1. Introduction
This manual provides essential instructions for the safe installation, operation, and maintenance of your BSOD LED Panel Light 18W. Please read this manual thoroughly before installation and retain it for future reference.
Safety Information
- Always disconnect power at the circuit breaker before installation or servicing.
- Installation should be performed by a qualified electrician or in accordance with local electrical codes.
- Do not attempt to modify the light fixture or its components.
- Ensure the voltage supply matches the specifications of the light fixture (AC 85-265V).
- This product is designed for indoor use only.
2. What's in the Box
Carefully unpack the contents and ensure all items are present:
- 1 x BSOD LED Panel Light (18W)
- 1 x LED Driver
- 2 x Mounting Springs
Image: The BSOD LED Panel Light 18W, showing the main light panel, its external LED driver, and the connecting wires.
3. Specifications
| Feature | Specification |
|---|---|
| Brand | BSOD |
| Model | BSOD-18W |
| Wattage | 18W |
| Light Source | SMD2835 LED (90pcs) |
| Lumen Output | 1440-1620LM |
| Color Temperature | Warm White (2800-3200K) |
| Voltage | AC 85-265V (Universal) |
| Lifespan | >20,000 hours |
| Dimmable | No |
| Material | Acrylic + Aluminum |
| Product Dimensions | 6"L x 6"W x 0.5"H (150mm x 150mm x 12.5mm) |
| Cutout Diameter | 205mm (for 18W) |
| Working Temperature | -10°C to +50°C |
| Installation Type | Recessed |
Image: Technical dimensions for 18W and 24W LED panel lights, indicating the required cutout diameter for installation.
4. Setup & Installation
Follow these steps for proper installation. If you are unsure, consult a qualified electrician.
Pre-Installation Checklist:
- Ensure power is OFF at the main circuit breaker.
- Verify that the installation location is suitable for a recessed light fixture.
- Confirm the ceiling material can support the fixture.
Installation Steps:
- Prepare the Ceiling Opening: Using a suitable tool, cut a round hole in the ceiling with a diameter of 205mm for the 18W model. Refer to the dimensions image in Section 3 for precise measurements.
- Attach Mounting Springs: Secure the two provided mounting springs to the designated slots on the back of the LED panel light.
- Connect Wiring: Connect the LED driver to the household electrical wiring (AC 85-265V). Ensure proper polarity and secure connections. The light fixture does not include a ground wire; adhere to local electrical codes for safe installation.
- Connect Light to Driver: Plug the connector from the LED panel light into the output connector of the LED driver.
- Insert Light Fixture: Fold the mounting springs upwards and carefully push the LED panel light into the prepared ceiling opening. The springs will hold the fixture securely in place.
- Final Check: Ensure the light is flush with the ceiling and securely installed.
Image: Visual guide for installing the recessed LED panel light, detailing the process from preparing the opening to securing the fixture.
Video: A short clip illustrating the opening dimensions required for the panel light installation.
5. Operating Instructions
The BSOD LED Panel Light 18W operates as a standard on/off light fixture. It is not dimmable.
Turning On/Off:
Once installed and connected to a power source, the light can be controlled using a standard wall switch connected to the circuit.
Color Temperature:
This specific model provides Warm White light (2800-3200K). Warm white is suitable for environments requiring a cozy and inviting atmosphere, such as living rooms, bedrooms, hotels, and coffee shops.
Image: An illuminated BSOD LED panel light emitting a warm white glow (2800-3300K).
Lighting Area Recommendations:
To determine the number of lights needed for a specific area, consider the following examples for a 107 sq.ft area with an 8ft installation height:
- Home (90-150 lux required): For 18W lights, 1-2 units are typically sufficient.
- Office or Commercial (180-240 lux required): For 18W lights, approximately 3 units are recommended.
6. Maintenance
The BSOD LED Panel Light is designed for long-term, low-maintenance operation.
Cleaning:
- Ensure the power is off before cleaning.
- Wipe the surface of the light with a soft, dry, or slightly damp cloth.
- Do not use harsh chemicals, abrasive cleaners, or solvents, as these can damage the finish or acrylic shade.
Lifespan:
With an average lifespan of over 20,000 hours, this LED panel light significantly reduces the frequency of replacement and associated maintenance efforts.
7. Troubleshooting
If you encounter issues with your LED panel light, refer to the following common problems and solutions:
- Light does not turn on:
- Check the power supply at the circuit breaker.
- Ensure all electrical connections are secure and correctly wired.
- Verify the LED driver is properly connected to both the power supply and the light fixture.
- Light flickers or is dim:
- Confirm the voltage supply is within the specified range (AC 85-265V).
- Ensure there are no loose connections.
- As this light is non-dimmable, ensure it is not connected to a dimmer switch.
If these steps do not resolve the issue, please contact customer support.
8. Warranty Information
The BSOD LED Panel Light 18W comes with a Limited Warranty. Please refer to the product packaging or contact the seller for specific terms and conditions of the warranty.
9. Support
For technical assistance, troubleshooting beyond this manual, or warranty claims, please contact BSOD customer support or the retailer from whom you purchased the product. Have your model number (BSOD-18W) and purchase information ready when contacting support.