Introduction
This manual provides instructions for the Accutime Disney Pixar Toy Story 4 Buzz Lightyear Kids Flashing LCD Watch, Model TYM4031. This digital watch is designed for children aged 4 and up, featuring a clear LCD display, flashing lights, and an adjustable strap. Please read this manual thoroughly to ensure proper use and care of the watch.
Figure 1: Buzz Lightyear Kids Flashing LCD Watch in packaging.
Product Features
- Exciting Flashing Dial: The LCD screen illuminates with a dynamic flashing effect, showcasing Buzz Lightyear.
- Space Adventure Strap: Features a printed design with planets, rockets, and stars.
- Easy-to-Read Digital Display: Provides a clear LCD time readout, aiding children in learning to tell time.
- Comfortable Adjustable Fit: Equipped with a durable plastic strap that accommodates wrists from 5.5" to 8".
Figure 2: Key features of the Buzz Lightyear watch.
Setup
Strap Adjustment
The watch features an adjustable plastic strap designed for a comfortable fit. To adjust, locate the buckle and the series of holes on the strap. Select the hole that provides a snug yet comfortable fit around the wrist. Ensure the watch is not too tight to prevent discomfort or too loose to avoid accidental removal.
Setting the Time
To set the time on your digital watch:
- Locate the buttons on the side of the watch. Typically, there is a 'MODE' button and a 'SET' or 'ADJUST' button.
- Press the 'MODE' button repeatedly until the time display begins to flash, indicating it is in setting mode.
- Use the 'SET' or 'ADJUST' button to change the flashing digits (hours, then minutes). Each press will advance the number. Hold the button to advance rapidly.
- Once the correct time is set, press the 'MODE' button again to exit the setting mode. The display will stop flashing, and the time will be set.
Figure 3: Front view of the watch, illustrating the digital display and strap.
Operating Instructions
Reading the Digital Display
The watch features a clear LCD display that shows the time in a digital format (e.g., 10:10). The numbers are large and easy for children to read.
Activating Flashing Lights
To activate the flashing lights feature, press the designated light button, usually located on the side of the watch. The LCD dial will light up with a colorful flashing effect. Press the button again to turn off the lights, or they may turn off automatically after a short period.
Maintenance
Cleaning
To clean the watch, gently wipe it with a soft, damp cloth. Avoid using harsh chemicals or abrasive materials, as these can damage the watch's finish or display. Do not submerge the watch in water.
Battery Replacement
The watch requires 1 Lithium Ion battery (included). When the display dims or the watch stops functioning, the battery may need replacement. Battery replacement should ideally be performed by an adult or a qualified technician to ensure proper sealing and function. Refer to the back of the watch for battery compartment details.
Figure 4: Back of the watch, showing battery information.
Troubleshooting
- Watch not displaying time: Check if the battery needs replacement. Ensure no buttons are stuck.
- Lights not flashing: Verify the battery level. Ensure the light button is pressed correctly.
- Incorrect time display: Follow the 'Setting the Time' instructions in the Setup section to reset the time.
Specifications
| Item Model Number | TYM4031 |
| Brand | Accutime |
| Manufacturer | Accutime Watch Corp. |
| Material | Plastic |
| Recommended Age | 6 - 6 years (Note: Product description states 4 and up, please verify with packaging) |
| Batteries | 1 Lithium Ion battery (included) |
| Package Dimensions | 3.11 x 3.07 x 3.03 inches |
| Item Weight | 0.8 ounces |
| ASIN | B07QVLCC34 |
Warranty and Support
For warranty information regarding this product, please refer to the documentation provided with your purchase or visit the manufacturer's official website. A PDF document for warranty information may be available.
For further assistance or support, please contact Accutime Watch Corp. customer service.
