1. Introduction
This user manual provides comprehensive instructions for the setup, operation, maintenance, and troubleshooting of your Oscar 80 cm (32 Inches) Full HD Smart LED TV, model 32XLSM31. Please read this manual thoroughly before operating your television to ensure proper use and to maximize its performance and longevity.
The Oscar 32XLSM31 is a 32-inch Full HD (1920 x 1080p) Smart LED TV, featuring a 50Hz refresh rate, Android operating system, and integrated Wi-Fi connectivity. It is designed to provide a rich entertainment experience with access to various streaming services and versatile connectivity options.
2. What's Included
Upon unpacking, please verify that all components listed below are present and in good condition:
- 1 x Oscar 80 cm (32 Inches) Full HD Smart LED TV (Model: 32XLSM31)
- 1 x Table Top Stand (2 pieces)
- 1 x Remote Control
- 1 x User Manual (this document)
- 1 x Warranty Card
Figure 2.1: Front view of the Oscar 32XLSM31 Smart LED TV with pre-installed app icons visible.
3. Setup Guide
3.1 Attaching the Table Top Stand
- Carefully place the TV screen-down on a soft, flat surface to prevent scratches.
- Identify the two stand pieces and align them with the corresponding slots at the bottom of the TV.
- Secure each stand piece using the provided screws. Ensure they are tightened firmly but do not overtighten.
- Gently lift the TV and place it on a stable, level surface.
Figure 3.1: Side view of the TV with the table top stand attached.
3.2 Wall Mounting (Optional)
If you prefer to wall mount your TV, please use a VESA-compatible wall mount kit (not included). Refer to the wall mount kit's instructions for proper installation. The TV's mounting type is Wall Mount.
3.3 Connecting External Devices
The Oscar 32XLSM31 TV offers various ports for connecting external devices. Refer to the image below for port locations.
Figure 3.2: Rear view of the TV displaying connectivity ports.
- HDMI Ports (x2): Connect set-top boxes, Blu-ray players, gaming consoles, or other HDMI-enabled devices.
- USB Ports (x2): Connect USB drives for media playback or other USB devices.
- VGA Slot (x1): Connect a computer or laptop.
- AV Input Slot (x1): Connect older devices using composite video and stereo audio cables.
- AV Output Slot (x1): For audio/video output to external systems.
- RF Slot (x1): Connect an antenna for terrestrial broadcast reception.
Ensure all cables are securely connected to their respective ports.
4. Operating Your TV
4.1 Initial Power On and Setup Wizard
- Plug the power cord into a wall outlet.
- Press the Power button on the remote control or on the TV itself.
- The TV will guide you through an initial setup wizard. Follow the on-screen prompts to:
- Select your preferred language.
- Connect to a Wi-Fi network (if available).
- Scan for available channels (if using an antenna).
- Set time zone and other basic settings.
4.2 Remote Control Functions
The included remote control allows you to navigate the TV's features. Familiarize yourself with its buttons:
- Power: Turns the TV on/off.
- Source/Input: Switches between connected input sources (HDMI, AV, VGA, TV).
- Volume +/-: Adjusts the volume level.
- Channel +/-: Changes TV channels.
- Navigation (Arrow buttons, OK): Navigates menus and confirms selections.
- Back/Return: Returns to the previous screen or menu.
- Home: Accesses the Smart TV home screen.
- Menu: Opens the main settings menu.
- Netflix, YouTube, Hotstar: Dedicated buttons for quick access to these streaming services.
4.3 Smart TV Features
Your Oscar Smart LED TV runs on the Android operating system, providing access to a wide range of applications and features:
- App Store: Download and install additional applications from the integrated app store.
- Streaming Services: Enjoy pre-installed and downloadable apps like Netflix, Hotstar, and YouTube.
- Media Playback: Play videos, music, and view photos from USB devices.
- Wi-Fi Connectivity: Connect to your home network for internet access.
- Bluetooth Support: Connect compatible Bluetooth devices such as headphones or speakers.
5. Maintenance and Care
- Cleaning the Screen:
Gently wipe the screen with a soft, lint-free cloth. For stubborn marks, slightly dampen the cloth with water or a specialized screen cleaner. Do not spray liquid directly onto the screen.
- Cleaning the Cabinet:
Wipe the TV cabinet with a soft, dry cloth. Avoid using abrasive cleaners or solvents.
- Ventilation:
Ensure adequate ventilation around the TV. Do not block the ventilation openings on the back of the TV. Maintain a minimum distance of 10 cm (4 inches) from walls or other objects.
- Power Cord:
Regularly check the power cord for any damage. If damaged, contact qualified service personnel for replacement.
- Storage:
If storing the TV for an extended period, disconnect it from the power outlet and store it in a cool, dry place, preferably in its original packaging.
6. Troubleshooting
Before contacting customer support, please refer to the following common issues and their solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| No power | Power cord not connected; Power outlet not working; TV in standby mode. | Ensure power cord is securely plugged in. Test the outlet with another device. Press the Power button on the remote or TV. |
| No picture, but sound is present | Incorrect input source selected; Loose video cable connection. | Press the Source/Input button on the remote to select the correct input. Check video cable connections (HDMI, AV, VGA). |
| No sound, but picture is present | Volume is muted or too low; Incorrect audio output setting. | Press the Volume + button. Check if the TV is muted. Verify audio settings in the TV menu. |
| Remote control not working | Batteries are dead or incorrectly inserted; Obstruction between remote and TV. | Replace batteries with new ones, ensuring correct polarity. Remove any obstructions. Ensure you are within range and pointing at the TV's IR sensor. |
| Cannot connect to Wi-Fi | Incorrect Wi-Fi password; Router issues; TV too far from router. | Double-check the Wi-Fi password. Restart your router. Move the TV closer to the router or use a Wi-Fi extender. |
7. Technical Specifications
| Feature | Detail |
|---|---|
| Model Name | 32XLSM31 |
| Brand | Oscar |
| Display Size | 80 cm (32 Inches) |
| Display Technology | LED |
| Resolution | Full HD (1920 x 1080p) |
| Refresh Rate | 50 Hz |
| Operating System | Android |
| Internal Storage | 8 GB |
| RAM (Digital Storage Capacity) | 1 GB |
| Audio Output | 10 Watts |
| Speaker Configuration | 2.1 Speaker Surround Sound Channel |
| Connectivity | Wi-Fi, Bluetooth, 2x HDMI, 2x USB, 1x VGA, 1x AV Input, 1x AV Output, 1x RF |
| Supported Internet Services | Netflix, Hotstar, YouTube |
| Power Consumption (On-mode) | 55.00 Watts |
| Product Dimensions (LxWxH) | 80 x 51 x 14 cm |
| Item Weight | 6.4 kg |
| Model Year | 2018 |
8. Warranty and Support
Your Oscar 32XLSM31 Smart LED TV comes with a comprehensive warranty to ensure your peace of mind.
- Standard Manufacturer Warranty: 1 Year
- Additional Panel Warranty: 2 Years (from Oscar)
For any installation, wall mounting, demo requests, or technical support, please contact Oscar customer service. When contacting support, please provide the product's model name (32XLSM31) and the seller's details as mentioned on your invoice.
Please retain your purchase invoice and warranty card for future reference and to avail warranty services.
