1. Introduction
Thank you for choosing the Solem WooBee 2-Station Battery-Powered Irrigation Programmer. This device allows for efficient and automated control of your irrigation system via Bluetooth, offering convenience and water conservation. Please read this manual carefully before installation and operation to ensure proper use and longevity of your device.
Figure 1: Front view of the Solem WooBee Irrigation Programmer, showing the digital display, control buttons, and battery compartment indicator. The display shows time, date, program status, and battery level.
2. Setup
2.1 Battery Installation
- Locate the battery compartment on the back of the programmer.
- Open the compartment cover.
- Insert the required batteries (typically 2 x AA, refer to product packaging for exact type) ensuring correct polarity (+/-).
- Close the battery compartment cover securely to maintain water resistance.
2.2 Mounting and Connection
- Attach the programmer to your outdoor faucet or main water supply line. Ensure a tight, leak-free connection.
- Connect your irrigation hoses or drip lines to the outlets of the programmer.
- Ensure the programmer is mounted vertically to prevent water ingress into the battery compartment.
2.3 Bluetooth Pairing
- Download the "Solem" app from your smartphone's app store (iOS or Android).
- Enable Bluetooth on your smartphone.
- Open the Solem app and follow the on-screen instructions to discover and pair with your WooBee programmer. The Bluetooth icon will appear on the programmer's display when connected.
3. Operating Instructions
The WooBee programmer features a clear LCD display and intuitive buttons for direct control, in addition to app control.
3.1 Display Overview (Refer to Figure 1)
- INFO: Displays general information about the device.
- MAN (Manual): Initiates or stops manual watering.
- PROG (Program): Allows access to programming irrigation schedules.
- ON/OFF: Toggles the programmer's active state.
- DATE: Used to set or view the current date.
- Battery Indicator: Shows remaining battery life.
- Bluetooth Icon: Indicates active Bluetooth connection.
- Time/Date Display: Shows current time and date (e.g., AM 08:00, 18/08/18).
- Day Selection: Highlights active days for programming (e.g., Mo, Tu, We, Th, Fr, Sa, Su).
3.2 Button Functions
- Up/Down Arrows: Navigate through menus or adjust values.
- Left/Right Arrows: Move between settings or options.
- Center Button (OK/Enter): Confirms selections.
- Home Button: Returns to the main screen.
3.3 Programming Irrigation Schedules
While detailed programming is best done via the Solem app, basic schedules can be set directly on the device:
- Press the PROG button to enter programming mode.
- Use the arrow buttons to set start times, duration, and frequency for each station.
- Select the days of the week for watering using the day selection area.
- Confirm settings with the center button.
3.4 Manual Operation
To manually water, press the MAN button. You can then set a manual watering duration. Press MAN again to stop manual watering.
3.5 Setting Date and Time
Press the DATE button to access date and time settings. Use the arrow buttons to adjust values and the center button to confirm.
4. Maintenance
4.1 Battery Replacement
When the battery indicator shows low power, replace the batteries promptly to avoid interruption of irrigation schedules. Follow the steps in Section 2.1.
4.2 Cleaning
Clean the exterior of the programmer with a soft, damp cloth. Do not use abrasive cleaners or solvents. Ensure no water enters the battery compartment or electronic components.
4.3 Winterization
Before the first frost, disconnect the programmer from the faucet and hoses. Remove the batteries. Store the unit indoors in a dry, frost-free location to prevent damage from freezing water.
5. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Programmer not turning on. | Dead or incorrectly installed batteries. | Replace batteries, ensuring correct polarity. |
| No water flow. | Water supply off; clogged filter; incorrect program. | Check water supply; clean inlet filter; verify program settings. |
| Bluetooth connection issues. | Programmer out of range; Bluetooth off on phone; app issue. | Move closer to programmer; enable Bluetooth; restart app/phone. |
| Leaking connections. | Loose connections; damaged washer. | Tighten connections; replace rubber washers. |
6. Specifications
- Model: Solem WooBee 2-Station
- Dimensions: 9 x 9 x 5.5 cm (3.54 x 3.54 x 2.17 inches)
- Weight: 480 g (1.06 lbs)
- Connectivity: Bluetooth
- Power Source: Battery-powered (specific type not provided, typically AA)
- Stations: 2
7. Warranty and Support
Solem products are designed for durability and performance. For information regarding warranty coverage, technical support, or service, please refer to the warranty card included with your product or visit the official Solem website. Keep your purchase receipt as proof of purchase.
For further assistance, please contact Solem customer service through the contact information provided on their official website or within the Solem app.