RGBZONE 24-Key RF Smart WiFi LED Controller Instruction Manual

1. Introduction

This manual provides detailed instructions for the installation, operation, and maintenance of your RGBZONE 24-Key RF Smart WiFi LED Controller. This controller is designed for use with 5V/12V/24V RGB LED strip lights (5050, 3528, 5630 types) and offers both RF remote control and Wi-Fi smart control capabilities, including compatibility with Amazon Alexa and Google Home.

2. Package Contents

Verify that all items listed below are included in your package:

• 1 x RF LED Controller
• 1 x RF Remote Control (Note: 1 CR2 battery required, not included)
• 1 x User Manual
• 1 x 4-Pin Connector

Image: Contents of the RGBZONE LED Controller package, showing the controller unit, RF remote, and user manual.

3. Product Overview

Image: The RGBZONE RF Smart WiFi LED Controller and its accompanying 24-key RF remote control.

3.1 Controller Unit

The controller unit is the central component for managing your LED strip lights. It connects to your power adapter and LED strip, and communicates with the RF remote and your Wi-Fi network for smart control.

3.2 RF Remote Control

The 24-key RF remote control allows for direct operation of your LED strip lights without needing line-of-sight. It provides basic functions such as power on/off, color selection, brightness adjustment, and mode changes.

Image: Detailed dimensions of the RGBZONE LED Controller and the 24-key RF remote control.

4. Setup and Installation

4.1 Hardware Connection

1. Connect to Power Adapter: Plug your DC 5V/12V/24V power adapter into the input jack of the LED controller. Ensure the power adapter is suitable for your LED strip's voltage and wattage requirements.
2. Connect to LED Strip: Connect the 4-pin connector from your RGB LED strip to the output port of the controller. Ensure the pins are aligned correctly (usually marked with arrows or +/R/G/B).

Image: Step-by-step visual guide for connecting the LED controller to a power adapter and an LED strip.

4.2 Remote Control Pairing

The remote control may need to be paired with the controller or have its code cleared for proper operation.

• Code Matching (Pairing): Within 5 seconds after the controller is powered on, press and hold the "ON" key on the RF remote. The LED strip lights will flash slowly to indicate successful pairing.
• Code Clearing (Unpairing): Within 5 seconds after the controller is powered on, press and hold the "OFF" key on the RF remote. The LED strip lights will flash quickly to indicate successful code clearing.

4.3 Wi-Fi App Setup

To enable smart control features, download the companion app and connect the controller to your Wi-Fi network. Note: This Wi-Fi controller is not compatible with 5.0GHz networks; use a 2.4GHz Wi-Fi network.

1. Download the App: Scan the QR code on the controller unit or visit http://app.magichue.net/download/mgchomepro/AppDown.aspx to download the "Magic Home Pro" app.
2. Register/Login: Open the app and follow the on-screen instructions to register an account or log in.
3. Add Device: Power on the LED controller. In the app, select "Add Device" or the "+" icon.
4. Connect to Wi-Fi: Follow the app's instructions to connect the controller to your 2.4GHz Wi-Fi network. This typically involves selecting your Wi-Fi network and entering the password.

Image: Visual representation of connecting the LED controller to a home Wi-Fi network via the mobile application.

5. Operating Instructions

5.1 Using the RF Remote Control

The 24-key RF remote provides quick access to various lighting functions:

Image: Detailed diagram of the 24-key RF remote control, indicating button functions for power, brightness, color selection, and dynamic modes.

• ON/OFF: Power the LED strip on or off.
• R/G/B/W: Directly select Red, Green, Blue, or White light.
• Color Buttons: Select from 16 preset colors.
• Brightness +/-: Adjust the brightness level of static colors.
• FLASH: Activates a rapid color changing mode.
• STROBE: Activates a slower, pulsating color changing mode.
• FADE: Activates a smooth transition between colors.
• SMOOTH: Activates a very gradual and smooth color transition.

5.2 Using the Mobile App (Magic Home Pro)

The "Magic Home Pro" app unlocks advanced features and greater control over your LED strip lights.

• Color Selection: Choose from a full spectrum of colors using a color wheel.
• Brightness & Saturation: Fine-tune light intensity and color vibrancy.
• Dynamic Modes: Access various pre-programmed dynamic lighting effects.
• Music Sync: Synchronize your LED lights with music playing on your smartphone.


Image: Illustration of the music synchronization feature, where LED lights change in rhythm with music played from a smartphone.

• Group Control: Control multiple Wi-Fi LED controllers simultaneously by creating groups within the app.
• Time Setting: Schedule lights to turn on/off at specific times, or set routines for waking up or going to bed.
• Scene Creation: Create and save custom lighting scenes for different moods or occasions.

Image: A visual summary of the controller's smart features: voice control, music synchronization, time scheduling, and wireless app control.

5.3 Voice Control (Alexa & Google Home)

Integrate your LED controller with Amazon Alexa or Google Home for convenient voice command operation.

1. Link Account: In your Alexa or Google Home app, search for the "Magic Home Pro" skill/service and link your account.
2. Discover Devices: Once linked, ask your voice assistant to "Discover devices."
3. Voice Commands: You can now use voice commands to control your lights. Examples:
   • "Alexa, turn on the living room light."
   • "Hey Google, set the bedroom light to blue."
   • "Alexa, dim the kitchen lights to 50 percent."

Image: An example of voice control integration, showing a Google Home device controlling LED lights via the RGBZONE controller.

6. Maintenance

The RGBZONE LED Controller requires minimal maintenance. Keep the unit clean and dry. Avoid exposing it to extreme temperatures or moisture. Do not attempt to open or repair the controller, as this will void any potential warranty.

7. Troubleshooting

8. Specifications

9. Warranty and Support

For warranty information or technical support, please refer to the product packaging or contact RGBZONE customer service through their official channels. Keep your purchase receipt for warranty claims.