AULCMEET BN59-01175N Remote Control User Manual

1. Product Overview

This manual provides instructions for the AULCMEET BN59-01175N replacement remote control. This remote is designed to be compatible with a wide range of Samsung Smart TV models, offering a direct replacement without the need for complex programming.

The remote control features standard buttons for power, volume, channel, navigation, and smart hub access, ensuring full functionality for your compatible Samsung television.

Image 1: Front view of the AULCMEET BN59-01175N Remote Control, showing all buttons including power, source, number pad, volume, channel, menu, smart hub, and navigation keys.

2. Setup

2.1 Installing Batteries

The BN59-01175N remote control requires two AAA alkaline batteries (not included) for operation. Follow these steps to install them:

1. Step 1: Locate the battery compartment cover on the back of the remote control.
2. Step 2: Gently slide or press the cover to open the battery compartment.
3. Step 3: Insert two new AAA alkaline batteries, ensuring the positive (+) and negative (-) terminals match the diagrams inside the compartment.
4. Step 4: Close the battery compartment cover by sliding or pressing it back into place until it clicks securely.

Once batteries are installed, the remote is ready for use. No programming is required.

Image 2: A user holding a remote control while watching a Samsung TV, illustrating typical usage.

3. Operating Instructions

3.1 Basic Operation

To operate your Samsung TV with the BN59-01175N remote control, ensure there are no obstructions between the remote and the TV's infrared (IR) sensor. Point the remote directly towards the TV.

• Power On/Off: Press the POWER button (red button at the top left) to turn the TV on or off.
• Source Selection: Use the SOURCE button to cycle through input sources (HDMI, AV, etc.).
• Volume Control: Use the VOL +/- buttons to adjust the volume. Press MUTE to silence the audio.
• Channel Navigation: Use the CH +/- buttons to change channels.
• Navigation Pad: The central directional pad (up, down, left, right) and ENTER button are used to navigate menus and select options.
• Smart Hub: Press the SMART HUB button to access your Samsung Smart TV's smart features and applications.
• Menu: Press the MENU button to open the TV's main settings menu.
• Return/Exit: Use the RETURN or EXIT buttons to go back to the previous screen or exit a menu.

3.2 Compatible Samsung TV Models

This remote control is compatible with the following Samsung TV models:

• UE48H6500, UE40H6650, UE48H6640, UE48H6650, UE55H6640, UE55H6650
• UE40H6670, UE40H6700, UE48H6670, UE48H6700, UE55H6670, UE55H6700
• UE55H6500, UE40H6640, UE32H6400, UE40H6400, UE32H6470, UE40H6470
• UE48H6400, UE48H6470, UE50H6400, UE50H6470, UE55H6400, UE55H6470
• UE65H6400, UE65H6470, UE75H6400, UE75H6470

4. Maintenance

4.1 Cleaning the Remote Control

To maintain the remote control's appearance and functionality, clean it regularly:

• Use a soft, dry cloth to wipe the surface of the remote.
• For stubborn dirt, slightly dampen the cloth with water or a mild, non-abrasive cleaner. Avoid excessive moisture.
• Do not use harsh chemicals, solvents, or abrasive cleaning pads, as these can damage the remote's finish or internal components.

4.2 Battery Replacement

Replace batteries when the remote control's response becomes sluggish or stops working. Always replace both batteries at the same time with new AAA alkaline batteries. Do not mix old and new batteries or different types of batteries.

5. Troubleshooting

5.1 Remote Control Not Responding

• Check Batteries: Ensure batteries are inserted correctly with the correct polarity (+/-). Replace with fresh AAA alkaline batteries if necessary.
• Line of Sight: Make sure there are no objects blocking the path between the remote control and the TV's IR sensor.
• Distance: Ensure you are within a reasonable operating distance from the TV.
• TV Sensor: Verify that the TV's IR sensor is not obstructed or dirty.
• Compatibility: Double-check that your Samsung TV model is listed in the compatible models section (Section 3.2).

5.2 Specific Buttons Not Working

• If only certain buttons are unresponsive, try replacing the batteries first.
• Inspect the buttons for any physical damage or debris that might be preventing them from pressing correctly.

6. Specifications

7. Support

If you encounter any issues not covered in this manual or require further assistance with your AULCMEET BN59-01175N remote control, please contact the seller or manufacturer directly for support. Provide your product model number (BN59-01175N) and a detailed description of the issue to facilitate a quicker resolution.