Skullcandy Ink'd+

Download PDF
Contents

Skullcandy Ink'd+ Wired Earbuds with 3.5mm AUX Plug

Instruction Manual

Introduction

Thank you for choosing Skullcandy Ink'd+ Wired Earbuds. These earbuds are designed to provide a comfortable, noise-isolating audio experience with convenient in-line controls. This manual will guide you through the setup, operation, and maintenance of your new earbuds.

Skullcandy Ink'd+ User Guide cover graphic

Figure 1: Skullcandy Ink'd+ User Guide cover graphic.

What's in the Box

  • Ink’d+ Wired Earbuds
  • Ear Gels (Small, Medium)
  • User Manual
Included ear gels (S, M) and 3.5mm AUX plug for Skullcandy Ink'd+ Earbuds

Figure 2: The Skullcandy Ink'd+ package includes the wired earbuds, two different sizes of ear gels (Small and Medium), and a user manual.

Setup

  1. Select Ear Gels: Choose the ear gel size (Small or Medium) that provides the most comfortable and secure fit for your ears. A proper fit is crucial for optimal sound quality and noise isolation.
  2. Connect to Device: Plug the 3.5mm AUX jack into the audio port of your smartphone, tablet, computer, or any compatible audio device.
  3. Adjust Volume: Adjust the volume on your connected device to a comfortable listening level.
Skullcandy Ink'd+ Earbuds worn in ear, showing comfortable fit

Figure 3: The earbuds are designed for a secure and comfortable fit within the ear canal, enhancing the audio experience.

Operating Instructions

The Skullcandy Ink'd+ earbuds feature an in-line microphone and a single-button remote for easy control of your audio and calls.

Skullcandy Ink'd+ Earbuds with in-line microphone and control button

Figure 4: Close-up of the in-line microphone and control button on the Skullcandy Ink'd+ Earbuds cable.

  • Play/Pause Music: Press the button once to play or pause your music.
  • Skip Track Forward: Press the button twice quickly to skip to the next track.
  • Answer/End Call: Press the button once to answer an incoming call or end an active call.
  • Reject Call: Press and hold the button for approximately 2 seconds to reject an incoming call.
  • Activate Voice Assistant: Press and hold the button for approximately 3 seconds to activate your device's voice assistant (e.g., Siri, Google Assistant).

Comfort and Fit

The Ink'd+ earbuds are designed with a noise-isolating fit to enhance your listening experience by reducing external distractions. The included ear gels in Small and Medium sizes allow you to customize the fit for optimal comfort and acoustic performance.

Key features of Skullcandy Ink'd+ Wired Earbuds: Noise Isolating Fit, Microphone, Call and Track Control

Figure 5: Visual representation of the key features including Noise Isolating Fit, Microphone, and Call and Track Control.

Specifications

FeatureDetail
BrandSkullcandy
Model NameINKD_PLUS
Model NumberS2IMY
Connectivity TechnologyWired
Headphone Jack3.5 mm Jack
Ear PlacementIn Ear
Form FactorIn Ear
Noise ControlSound Isolation
MicrophoneIncluded (In-Line)
Control MethodRemote (Single Button)
Impedance16 Ohms
Frequency Range20Hz - 20kHz
Audio Driver Size10 Millimeters
Cable Length4 Feet
Item Weight0.35 Grams
MaterialSilicone, Nylon
Water Resistance LevelNot Water Resistant

Maintenance

  • Cleaning: Gently wipe the earbuds and cable with a soft, dry cloth. Do not use harsh chemicals or abrasive materials.
  • Storage: Store your earbuds in a clean, dry place when not in use. Avoid extreme temperatures.
  • Cable Care: Avoid excessive pulling or bending of the cable to prevent damage.

Troubleshooting

  • No Sound: Ensure the 3.5mm AUX plug is fully inserted into your device. Check your device's volume settings. Try connecting to a different audio source to rule out device issues.
  • Poor Sound Quality: Ensure ear gels are properly seated on the earbuds and in your ears for a good seal. Check for any debris in the earbud nozzles.
  • Microphone Not Working: Ensure the 3.5mm AUX plug is fully inserted. Some devices may require specific settings for external microphones.

Warranty and Support

Your Skullcandy Ink'd+ Wired Earbuds come with a 2-year manufacturer warranty. For warranty claims or additional support, please visit the official Skullcandy website or contact their customer service.

You can find more information and support at the Skullcandy Store on Amazon.

Product Videos

Skullcandy Ink'd+ Earbuds Review: What You Need To Know!

Video 1: A comprehensive review of the Skullcandy Ink'd+ Earbuds, covering key features, performance, and user experience to help you understand the product better.

Skull Candy Ink'd+ vs Kimwood black earbuds - Comparison

Video 2: A comparison video showcasing the Skullcandy Ink'd+ Earbuds alongside Kimwood black earbuds, highlighting their physical attributes and features.

© 2023 Skullcandy. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.