Jada Hyperchargers 1:16 2017 Ford GT Remote Control Car

Introduction

This instruction manual provides essential information for the safe and proper operation, maintenance, and troubleshooting of your Jada Hyperchargers 1:16 2017 Ford GT Remote Control Car. Please read this manual thoroughly before use and retain it for future reference.

The Jada Hyperchargers 1:16 2017 Ford GT is a full-function radio control car designed for enthusiasts aged 8 and up, featuring custom styling and a 2.4 GHz frequency for multi-player racing.

What's in the Box

• 1x Jada Hyperchargers 1:16 2017 Ford GT Remote Control Car
• 1x Remote Controller
• 2x AA Batteries (for remote controller)
• Built-in Lithium-Ion rechargeable battery (for car)
• Attached USB plug (for car charging)

Safety Information

WARNING: This product contains small parts and is not suitable for children under 3 years of age due to choking hazards. Recommended for ages 8 years and up.

• Always operate the vehicle in a safe, open area away from people, pets, and obstacles.
• Do not operate near streets, busy roads, or water.
• Keep fingers, hair, and loose clothing away from the wheels and moving parts.
• Do not expose the vehicle or controller to moisture or extreme temperatures.
• Adult supervision is recommended during operation, especially for younger users.
• Do not attempt to modify or disassemble the product.

Product Overview

Figure 1: The 1:16 scale 2017 Ford GT remote control car alongside its 2.4 GHz controller. The car features a sleek black finish with white racing stripes and the number '2' on the side.

Figure 2: Rear view of the Ford GT RC car, highlighting the detailed taillights, exhaust, and rear spoiler. The racing stripes continue from the roof to the rear.

Figure 3: Top-down view of the Ford GT RC car, showcasing the prominent white racing stripes running along the hood and roof, and the number '2' on the front hood.

Figure 4: Underside of the Ford GT RC car, showing the battery compartment, ON/OFF/CHARGE switch, and the steering trim adjustment. The USB charging cable is integrated into this section.

Setup

1. Remote Controller Battery Installation

The remote controller requires 2 AA batteries (included).

1. Locate the battery compartment on the back of the remote controller.
2. Open the battery compartment cover.
3. Insert 2 AA batteries, ensuring correct polarity (+/-) as indicated inside the compartment.
4. Close the battery compartment cover securely.

2. Vehicle Charging

The vehicle is powered by a built-in Lithium-Ion rechargeable battery and features an attached USB plug for convenient charging.

1. Locate the USB charging plug on the underside of the vehicle (refer to Figure 4).
2. Ensure the vehicle's power switch is in the "OFF/CHARGE" position.
3. Plug the USB connector into any standard USB power source (e.g., computer USB port, USB wall adapter).
4. The charging indicator light on the vehicle will illuminate during charging.
5. Charging time may vary. Refer to the packaging for estimated charging duration.
6. Once fully charged, disconnect the USB plug and store it securely in its compartment.

Operating Instructions

1. Pairing the Controller and Vehicle

Your Jada Hyperchargers RC car operates on a 2.4 GHz frequency, allowing multiple players to race simultaneously without interference.

1. Ensure the remote controller has fresh batteries installed.
2. Turn on the vehicle by sliding the power switch to the "ON" position (refer to Figure 4).
3. Turn on the remote controller.
4. The controller and vehicle should automatically pair. If not, turn both off and then on again.
5. A successful connection is indicated by the vehicle's lights or a specific sound (refer to product packaging for details).

2. Driving the Vehicle

Familiarize yourself with the remote controller's functions:

• Forward/Reverse: Use the trigger on the controller to move the car forward or backward.
• Steering: Use the steering wheel on the controller to turn the car left or right.

The 2.4 GHz frequency enables a range of up to 100 feet. For optimal performance, operate the vehicle on smooth, flat surfaces.

3. Steering Trim Adjustment

If the vehicle does not drive straight, use the steering trim adjustment located on the underside of the car (refer to Figure 4) to fine-tune its alignment.

Maintenance

• Cleaning: Wipe the vehicle and controller with a soft, dry cloth. Do not use harsh chemicals or water, as this may damage electronic components.
• Battery Care:
  • Always remove AA batteries from the remote controller if it will not be used for an extended period.
  • Ensure the vehicle's built-in battery is fully charged before storage to prolong its lifespan.
  • Do not overcharge the vehicle's battery.
• Storage: Store the vehicle and controller in a cool, dry place away from direct sunlight and extreme temperatures.
• Inspection: Periodically inspect the vehicle for any loose parts, damaged wires, or excessive wear.

Troubleshooting

Specifications

• Product Dimensions: 12 x 4.5 x 3 inches
• Item Weight: 1.74 pounds
• Model Number: 30721
• Manufacturer: Jada Toys
• Recommended Age: 8 years and up
• Batteries: 2 AA batteries (included for controller), Built-in Lithium-Ion rechargeable battery (for vehicle)
• Frequency: 2.4 GHz
• Scale: 1:16

Warranty and Support

For information regarding product warranty, returns, or technical support, please refer to the original product packaging or contact Jada Toys customer service directly.

You can also visit the official Jada Toys store for more information and contact options: Jada Toys Store on Amazon.

Please have your model number (30721) and purchase details ready when contacting support.