ECONTROLLY EN2G27

ECONTROLLY EN2G27 Remote Control User Manual

Model: EN2G27

1. Introduction

This user manual provides instructions for the ECONTROLLY EN2G27 replacement remote control. This remote is designed to be compatible with various Hisense LCD LED TV models, offering a direct replacement without the need for complex programming.

Please read this manual carefully to ensure proper use and to maximize the lifespan of your remote control.

2. Setup

2.1 Battery Installation

The EN2G27 remote control requires two (2) AAA batteries for operation. Batteries are not included with the remote control.

Locate the battery compartment on the back of the remote control.
Press down on the tab and slide the battery cover downwards to open.
Insert two (2) AAA batteries, ensuring the positive (+) and negative (-) terminals align correctly with the markings inside the compartment.
Slide the battery cover back into place until it clicks securely.

Important Note:

Do not mix old and new batteries.
Do not mix alkaline, standard (carbon-zinc), or rechargeable (nickel-cadmium) batteries.
Remove batteries if the remote control will not be used for an extended period.

2.2 Initial Use

This remote control is designed to work immediately with compatible Hisense LCD LED TV models without any programming. Once batteries are installed, point the remote control towards your television and begin use.

Image: Front view of the ECONTROLLY EN2G27 remote control, showing all buttons and the model number at the bottom.

3. Operation

The EN2G27 remote control provides full functionality for compatible Hisense LCD LED TVs. Below is a general overview of the buttons and their functions.

Image: Angled view of the ECONTROLLY EN2G27 remote control, highlighting the ergonomic design and button layout.

3.1 Button Functions

Button	Function
Power (Red)	Turns the TV on or off.
Input	Selects the input source (HDMI, AV, etc.).
0-9 (Number Buttons)	Direct channel selection.
CC	Activates/deactivates Closed Captions.
Navigation (Up, Down, Left, Right, OK)	Navigates menus and confirms selections.
Back	Returns to the previous screen or menu.
Exit	Exits the current menu or application.
Home (House icon)	Accesses the TV's main home screen or smart hub.
Vol +/-	Adjusts the volume level.
CH +/-	Changes the television channel.
Mute (Speaker with X)	Mutes or unmutes the TV audio.
Live TV	Switches to live television broadcast.
Media Controls (Play/Pause, Stop, Rewind, Fast Forward)	Controls media playback (e.g., USB content, streaming apps).
SLEEP	Activates the sleep timer function.
NETFLIX	Direct access to the Netflix application.
dailymotion	Direct access to the Dailymotion application.
BROWSER	Opens the TV's web browser.
YouTube	Direct access to the YouTube application.

Note: Specific button functionality may vary slightly depending on your Hisense TV model and its firmware version.

4. Maintenance

4.1 Cleaning the Remote Control

To maintain the remote control's appearance and functionality, clean it regularly:

Use a soft, dry cloth to wipe the surface of the remote.
For stubborn dirt, slightly dampen the cloth with water or a mild, non-abrasive cleaner. Do not spray cleaner directly onto the remote.
Avoid using harsh chemicals, solvents, or abrasive cleaning pads, as these can damage the remote's finish or internal components.

4.2 Battery Replacement

Replace batteries when the remote control's response becomes sluggish or stops working. Follow the battery installation steps outlined in Section 2.1.

4.3 Storage

Store the remote control in a cool, dry place away from direct sunlight, extreme temperatures, and high humidity. If storing for an extended period, remove the batteries to prevent leakage.

5. Troubleshooting

If you experience issues with your EN2G27 remote control, please refer to the following common solutions:

Problem	Possible Cause / Solution
Remote is not working at all.	Batteries: Check if batteries are inserted correctly (+/-). Replace with fresh AAA batteries. Line of Sight: Ensure there are no obstructions between the remote and the TV's infrared sensor. Distance: Make sure you are within the effective range of the TV's IR receiver.
Some buttons are not responding.	Batteries: Low battery power can cause intermittent button response. Replace batteries. Dirt/Debris: Clean the remote control, especially around the unresponsive buttons, to ensure no dirt is preventing contact. TV Compatibility: Verify that the specific button function is supported by your Hisense TV model.
Remote works intermittently.	Batteries: Batteries may be low. Replace them. Interference: Strong light sources (like direct sunlight) or other electronic devices can sometimes interfere with IR signals. Try using the remote in a different environment.

6. Specifications

Feature	Detail
Model Number	EN2G27 (RCEC-EN2G27)
Brand	ECONTROLLY
Compatible Devices	Hisense LCD LED TVs (e.g., 65H7B, 65H10B, 50H6B, 50H7GB, 50H8C, 43H5C, 43H7C, 50H5C, 55H5C, 55H6B, 55H7B, 55H8C, 5H9B)
Connectivity Technology	Infrared (IR)
Power Source	2 x AAA Batteries (not included)
Product Dimensions	7 x 2 x 0.65 inches (approx.)
Item Weight	2 ounces (approx.)
Special Feature	Ergonomic design

7. Warranty and Support

Specific warranty information for the ECONTROLLY EN2G27 remote control is not provided in this manual. For details regarding warranty coverage, returns, or technical support, please refer to the product listing where you purchased the item or contact the seller directly.

It is recommended to retain your proof of purchase for any warranty claims.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.