Crucially, ensure the industrial controller or system is completely powered off and disconnected from its power source. Engage any emergency stop mechanisms.
3. Remove Old Battery: Carefully disconnect and remove the old battery. Note its orientation and connection method.
4. Install New Battery: Align the black connector of the new elxjar BR-AGCF2W battery with the corresponding port in your device. Gently push until it clicks securely into place. Ensure the battery is seated correctly within its compartment.
5. Secure Compartment: Close and secure the battery compartment cover, if applicable.
6. Power On System: Reconnect power to your system and power it on. Verify that the system recognizes the new battery and operates as expected.

Caution: Do not force the connector. Ensure correct alignment to prevent damage to the battery or device.

7. Operating Instructions

As a primary (non-rechargeable) battery, the BR-AGCF2W operates continuously to provide backup power to your industrial system. No specific user operation is required beyond proper installation.

• The battery will automatically provide power to maintain system memory and settings during power outages or when the main power is off.
• Monitor your industrial equipment's indicators for low battery warnings, which signal the need for replacement.

8. Maintenance

The elxjar BR-AGCF2W battery requires minimal maintenance. Adhering to the following guidelines will ensure optimal performance and safety:

• Storage: Store unused batteries in a cool, dry place, away from direct sunlight and extreme temperatures. Keep them in their original packaging until ready for use.
• Inspection: Periodically inspect the battery and its connections for any signs of damage, corrosion, or leakage. If any issues are observed, replace the battery immediately.
• Cleaning: If necessary, gently clean the battery's exterior with a dry, soft cloth. Do not use liquids or abrasive cleaners.
• Replacement: Replace the battery when your system indicates a low battery condition or according to the recommended replacement schedule for your industrial equipment.

9. Troubleshooting

If you encounter issues after installing your elxjar BR-AGCF2W battery, consider the following:

• System Not Powering On/Retaining Settings:
  • Ensure the battery connector is fully and correctly seated.
  • Verify that the battery is the correct model for your device (refer to Section 5: Compatibility).
  • Check for any visible damage to the battery or its connector.
  • Confirm that the main power supply to your industrial system is functioning correctly.
• Battery Life Shorter Than Expected:
  • Ensure the battery was stored correctly before use.
  • Verify that the operating environment temperature is within the specified range for the battery.
  • Confirm that the system's power consumption is within normal parameters.

If troubleshooting steps do not resolve the issue, please contact elxjar customer support.

10. Warranty and Support

Your elxjar BR-AGCF2W battery is backed by a 24-month support policy from the date of purchase. This policy covers manufacturing defects and ensures reliable performance under normal operating conditions.

For warranty claims, technical assistance, or any product-related inquiries, please contact elxjar customer support through the retailer's platform or the official elxjar website.

Please have your purchase details and the product model number (BR-AGCF2W) ready when contacting support.