ELLE Painless Hair Remover EL-027-WHT User Manual

1. Introduction

The ELLE Painless Hair Remover is designed for gentle and instant removal of unwanted facial hair. Its compact design and built-in LED light enhance precision and ease of use, making it suitable for various skin types.

Image 1.1: The ELLE Painless Hair Remover, displaying its main components.

Key Features:

• Painless hair removal for lips, chin, and cheeks.
• Integrated LED light for enhanced visibility.
• Compact and portable design for convenience.
• Suitable for all skin types.

2. Safety Information

Please read all safety instructions before using the device to ensure safe operation and prevent injury.

• Avoid use on infants.
• Keep the hair remover away from water sources to prevent electrical hazards.
• Follow recommended cleaning and maintenance procedures to prevent skin irritation or injury.
• Do not attempt to disassemble or modify the device.
• Store in a cool, dry place, out of reach of children.

3. Setup

Battery Installation:

The ELLE Painless Hair Remover operates on one (1) AA battery (not included).

1. Gently twist the bottom section of the device counter-clockwise to open the battery compartment.
2. Insert one (1) AA battery, ensuring the positive (+) and negative (-) terminals align correctly with the indicators inside the compartment.
3. Twist the bottom section clockwise to securely close the battery compartment.

Image 3.1: Bottom section of the device, indicating the battery compartment.

4. Operating Instructions

Follow these steps for effective and painless hair removal:

1. Ensure the device has a fresh battery installed.
2. Remove the protective cap from the hair remover.
3. Locate the power switch on the side of the device and slide it upwards to turn the device ON. The built-in LED light will illuminate.
4. Gently press the hair remover head flat against your skin where unwanted hair is present (e.g., lips, chin, cheeks).
5. Move the device in small, circular motions to effectively remove hair. The LED light will help you see fine hairs.
6. After use, slide the power switch downwards to turn the device OFF.
7. Replace the protective cap.

Image 4.1: Proper technique for using the hair remover on facial areas.

5. Maintenance and Cleaning

Regular cleaning ensures optimal performance and hygiene of your hair remover.

1. Ensure the device is turned OFF before cleaning.
2. Twist the top section (the rose gold head) counter-clockwise to detach it from the main body.
3. Use the small cleaning brush (if included) to gently brush away any accumulated hair from the blade area and inside the head.
4. Do not rinse the device or its head under water. This device is not waterproof.
5. Wipe the exterior of the device with a dry, soft cloth.
6. Reattach the head by aligning it and twisting clockwise until secure.

Image 5.1: The hair remover with its cap, illustrating its compact form for storage.

6. Troubleshooting

If you encounter issues with your ELLE Painless Hair Remover, refer to the following common solutions:

• Device not turning on: Check if the battery is inserted correctly with the correct polarity. Replace with a new AA battery if necessary.
• Reduced performance: Clean the blade head thoroughly to remove any trapped hair. Ensure the head is securely attached.
• Skin irritation: Ensure your skin is clean and dry before use. Avoid pressing too hard. If irritation persists, discontinue use.

7. Specifications

8. Warranty and Support

For information regarding warranty coverage, product support, or replacement parts, please contact the manufacturer or retailer where the product was purchased.

You may also visit the official ELLE Store on Amazon for additional product information.