Introduction
This instruction manual provides essential information for the proper setup, operation, and maintenance of your Easytry123 replacement remote control. This remote is designed to be compatible with specific TCL AC Air Conditioner models as listed in the title. Please read this manual thoroughly before use to ensure optimal performance and to understand the remote's functionalities.
Important Note: This is a replacement remote control. While it is designed to function with the specified TCL AC models, it may not offer all the exact same functions or button layouts as your original remote. Refer to the images and descriptions provided to familiarize yourself with its features.
Setup: Battery Installation
The remote control requires two (2) AAA batteries for operation. Batteries are not included with the remote control.
- Locate the battery compartment on the back of the remote control.
- Slide the battery compartment cover downwards or press the latch and lift to open.
- Insert two AAA batteries, ensuring the positive (+) and negative (-) terminals align correctly with the markings inside the compartment.
- Replace the battery compartment cover by sliding it back into place until it clicks securely.
Image: Back view of the remote control with the battery cover removed, revealing the battery slots. This illustrates where to insert the two AAA batteries.
After installing the batteries, the remote control is ready for use. No programming is typically required for this replacement remote; it should function directly with compatible TCL AC units.
Operating Instructions
This remote control uses infrared (IR) technology. Ensure there is a clear line of sight between the remote control and the air conditioner's receiver when operating.
Image: Front view of the remote control, displaying its buttons and LCD screen. This image helps identify the location of each function button.
Button Functions:
- Power Button (Blue button with power symbol): Turns the air conditioner ON or OFF.
- Mode Button (Green button with fan/snowflake/water drop symbols): Cycles through operating modes such as Cool, Heat, Fan, Dry, Auto.
- Temperature Adjustment Buttons (Up/Down arrows): Increases or decreases the set temperature.
- Fan Speed Button (Button with fan symbol): Adjusts the fan speed (e.g., Low, Medium, High, Auto).
- Timer Button (Button with clock symbol): Sets the timer for automatic ON/OFF operations.
- Sleep Button (Button with star symbol): Activates or deactivates sleep mode, which adjusts temperature for comfortable sleep.
- Swing Button (Button with oscillating arrows): Controls the louver swing function.
- Display Screen: Shows current settings such as mode, temperature, fan speed, and timer status.
Point the remote control directly at the air conditioner's indoor unit when pressing buttons. The maximum effective range is typically around 8 meters (26 feet) without obstructions.
Maintenance
Battery Replacement:
Replace the batteries when the remote control's range decreases, or if the display becomes dim or unresponsive. Always replace both batteries at the same time with new AAA batteries. Do not mix old and new batteries, or different types of batteries.
Cleaning:
Wipe the remote control with a soft, dry cloth. Do not use liquid cleaners, abrasive cleaners, or chemical solvents, as these can damage the remote's surface or internal components.
Storage:
If the remote control will not be used for an extended period, remove the batteries to prevent leakage and potential damage to the device.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Remote control is not working. |
|
|
| Some functions do not work. |
|
|
| Display is dim or blank. | Batteries are low or dead. | Replace batteries with new AAA batteries. |
Specifications
- Brand: Easytry123
- Model Number: Easytry6949
- Compatible Devices: TCL AC Air Conditioners (TAC-09CHSC/K, TAC-12CHSC/K, TAC-18CHSC/K, TAC-24CHSC/K, TAC-09CHS/G, TAC-12CHS/G, TAC-15CHS/G, TAC-18CHS/G, TAC-24CHS/G)
- Connectivity Technology: Infrared (IR)
- Controller Type: Button Control
- Power Source: 2 x AAA Batteries (not included)
- Special Feature: Replacement remote control; functionality may vary compared to original equipment.
Warranty and Support
As a replacement product, specific warranty details may vary. Please refer to the purchase platform or contact the seller directly for information regarding warranty coverage and return policies.
For technical support or inquiries about product functionality, it is recommended to contact the seller (Easytry123) through the platform where the purchase was made. Provide your order details and a clear description of the issue for efficient assistance.