Sunco Lighting DL_DK56-15W-3K-4PK

Download PDF
Contents

Sunco 5/6 Inch LED Disk Lights Instruction Manual

Model: DL_DK56-15W-3K-4PK

1. Introduction

This manual provides detailed instructions for the safe installation, operation, and maintenance of your Sunco 5/6 Inch LED Disk Lights. Please read this manual thoroughly before installation and retain it for future reference.

Four Sunco 5/6 Inch LED Disk Lights in a pack

Image 1.1: Sunco 5/6 Inch LED Disk Lights (4-Pack). These are flush mount LED fixtures designed for recessed ceiling applications.

2. Safety Information

WARNING: Risk of fire or electric shock. Installation requires knowledge of luminaires electrical systems. If not qualified, do not attempt installation. Contact a qualified electrician.

  • Disconnect power at the circuit breaker before installation or servicing.
  • Do not make or alter any open holes in an enclosure of wiring or electrical components during kit installation.
  • To prevent wiring damage or abrasion, do not expose wiring to edges of sheet metal or other sharp objects.
  • This fixture is intended for installation in accordance with the National Electrical Code (NEC) and local code specifications.
  • Ensure all connections are secure and properly insulated.
  • Do not use with dimmers not listed as compatible. Refer to the compatible dimmer list in Section 6.

3. Package Contents

Verify that all components are present before beginning installation:

  • Sunco 5/6 Inch LED Disk Light(s)
  • TP24 Connector(s)
  • Wire Nuts (for junction box installation)
  • Mounting Screws

4. Specifications

FeatureSpecification
Model NumberDL_DK56-15W-3K-4PK
Size5/6 Inch (7.5" outer diameter, 5.3" inner diameter, 2" thickness)
Wattage15W (equivalent to 75W incandescent)
Brightness1050 Lumens
Color Temperature3000K Warm White
DimmableYes (10%-100%)
Voltage120 Volts
MaterialMetal
Installation TypeFlush Mount (Direct)
Indoor/Outdoor UsageIndoor (Damp Rated)
Special FeaturesShatter resistant, Glare-Free Anti-Yellowing Lens
CertificationsEnergy Star, ETL, FCC, RoHS Compliant
Sunco LED Disk Light showing 1050 Lumens, 110 degree beam angle, and 15W wattage

Image 4.1: Key specifications of the LED Disk Light, including brightness, beam angle, and power consumption.

Diagram showing dimensions of the Sunco LED Disk Light: 7.5 inches overall diameter, 5.3 inches inner diameter, and 2 inches thickness.

Image 4.2: Physical dimensions of the Sunco LED Disk Light, illustrating its compact and ultra-thin design.

5. Installation Instructions

The Sunco LED Disk Lights are designed for easy installation and can be direct wired to a 4" or 6" junction box, or connected to existing recessed cans (TP24 or E26 base). No separate can housing is required.

General Steps:

  1. Turn off Power: Ensure power is disconnected at the circuit breaker before starting any electrical work.
  2. Prepare Wiring: If installing in a junction box, strip wires as needed. If connecting to a recessed can, ensure the existing socket is compatible.
  3. Connect Wires:
    • For Junction Box: Connect the black wire from the fixture to the black (hot) wire from the junction box using a wire nut. Connect the white wire from the fixture to the white (neutral) wire from the junction box using a wire nut. Connect the ground wire from the fixture to the ground wire from the junction box.
    • For TP24 Can: Plug the TP24 connector from the fixture directly into the TP24 receptacle in the recessed can.
    • For E26 Can: Screw the E26 adapter from the fixture into the existing E26 socket in the recessed can.
  4. Mount Fixture: Gently push the spring clips on the sides of the disk light upwards and insert the fixture into the ceiling opening. The spring clips will secure the light in place. Ensure the fixture is flush with the ceiling.
  5. Restore Power: Turn the power back on at the circuit breaker and test the light.
Diagram showing three installation methods for Sunco LED Disk Lights: Junction Box with Wire Nuts, TP24 Can Connection with spring clips, and E26 Can Connection with spring clips.

Image 5.1: Illustration of the three primary installation methods for the LED Disk Lights.

Exploded view of the Sunco LED Disk Light showing adjustable spring clips, included screws, energy-saving LED chips, and a glare-free anti-yellowing lens.

Image 5.2: Detailed view of the light's components, including the adjustable spring clips for secure mounting.

6. Operating Instructions

The Sunco LED Disk Light operates like a standard light fixture. It is designed with seamless dimming capabilities from 10% to 100% when paired with a compatible dimmer switch.

Dimming Functionality:

  • Ensure your wall dimmer switch is compatible with LED lighting and supports 10-100% dimming range.
  • Adjust the dimmer switch to achieve your desired light level.
Image showing a Sunco LED Disk Light and a hand adjusting a dimmer switch, illustrating 10% to 100% dimmable range.

Image 6.1: The LED Disk Light is compatible with most dimmers, allowing for adjustable brightness from 10% to 100%.

Compatible Dimmers:

For optimal performance, use one of the following compatible dimmer models:

Table listing compatible dimmer brands and models, including Lutron and Leviton.

Image 6.2: Part 1 of the list of dimmer switches compatible with Sunco LED Disk Lights.

Table listing additional compatible dimmer brands and models, including Leviton, Eaton, Wemo, TP Link, Wattstopper, and Cloud Bay.

Image 6.3: Part 2 of the list of dimmer switches compatible with Sunco LED Disk Lights.

7. Maintenance

The Sunco LED Disk Lights require minimal maintenance. Follow these guidelines to ensure longevity and optimal performance:

  • Cleaning: Ensure power is off before cleaning. Wipe the fixture with a soft, dry, or slightly damp cloth. Do not use harsh chemicals or abrasive cleaners, as these can damage the finish or lens.
  • Inspection: Periodically check for any loose connections or visible damage. If any issues are found, disconnect power and consult a qualified electrician.
  • Bulb Replacement: This fixture uses integrated LED chips and does not require bulb replacement. The estimated lifetime is 45 years based on 3 hours/day usage.

8. Troubleshooting

If you encounter issues with your LED Disk Light, refer to the following common problems and solutions:

ProblemPossible CauseSolution
Light does not turn on.No power, loose wiring, faulty switch.Check circuit breaker. Ensure all wire connections are secure. Test the switch.
Light flickers or dims inconsistently.Incompatible dimmer, loose wiring, electrical interference.Verify dimmer compatibility (refer to Section 6). Check wiring connections. Consult an electrician if flickering persists.
Light is not as bright as expected.Dimmer setting too low, incorrect wattage.Adjust dimmer to 100%. Confirm the fixture is 15W/1050 Lumens.

If these steps do not resolve the issue, please contact Sunco Lighting customer support.

9. Warranty and Support

Sunco Lighting provides a 7-Year Protection warranty for this product, ensuring quality and reliability. Our products are backed by industry-leading warranties and knowledgeable support specialists.

  • Warranty Type: Manufacturer
  • Coverage: 7 Years
  • Customer Support: For assistance, please visit the official Sunco Lighting website or contact their customer service department.
Image highlighting Sunco's 7-year coverage, 45-year lifetime, reliable customer support, and certifications including USA Company, Energy Star, ETL, FCC, and RoHS.

Image 9.1: Sunco Lighting's commitment to product quality and customer support, including certifications.

Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.