Lunix LX3
Contents
Lunix LX3 Cordless Hand Massager Instruction Manual
Model: LX3
Introduction
The Lunix LX3 Cordless Hand Massager is designed to provide restorative compression, gentle heat, and optional vibration to relax tired and overworked hands. This device utilizes rhythmic air compression to target pressure points, offering relief for various hand conditions. It is ideal for everyday comfort and relaxation as part of a self-care routine.
This manual provides essential information for the safe and effective use of your Lunix LX3 Hand Massager. Please read it thoroughly before operation.
Safety Information
- Charge the hand massager fully before first use.
- Use the included USB cable and a 5V/1A power adapter for charging. The device supports up to a 5V/2A plug for faster charging.
- Connect to any USB-compatible power source (e.g., laptop, wall outlet) that meets the required specifications.
- The battery indicator will blink green during charging and display four solid green lights when fully charged.
- For safety reasons, the hand massager cannot be used while charging.
- The LX3 includes an auto shut-off feature for safety. If the device turns off sooner than expected, it may have completed a program or activated auto shut-off.
- Always ensure the power button is pressed and held to turn the device on.
- This device is not designed for deep, high-intensity heat therapy, but rather for gentle daily warmth and comfort.
What's in the Box
Your Lunix LX3 Cordless Hand Massager package includes the following items:






For the most up-to-date user manual, please visit: Lunix User Manual Online
Setup
Charging the Device
Before first use, fully charge your Lunix LX3 Hand Massager. Use the provided USB cable and 5V/1A wall plug. The device can also support a 5V/2A plug for faster charging. You can connect it to any USB-compatible power source, such as a laptop or power bank, ensuring it meets the specified voltage and amperage.

The Lunix LX3 Hand Massager can be charged via a laptop, wall plug, or power bank. The battery indicator will blink green while charging and show four solid green lights when fully charged.
Important: The massager cannot be used while charging. The plug must not exceed 5V, otherwise the unit will not charge.
Operating Instructions
Power On/Off
To turn the device on, press and hold the power button located on the control panel. The display will illuminate. To turn off, press and hold the power button again.

The control panel features a central power button and touch controls for various settings.
Hand Placement
Place your hand comfortably into the massager. The soft inner cushion is designed to rest on a table or flat surface, allowing you to easily slide your hand inside. The open-ended design accommodates most hand sizes, including the wrist area.

Insert your hand into the massager, ensuring comfortable placement for optimal massage.
Adjusting Settings (Programs, Intensity, Heat, Vibration)
The device features a smart and intuitive touchscreen display for easy operation:
- Programs (Modes): Select from 6 compression programs (P1-P6) to target different areas of the hand, including fingers, palm, and wrist.
- Intensity Levels: Choose from 6 intensity levels (I1-I6) for the air compression. Start with the lowest setting and gradually increase until you find your preferred comfort level.
- Heat Function: Activate the optional heat function. The LX3 warms gradually to a mild 107°F (41.6°C). For a cozier feel, you can wear light cotton gloves or use the included hand warmer.
- Vibration Function: Turn on the optional vibration feature for added relaxation.
- Timer Settings: The device operates for 15 minutes per session by default. You can adjust the timer settings as needed.

The touchscreen display allows selection of programs, intensity, heat, and vibration settings.
Auto Shut-Off
For your safety, the LX3 includes an automatic shut-off feature. If the device turns off before your desired session duration, it may have completed a program cycle or activated the auto shut-off. Simply restart if needed.
Indications for Use
The Lunix LX3 Hand Massager is designed to provide relief and relaxation for various hand conditions, including:
- Sore Fingers
- Arthritis
- Finger Numbness
- Joint Soreness
- Carpal Tunnel
- General Hand Pain
- Cold Hands

The LX3 targets various areas of the hand and wrist to alleviate discomfort.
Maintenance
Cleaning
To clean the device, ensure it is turned off and unplugged. Wipe the exterior with a soft, damp cloth. Do not use abrasive cleaners or immerse the device in water. The inner lining can be gently wiped with a clean, damp cloth. Allow to air dry completely before storage or next use.
Storage
Store the hand massager in a cool, dry place away from direct sunlight and extreme temperatures. Use the provided travel bag to protect the device from dust and scratches when not in use or during travel.
Troubleshooting
- Device does not power on or charge:
- Check the USB port and cable connection.
- Try another USB adapter (ensure it's 5V 1A/2A).
- Make sure the power button is pressed and held for a few seconds.
- Heat feels subtle: The LX3 warms gradually to a mild 107°F. Heat sensation may vary with skin sensitivity and compression level. For a cozier feel, wear light cotton gloves and allow a few minutes for warmth to build.
- Device turns off unexpectedly: This is likely due to the built-in auto shut-off feature, which activates after a program completes or for safety reasons. Simply restart the device if you wish to continue.
- Hand has temporary indentations after use: This is normal due to the air compression and the internal texture. These indentations typically disappear within 5-10 minutes.
If you continue to experience issues, please contact Lunix USA customer support for assistance.
Specifications
| Product Dimensions | 11.8 x 6.3 x 3.9 inches |
| Item Weight | 2.2 Pounds (1000 Grams) |
| Model Number | LX3-BLACK, NS-518 |
| Power Source | USB Rechargeable (1 Lithium Ion battery included) |
| Material | ABS Plastic |
| Manufacturer | Lunix |
Warranty & Support
Lunix is a family-owned company based in California, committed to quality and customer care. All products are tested by therapist experts.
For any questions or support regarding your Lunix LX3 Cordless Hand Massager, please contact our USA-based support team.
Contact Number: (307) 461-9622
You may also refer to the official Lunix store on Amazon for additional information and support: Lunix Store
Official Product Videos
Video Description: An overview of the LX3 electric hand massager by Lunix, demonstrating its features and benefits. This video is provided by the seller, LUNIX USA.
Ask a question about this manual
Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.