Introduction
Thank you for choosing the LUVODI LED Bathroom Mirror. This smart mirror is designed to enhance your bathroom experience with its advanced lighting, anti-fog, and touch control features. Please read this manual carefully before installation and use to ensure proper operation and safety.
Product Features
- Dual LED Lighting: Features both background and front lighting for optimal illumination.
- Adjustable Light Color: Three light modes available: warm white (3000K), daylight (4500K), and white (6000K).
- Dimmable Brightness: Long press the touch switch to adjust brightness.
- Anti-Fog Function: Integrated demister pad (40x40 cm) prevents fogging, heating the surface to 40°C in 3-4 minutes.
- Smart Touch Control: Three independent touch switches for ON/OFF, light color, and anti-fog.
- Memory Function: Remembers the last light color and brightness setting.
- High-Quality Construction: Made from 5mm reinforced glass with explosion-proof film, silver-plated reflection layer, and aluminum frame.
- IP65 Waterproof Light Strip: Ensures safety and durability in humid environments.
Image: The LUVODI LED Bathroom Mirror showcasing its illuminated design.
Image: A visual comparison highlighting the dual LED light strips (front-lit + backlit) of the LUVODI mirror compared to mirrors with only one type of lighting.
Image: Detail of the smart touch sensor, illustrating brightness adjustment via long press and one-click color temperature changes (3000K, 4500K, 6000K).
Image: A woman applying cream in front of the mirror, demonstrating the effective anti-fog function with the 40x40 cm demister pad area highlighted.
Image: Close-up of the IP65 waterproof light strip, emphasizing its safety features like moisture-proof, durable, high color rendering, and no flash frequency.
Image: An exploded view diagram showing the 10 layers of the mirror's construction, including floating glass, reflective silver plating, protective layers, dual LED lamp strips, and aluminum-plastic composite panel.
Safety Instructions
Please observe the following safety precautions:
- Ensure the power supply is disconnected before installation or maintenance.
- Installation should be performed by a qualified electrician to prevent electric shock or injury.
- Do not expose the mirror to excessive moisture or direct water spray beyond its IP65 rating.
- Avoid using abrasive cleaners or sharp objects on the mirror surface.
- Keep out of reach of children.
- This product contains a light source of energy efficiency class [F].
Setup and Installation
Package Contents:
- LUVODI LED Bathroom Mirror
- Mounting Screws
- Instruction Manual
Choosing the Right Location:
Consider the size of your washbasin. The mirror should not exceed the length of the washbasin and should be at least 80% of its length for optimal aesthetic appeal. Consult a professional technician to confirm proper mounting height and avoid incorrect placement.
Image: Diagram illustrating precautions for mirror placement, advising that the mirror should not exceed the washbasin length and be at least 80% of it, and to consult a professional for mounting height.
Mounting Steps:
- Preparation: Ensure the wall is suitable for mounting and can support the mirror's weight (approx. 11.45 kg).
- Marking: Use a pencil to mark the drilling points on the wall according to the mirror's mounting holes.
- Drilling: Drill holes at the marked points and insert wall plugs (if necessary).
- Mounting: Secure the mounting screws into the wall. Hang the mirror onto the screws. The mirror can be hung vertically or horizontally.
- Wiring: Connect the mirror's power cable to your household electrical wiring. This mirror is designed to be directly connected to a wall switch for ON/OFF control. Ensure all connections are secure and insulated.
Image: Illustration of the easy installation process, showing the mirror being mounted on a wall with screws and the power cable being cut and connected to a wall switch.
Image: Technical drawing showing the dimensions (80x80x5 cm) and the wire outlet groove of the LUVODI mirror, with an inset showing a hand plugging in the wire.
Operating Instructions
The LUVODI LED Bathroom Mirror features intuitive touch controls located on the mirror surface.
- Power ON/OFF: Touch the power icon to turn the mirror lights on or off.
- Brightness Adjustment: Long press the power icon to adjust the brightness level. The mirror will remember your last brightness setting.
- Light Color Change: Touch the light color icon to cycle through the three available light modes: warm white (3000K), daylight (4500K), and white (6000K). The mirror will remember your last color setting.
- Anti-Fog Function: Touch the anti-fog icon to activate the demister. It is recommended to turn on the anti-fog function 3-4 minutes before showering for optimal results.
Image: A woman's face reflected in a mirror with water droplets, illustrating the smart touch sensing function with icons for ON/OFF, Light Color, and Anti-fog. Text indicates 0.1s ultra-fast response and touchable with wet hands.
Image: Two mirrors in a bathroom setting, highlighting the memory function that remembers the last color temperature and brightness, and the 3rd generation resin mirror with CRI 95-97% for true color rendering.
Maintenance
- Cleaning: Use a soft, damp cloth and a mild glass cleaner to clean the mirror surface. Do not spray cleaner directly onto the mirror.
- Avoid Abrasives: Do not use abrasive cleaners, scouring pads, or harsh chemicals, as these can damage the mirror's finish or electronic components.
- Electrical Safety: Ensure the mirror is disconnected from power before any deep cleaning or maintenance.
- Regular Inspection: Periodically check the wiring and mounting for any signs of wear or looseness.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Mirror lights do not turn on. | No power supply; loose wiring; faulty touch switch. | Check power connection; ensure wall switch is ON; inspect wiring (consult electrician if unsure); contact customer service. |
| Anti-fog function not working. | Anti-fog function not activated; demister pad malfunction. | Ensure anti-fog touch switch is pressed; allow 3-4 minutes for heating; contact customer service. |
| Light brightness or color cannot be adjusted. | Incorrect operation; touch switch malfunction. | Refer to "Operating Instructions" for correct touch gestures (long press for brightness, short press for color); contact customer service. |
| Mirror fogs up despite anti-fog being on. | Insufficient heating time; demister pad area too small for entire mirror. | Activate anti-fog 3-4 minutes before use; note that the demister covers a 40x40 cm area, not the entire mirror. |
Specifications
| Feature | Detail |
|---|---|
| Brand | LUVODI |
| Model Number | KC-W05-UK5-FBA |
| Dimensions | 80 x 80 x 5 cm |
| Weight | 11.45 Kilograms |
| Material | Glass, Aluminum |
| Lighting | Background and Front LED Lighting |
| Color Temperature | 3000K (Warm White), 4500K (Daylight), 6000K (White) |
| Anti-Fog Area | 40 x 40 cm |
| Waterproof Rating | IP65 (Light Strip) |
| Energy Efficiency Class | F |
Warranty and Support
LUVODI offers a 3-year quality guarantee for this LED bathroom mirror. Defective components will be replaced free of charge. For any questions, issues, or warranty claims, please contact LUVODI customer service. Our products are exported worldwide, ensuring comprehensive and professional support.
For further assistance, please visit the LUVODI Store on Amazon.
