1. Introduction
This manual provides instructions for the Tork Twin Mini Jumbo Toilet Paper Roll Dispenser, Model 5555200. This dispenser is designed for efficient and hygienic toilet paper dispensing in various environments. Please read this manual thoroughly before installation and use to ensure proper function and longevity of your product.
2. Product Features
- Dual Roll Capacity: Accommodates two high-capacity mini jumbo toilet paper rolls, reducing the frequency of refills.
- Hygienic Design: Closed dispenser system protects bath tissue from environmental exposure.
- Optimal Roll Brake: Prevents free spinning of rolls, minimizing waste and consumption.
- Refill Indicator Window: A transparent window allows for easy monitoring of paper levels.
- Secure Locking Mechanism: Features a key-operated lock to prevent unauthorized access and tampering.
- Durable Construction: Made from plastic for long-lasting use.
Image 2.1: Key features of the Tork Twin Mini Jumbo Toilet Paper Roll Dispenser, including the smart lock, twin roll capacity, and clear refill indicator window.
Image 2.2: Benefits of the Tork dispenser, such as high capacity, modern design, ease of cleaning, low maintenance, long-lasting rolls, and ADA compliance.
Image 2.3: The optimal roll brake mechanism helps minimize waste by preventing free spinning of the toilet paper rolls.
3. Setup & Installation
The Tork Twin Mini Jumbo Toilet Paper Roll Dispenser is designed for wall-mounted installation. Ensure the mounting surface is sturdy and capable of supporting the dispenser's weight when fully loaded.
3.1. Mounting the Dispenser
- Select an appropriate location on the wall, ensuring sufficient clearance for operation and refilling.
- Mark the drilling points on the wall using the dispenser as a template.
- Drill holes at the marked points. Use appropriate drill bits and wall anchors for your wall type (e.g., drywall, concrete).
- Secure the dispenser to the wall using screws. Ensure it is firmly attached and level.
3.2. Initial Loading of Toilet Paper Rolls
- Unlock the dispenser using the provided key. The top cover will open.
- Place two Tork Mini Jumbo toilet paper rolls onto the designated spindles inside the dispenser. Ensure the paper feeds from the bottom of the roll.
- Thread the leading edge of the first roll through the dispensing slot at the bottom of the dispenser.
- Close the top cover and lock it securely.
4. Operation
4.1. Dispensing Toilet Paper
To dispense toilet paper, simply pull the exposed paper downwards from the dispensing slot. The serrated edge will assist in tearing off the desired amount.
4.2. Switching Rolls
When the first roll is depleted, the dispenser is designed to automatically or manually switch to the second roll. If manual intervention is required, slide the mechanism to expose the second roll's paper, then thread it through the dispensing slot.
Video 4.1: This video demonstrates how to easily fill the Tork Twin Mini Jumbo Toilet Paper Roll Dispenser.
Video 4.2: This video provides a general overview of the Tork Toilet Paper Dispenser's operation and features.
5. Maintenance
5.1. Refilling Toilet Paper
Monitor the paper level through the transparent indicator window. When a roll is low or empty:
- Unlock the dispenser with the key and open the top cover.
- Remove any remaining core from the empty roll.
- Place a new Tork Mini Jumbo toilet paper roll onto the empty spindle.
- Ensure the paper is correctly threaded through the dispensing mechanism.
- Close and lock the dispenser cover.
5.2. Cleaning Instructions
The dispenser's smooth plastic surface is easy to clean. Use a soft cloth dampened with mild soap and water. Avoid abrasive cleaners or solvents, as these can damage the finish.
6. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Paper not dispensing or jamming | Incorrect roll placement, paper not threaded properly, foreign object. | Unlock and open the dispenser. Check that rolls are correctly seated and paper is threaded through the slot. Remove any obstructions. |
| Difficulty tearing paper | Paper pulled at an incorrect angle, worn serrated edge (unlikely for new product). | Ensure paper is pulled straight down against the serrated edge. If issue persists, inspect the tearing mechanism for damage. |
| Dispenser cover not closing/locking | Rolls not seated correctly, obstruction, lock mechanism misalignment. | Ensure rolls are fully seated and there are no obstructions preventing the cover from closing. Check the lock mechanism for any visible damage or misalignment. |
7. Specifications
| Attribute | Detail |
|---|---|
| Brand | Tork |
| Model Number | 5555200 |
| Material | Plastic |
| Finish Type | Smooth |
| Color | White |
| Installation Type | Wall Mounted |
| Product Dimensions | 17"L x 5.69"W |
| Style | Dispenser |
| Included Components | Dispenser |
| Shape | Rectangular |
| Number of Items | 1 |
| Pattern | Solid |
| Item Weight | 0.16 ounces |
| Manufacturer | Essity |
| Date First Available | April 12, 2019 |
8. Warranty & Support
This Tork dispenser may be eligible for a 5 Year Extended Warranty. Registration is required for eligibility. For more information and to register your product, please visit the official Tork website.
Image 8.1: Information regarding the 5-year extended warranty available for Tork products. Registration is required.
For further assistance, technical support, or to inquire about compatible Tork refills, please refer to the contact information provided on the official Tork website or your product packaging.