1. Introduction
This manual provides detailed instructions for the installation, operation, and maintenance of your YLXD 7-inch Video Intercom System. This system is designed to enhance home security and convenience with features such as video intercom, access control via RFID cards or keypad, and remote unlocking capabilities.
2. Package Contents
Please verify that all items listed below are included in your package:
- 1 x Outdoor Unit with Rain Cover and Access Control System
- 1 x Indoor Monitor (7-inch)
- 1 x Power Adapter
- 1 x 6-pin Cable (5m)
- 1 x 2-pin Cable
- 1 x 3-pin Cable
- 1 x Mounting Plate
- 1 x Bag of Screws
- 5 x RFID Cards (125KHz)
- 1 x Remote Control
3. Setup
3.1 Outdoor Unit Installation
The outdoor unit should be installed in a location that provides a clear view of visitors and is protected from direct heavy rain. Use the provided mounting plate and screws to secure the unit.
Figure 3.1: Outdoor unit showing various angles and mounting options.
1. Separate the outdoor unit from its mounting bracket.
Video 3.1: Installation guide for the outdoor unit (KW07 model shown).
2. Mark the drilling points on the wall using the mounting bracket as a template.
3. Drill holes and insert the plastic anchors.
4. Secure the mounting bracket to the wall with screws.
5. Connect the necessary wiring (power, monitor, lock) to the outdoor unit. Ensure correct polarity for power connections.
Figure 3.2: Labeled components of the outdoor unit.
6. Attach the outdoor unit to the secured mounting bracket.
3.2 Indoor Monitor Installation
The indoor monitor should be mounted at a convenient height for viewing and operation.
Video 3.2: Installation guide for the indoor monitor (KW02_IP7 model shown).
1. Secure the indoor monitor's mounting plate to the wall using screws and anchors.
Figure 3.3: Labeled components and dimensions of the indoor monitor.
2. Connect the power adapter to the monitor. Connect the 6-pin cable from the outdoor unit to the corresponding port on the back of the indoor monitor.
Figure 3.4: Rear view of the indoor monitor with connection points.
3. Carefully attach the indoor monitor to its mounting plate.
3.3 Wiring Diagram
Ensure all connections are secure and correctly wired before powering on the system. Incorrect wiring can damage the devices.
The system supports connection to an electric strike lock. Use the provided 2-pin or 3-pin cables for connecting the lock, depending on your lock type (NO/NC).
Figure 3.5: Overview of the YLXD Video Intercom System components.
4. Operating Instructions
4.1 Basic Operation
- Answering a Call: When a visitor presses the call button on the outdoor unit, the indoor monitor will ring. Touch the 'Answer' button on the monitor to establish communication.
- Monitoring: Press the 'Monitor' button on the indoor unit to view the outdoor camera feed at any time.
- Two-Way Communication: Speak to your visitor through the indoor monitor.
- Unlocking the Door: During a call or while monitoring, press the 'Unlock' button on the indoor monitor to open the connected electric lock.
4.2 Access Control Methods
The system offers multiple ways to unlock the door:
- RFID Cards: Present a pre-programmed 125KHz RFID card to the outdoor unit's card reader to unlock the door.
- Keypad Access: Enter a pre-set access code on the outdoor unit's keypad.
- Remote Control: Use the provided remote control to unlock the door from a distance (up to 6-20 meters).
Figure 4.1: Various methods for unlocking the door.
4.3 Night Vision
The outdoor camera is equipped with clear IR night vision, allowing for surveillance and image capture even in low-light environments.
5. Maintenance
To ensure optimal performance and longevity of your YLXD Video Intercom System, follow these maintenance guidelines:
- Cleaning: Use a soft, dry cloth to clean the outdoor unit and indoor monitor. Avoid abrasive cleaners or solvents that could damage the surfaces.
- Environmental Protection: Ensure the outdoor unit's rain cover is properly installed to protect it from harsh weather conditions.
- Cable Inspection: Periodically check all cables for any signs of wear or damage. Replace damaged cables immediately.
- Software Updates: Check the manufacturer's website for any available firmware updates to ensure your system has the latest features and security enhancements.
6. Troubleshooting
If you encounter any issues with your YLXD Video Intercom System, please refer to the following common problems and solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| No image on indoor monitor | Loose cable connection, power issue, faulty unit. | Check all wiring connections. Ensure the power adapter is plugged in and receiving power. Contact support if the issue persists. |
| No sound during communication | Volume too low, faulty microphone/speaker, wiring issue. | Adjust the volume settings on the indoor monitor. Check audio wiring. |
| Door lock not opening | Incorrect wiring to the lock, lock malfunction, incorrect RFID/code. | Verify lock wiring and power supply to the lock. Ensure correct RFID card or keypad code is used. Test the lock independently. |
| RFID card/keypad not working | Card not programmed, incorrect code, reader malfunction. | Ensure RFID cards are properly programmed. Verify the keypad code. |
7. Specifications
- Brand: YLXD
- Model: B07QQ58RDC
- Screen Size: 7-inch TFT LCD
- Connectivity Technology: Wired
- Special Feature: Night Vision
- Recommended Uses: Surveillance
- Material: Metal
- Power: 3 Watts
- Video Recording Resolution: 720p
- Controller Type: Push Button
- Mounting Type: Wall Mount
- Compatible Devices: Smartphone (via app, if applicable, though not explicitly stated for this model's app connectivity)
8. Warranty and Support
For warranty information or technical support, please refer to the documentation provided with your purchase or contact the retailer directly. Keep your proof of purchase for any warranty claims.