Riwbox WT-7S

Download PDFFree PDF. The Save button below keeps a bookmark and private notes in your account.

Riwbox WT-7S Bluetooth Headphones User Manual

Model: WT-7S

Introduction

The Riwbox WT-7S Bluetooth Headphones are designed for an engaging audio experience. Featuring LED lights that synchronize with music, these foldable headphones offer both wireless Bluetooth and wired connectivity options. This manual provides instructions for proper use and care.

Riwbox WT-7S Bluetooth Headphones in pink and green with LED lights on the earcups

Image: Riwbox WT-7S Bluetooth Headphones in pink and green, showcasing the LED lights on the earcups.

What's in the Box

Verify that all items are present in the package:

  • Built-in microphone Bluetooth headphones
  • AUX 3.5mm analog audio cable
  • Type-C Charging Cable
  • Quick Guide & User Manual (this document)

Product Overview

Familiarize yourself with the headphone's components and controls.

Diagram of Riwbox WT-7S headphone controls including power, volume, track skip, LED light control, microphone, LED indicator, USB charge port, and 3.5mm AUX port.

Image: Detailed diagram illustrating the location and function of all controls and ports on the Riwbox WT-7S headphones.

  • ON/OFF Switch: Located on the left earcup.
  • Microphone: Integrated for hands-free calls.
  • LED Indicator: Displays charging status and Bluetooth pairing status.
  • Type-C Charge Port: For charging the headphones.
  • 3.5mm Audio AUX Port: For wired connection.
  • Control Buttons:
    • Long press to open/close LED light.
    • Press to play/pause music; press to answer/hang up calls.
    • Short press for volume up (+).
    • Long press for next song.
    • Short press for volume down (-).
    • Long press for previous song.

Setup

1. Charging the Headphones

Before first use, fully charge the headphones. Connect the provided Type-C charging cable to the headphone's charge port and the other end to a USB power source. The LED indicator will show charging status and turn off when fully charged.

Note: A full charge takes approximately 1 hour.

2. Bluetooth Pairing

  1. Ensure the headphones are turned off.
  2. Press and hold the ON/OFF button until the LED indicator flashes blue and red, indicating pairing mode.
  3. On your device (smartphone, tablet, PC), enable Bluetooth and search for available devices.
  4. Select "Riwbox WT-7S" from the list of devices.
  5. Once connected, the LED indicator will show a steady blue light or flash slowly.

The headphones will automatically attempt to reconnect to the last paired device when powered on.

Operating Instructions

Bluetooth Mode

  • Power On/Off: Use the ON/OFF switch.
  • Play/Pause Music: Press the Play/Pause button.
  • Volume Control: Short press the Volume Up (+) or Volume Down (-) buttons.
  • Next/Previous Track: Long press the Volume Up (+) for next track, and Volume Down (-) for previous track.
  • Answering/Ending Calls: Press the Play/Pause button to answer or end a call.
  • LED Light Control: Long press the dedicated LED light button to turn the LED blinking effect on or off. Turning off the LEDs can conserve battery for longer music playback.

Wired Mode (AUX)

When the headphone battery is depleted or if a wired connection is preferred, use the provided 3.5mm audio cable.

  1. Plug one end of the 3.5mm audio cable into the AUX port on the headphones.
  2. Plug the other end into the 3.5mm audio jack of your device.
Riwbox WT-7S headphones connected via 3.5mm audio cable, illustrating wired usage when battery is low.

Image: The Riwbox WT-7S headphones demonstrating wired connectivity using the 3.5mm audio cable, useful when the battery is low.

Note: In wired mode, the headphone's built-in controls (volume, track skip, LED lights) may not function, and control will be managed by the connected device.

Maintenance

  • Cleaning: Use a soft, dry cloth to clean the headphones. Avoid using abrasive cleaners or solvents.
  • Storage: Store the headphones in a cool, dry place away from direct sunlight and extreme temperatures. The foldable design helps minimize storage space.
  • Battery Care: To prolong battery life, avoid fully discharging the headphones frequently. Charge them regularly, even if not in use for extended periods.
  • Cable Care: Handle cables gently. Avoid sharp bends or excessive pulling to prevent damage.

Troubleshooting

ProblemSolution
Headphones do not power on.Ensure the headphones are charged. Connect the charging cable and allow it to charge for at least 10 minutes before attempting to power on again.
Cannot pair via Bluetooth.
  • Ensure headphones are in pairing mode (LED flashing blue/red).
  • Make sure Bluetooth is enabled on your device.
  • Move the headphones closer to your device (within 10 meters).
  • Forget "Riwbox WT-7S" from your device's Bluetooth list and try pairing again.
  • Restart both the headphones and your device.
No sound in Bluetooth mode.
  • Check if the headphones are properly paired and connected to your device.
  • Adjust the volume on both the headphones and your device.
  • Ensure no other audio output device is selected on your device.
No sound in wired mode.
  • Ensure the 3.5mm audio cable is fully inserted into both the headphones and the audio source.
  • Test with a different 3.5mm audio cable if available.
  • Check the volume on your audio source device.
LED lights are not working.Long press the LED light button to ensure the feature is enabled. If the battery is very low, the LED function might be automatically disabled to conserve power.

Specifications

Model NumberWT-7S
BrandRiwbox
Connectivity TechnologyWireless (Bluetooth), Wired (3.5mm AUX)
Bluetooth Version5.4
Bluetooth Range10 meters
Audio Driver Size40 millimeters
Frequency Response20 Hz - 20 kHz
Impedance32 ohm
Sensitivity88 dB
Battery Charge Time1 hour
Battery Average Life10 hours
Weight210 g
MaterialEco-friendly plastic, high-protein sponge, breathable leather
Additional FeaturesFoldable design, Built-in microphone, LED lights

Warranty and Support

The Riwbox WT-7S headphones come with a 1 Year Manufacturer Warranty. For warranty claims or technical support, please contact the seller or manufacturer directly through their official channels.

For further assistance, refer to the manufacturer's website or contact their customer service.

Product Videos

Riwbox WT-7S Headphones Overview by Cotico

Video: An official overview of the Riwbox WT-7S headphones, highlighting features like LED lights and microphone. Provided by Cotico, the seller.

© 2026 Riwbox. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.