K&F Concept Nano-X Series 82mm Variable ND Filter
Contents
K&F Concept 82mm Variable ND Lens Filter ND8-ND128 (3-7 Stop)
User Manual
1. Introduction
This manual provides detailed instructions for the proper use and maintenance of your K&F Concept 82mm Variable ND Lens Filter (Nano-X Series). This filter is designed to reduce the amount of light entering your camera lens, allowing for greater control over exposure settings in bright conditions.
Key features include:
- Imported AGC Glass: Ensures high optical clarity and color neutrality.
- Variable Light Reduction: Adjustable from ND8 to ND128 (3 to 7 stops).
- Self-Lock Frame: Engineered to prevent the common 'X' cross pattern, especially at wider angles.
- NANOTEC Multi-Coatings: 28 layers provide waterproof, scratch-resistant, and anti-glare properties.
- Ultra-Slim Frame: 7.4mm design helps avoid vignetting on wide-angle lenses.

2. Setup and Installation
Before installing the filter, ensure your camera lens has an 82mm filter thread size. This is typically indicated by a "ø" (diameter) symbol followed by the number on the lens barrel or lens cap.

To install the filter:
- Carefully align the filter's threads with the threads on the front of your camera lens.
- Gently rotate the filter clockwise until it is securely attached. Do not overtighten.
Important Note: The front frame of this 82mm ND filter is designed to be one size larger (86mm) to accommodate its variable mechanism. This means that if you wish to attach a lens cap or hood to the front of the filter, it should be an 86mm size, not 82mm.

3. Operating the Variable ND Filter
The K&F Concept Variable ND filter allows you to adjust the light reduction from 3 stops (ND8) to 7 stops (ND128) by rotating the outer ring. This enables you to use slower shutter speeds or wider apertures in bright lighting conditions without overexposing your images or video.

Preventing Overexposure: This filter is particularly useful for video recording or photography in bright environments, allowing you to maintain desired aperture and shutter speed settings.

No 'X' Cross Pattern: K&F Concept's advanced design minimizes the common 'X' cross pattern that can appear on variable ND filters, especially at higher density settings or wider focal lengths. This ensures clean, uniform light reduction across the frame.

Applications:
- Landscape Photography: Achieve smooth, dynamic images by using slow shutter speeds to blur motion in water or clouds.
- Light Trails in Nightscapes: Capture the movement of light from vehicles or other sources during night photography.
- Fireworks Photography: Suppress overexposure to capture the full beauty and detail of fireworks displays.



4. Maintenance
To ensure the longevity and optimal performance of your K&F Concept Variable ND filter, follow these maintenance guidelines:
- Cleaning: The filter features waterproof and anti-scratch nanometer coatings, making it durable and easy to clean. Use a clean, soft microfiber cloth specifically designed for optical surfaces. For stubborn smudges, a small amount of lens cleaning solution can be applied to the cloth (not directly to the filter).
- Storage: When not in use, store the filter in its protective case to prevent dust accumulation and accidental damage.
- Handling: Always handle the filter by its edges to avoid leaving fingerprints on the glass surface.

5. Troubleshooting
While the K&F Concept Variable ND filter is designed for optimal performance, here are some common issues and their solutions:
- Vignetting (Dark Corners): Although the ultra-slim frame is designed to minimize vignetting, it can still occur, especially with extremely wide-angle lenses (e.g., below 28mm focal length) or when stacking multiple filters. Try adjusting your focal length or removing other filters if present.
- Uneven Density / 'X' Pattern: While our filter is designed to prevent this, if you observe an 'X' pattern or uneven density, it typically occurs when the filter is rotated beyond its intended maximum density range. Rotate the filter back slightly until the pattern disappears.
- Difficulty Attaching/Removing: Ensure the filter threads are clean and free of debris. Do not force the filter. The CNC-non-slip design should aid in easy installation and removal.
6. Specifications
| Feature | Detail |
|---|---|
| Model | Nano-X Series Variable ND Filter |
| Filter Thread Size | 82 Millimeters |
| Light Reduction Range | ND8-ND128 (3-7 Stops) |
| Material | Imported AGC Optical Glass |
| Coatings | 28-Layer Multi-Coating (NANOTEC) |
| Frame Thickness | 7.4mm (Ultra-Slim) |
| Water Resistance Level | Waterproof |
| Item Weight | 2.82 ounces |
| Product Dimensions | 4.65 x 4.65 x 1.06 inches (Packaging) / 3.23"L x 3.23"W (Filter) |
7. Warranty and Support
K&F Concept products are manufactured to high-quality standards. For any product-related inquiries, technical support, or warranty claims, please contact K&F Concept customer service through their official website or the retailer where the product was purchased.
Visit the official K&F Concept Store for more information and product registration: K&F Concept Amazon Store
Ask a question about this manual
Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.