XIHADA Universal Garage Door Opener Remote Cloner

Product Overview

The XIHADA Universal Remote Cloner is designed to replace your original garage door and gate opener remotes. It features 4 independent buttons, allowing you to pair and control up to four different doors or gates separately. This compact remote supports a wide range of frequencies from 280MHz to 868MHz, making it compatible with most major brands and models of dip switches, fixed code, and rolling code systems.

Image: The XIHADA Universal Remote in various usage scenarios, demonstrating its ability to control multiple types of gates and garage doors.

Compatibility Information

Before purchasing and programming, please verify the compatibility of your existing garage door or gate opener remote with the XIHADA Universal Remote. This device is designed to clone most major brands and models. Your original remote must be functional for successful cloning.

Compatible Brands and Models:

The XIHADA Universal Remote is compatible with a broad range of brands and models, including those using dip switches, fixed code, and rolling code technologies. For a detailed list, please refer to the compatibility tables below. If your brand or model is not explicitly listed, please consult the manufacturer's website or support for further assistance.

Image: Page 1 of the compatibility list, showing various brands and models that are compatible with the XIHADA Universal Remote.

Image: Page 2 of the compatibility list, providing additional compatible brands and models for the XIHADA Universal Remote.

Non-Compatible Brands and Models:

The following brands and models are generally not compatible with the XIHADA Universal Remote. Please review this list carefully to avoid compatibility issues:

• Chamberlain / Liftmaster Security 2.0, 2.0+ Garage Door Opener
• Chamberlain Garage door Opener with MYQ / Liftmaster Garage Door Opener with MYQ / AccessMaster Garage with MYQ
• LiftMaster 8500W Garage Door Opener, Liftmaster 892LT, LiftMaster 811LMX, LiftMaster 893LM
• Chamberlain B 6713T Garage Opener / Chamberlain B 6753T Smart Garage Opener
• Genie Pro Screw Drive
• Condo's garage door opener, Ryobi, Softens Doors, Blue Sea, Allister, Amarr, Atoms, Doorking/DKS, Lynx, Merik, Stanley, Skylink, Wayne Dalton, Martin, Saco Gate Opener.

Image: A table listing specific brands and models that are not compatible with the XIHADA Universal Remote.

Setup and Programming

The XIHADA Universal Remote is designed for simple programming. Follow the steps below to clone your existing remote. Note that your original remote must be working to transfer its codes.

Programming Steps (Direct Cloning for Rolling Code Remotes):

1. Clear Existing Codes: Hold down button 1 and press button 2 four times. Release both buttons. The LED on the universal remote will emit a quick flash every 2 seconds, indicating it is ready to learn codes.
2. Position Remotes: Place your original remote very close to the universal remote, or have them face-to-face (about 2-3 cm apart).
3. Initiate Cloning: Hold down the button on your original remote that you wish to copy. The LED on the universal remote will start to flash quickly, indicating it is learning codes.
4. Store Code: While the universal remote's LED is flashing, press any button on the universal remote where you want to store the copied code. The LED will turn off once the code is successfully stored.

Additional Step for Garage Door Openers (Learning Button):

For some garage door openers, an additional step involving the opener's "LEARN" button is required after direct cloning:

5. Activate Learn Mode: On your garage door opener (the mechanical unit that opens the door), press the "LEARN" button. The LED on your garage door opener should turn ON.
6. Confirm Programming: Immediately press the same button you programmed on the universal remote. The lights on your garage door opener should either flash or go on/off, depending on the brand of the opener, confirming successful programming.
7. You can now use the universal remote to open your garage door.

Image: A visual guide illustrating the steps for cloning an existing remote to the XIHADA Universal Remote.

Programming Video Tutorial:

Operating Instructions

Once programmed, the XIHADA Universal Remote operates similarly to your original remote. Each of the four buttons can control a different device (garage door, gate, etc.).

• Opening/Closing: Press the programmed button corresponding to the desired garage door or gate.
• Range: The remote has a maximum operating range of approximately 50 feet. Optimal performance may vary based on environmental factors and the receiver's location.

Image: A hand holding the XIHADA Universal Remote, with a garage door opening in the background, illustrating typical operation.

Image: A close-up view of the XIHADA Universal Remote, highlighting its four distinct buttons labeled Key 1 through Key 4.

Product in Action Video:

Maintenance

Battery Replacement:

The XIHADA Universal Remote uses one CR2032 battery (included). When the remote's range decreases or it stops responding, it may be time to replace the battery.

1. Carefully open the remote casing.
2. Remove the old CR2032 battery.
3. Insert a new CR2032 battery, ensuring correct polarity.
4. Close the remote casing securely.

Image: A diagram illustrating the location and type of battery (CR2032) used in the XIHADA Universal Remote.

Troubleshooting

• Remote Not Programming:
  • Ensure your original remote is fully functional and has a strong battery.
  • Verify that your original remote's brand and model are listed as compatible (refer to the Compatibility section).
  • Make sure the universal remote's LED flashes quickly after clearing codes, indicating it's in learning mode.
  • Ensure the remotes are placed very close to each other (2-3 cm) during the cloning process.
  • For garage door openers, remember the additional step of pressing the "LEARN" button on the opener unit.
• Limited Range:
  • Replace the CR2032 battery in the universal remote.
  • Ensure there are no obstructions between the remote and the receiver.
• Accidental Button Presses: The remote features tactile buttons designed to prevent accidental activation. However, ensure it is stored in a way that minimizes pressure on the buttons.

Specifications

Image: A visual representation of the XIHADA Universal Remote with its dimensions labeled.

Warranty and Support

This XIHADA Universal Remote Cloner comes with a 1-Year Manufacturer Warranty. For any support inquiries, troubleshooting assistance, or warranty claims, please contact the manufacturer, Xiamen Xihada Information Technology Co., Ltd, through your purchase platform or their official support channels.