Fieldpiece SM480V SMAN Digital Manifold Wireless Data Logging Instruction Manual

1. Introduction

The Fieldpiece SM480V SMAN Digital Manifold is an advanced tool designed for HVAC and refrigeration professionals. It accurately measures low and high pressures, superheat, and subcooling, and includes a micron gauge for precise vacuum measurements. This manual provides essential information for the proper setup, operation, maintenance, and troubleshooting of your SM480V unit.

2. Key Features

Advanced Digital Manifold & Micron Gauge: For comprehensive HVAC & Refrigeration diagnostics and service.
Accurate Measurements: Precisely measures low and high pressure, superheat, and subcooling.
Protected Thermocouple Jacks: Dedicated jacks for pipe and outdoor temperature sensors.
Four-Valve Manifold: Includes an integrated vacuum gauge for efficient system evacuation.
Job Link Psychrometer Probe Connectivity: Allows connection of Job Link Psychrometer probes to the SMAN for enhanced diagnostics.
Data Logging: Equipped with internal data logging capabilities for up to 7 continuous days or 9 jobs.
Temperature Compensated System Tightness Test: Provides reliable leak detection.

Fieldpiece SM480V SMAN Digital Manifold showing features and benefits — Figure 2.1: Overview of Fieldpiece SM480V features and benefits.

3. What's in the Box

Your Fieldpiece SM480V package includes the following items:

SM480V SMAN 4-port Refrigerant Manifold
(2) TC24 Wired Type-K Pipe Clamp Thermocouples
(1) ATA1 Type-K Bead Thermocouple with Clip
(1) ANC11 Padded Drawstring Case
Batteries (6 AA batteries required, included)

Fieldpiece SM480V SMAN Digital Manifold and included accessories — Figure 3.1: Contents of the SM480V package, including the manifold, thermocouples, case, and batteries.

4. Setup

4.1. Battery Installation

Locate the battery compartment on the back of the manifold.
Open the compartment cover.
Insert 6 AA alkaline batteries, ensuring correct polarity.
Close the battery compartment cover securely.

4.2. Connecting Thermocouples

Connect the TC24 Wired Type-K Pipe Clamp Thermocouples to the protected thermocouple jacks on the manifold.
Connect the ATA1 Type-K Bead Thermocouple to its designated jack if needed for ambient or specific component temperature readings.

4.3. Hose Connections

The SM480V features a four-valve manifold. Connect your refrigerant hoses to the appropriate ports:

Low Side: Typically blue hose.
High Side: Typically red hose.
Vacuum Port (VAC): For connecting to a vacuum pump.
Refrigerant Port (REF): For connecting to a refrigerant tank.

Fieldpiece SM480V SMAN Digital Manifold with hoses connected — Figure 4.1: Fieldpiece SM480V with refrigerant hoses and thermocouple clamps attached.

5. Operating Instructions

5.1. Power On/Off

Press and hold the power button to turn the unit on or off. A short press will toggle the backlight.

5.2. Selecting Refrigerant

Use the 'MENU' button to navigate to the refrigerant selection. Use the arrow buttons to scroll through the available refrigerants (e.g., R22, R410A, R134a, R404A, R407C, R448A, R449A, R452A, R32, R454B, R454C, R407A, R407F, R422B, R422C, R422D, R507A, R513A, R1234yf, R1234ze, R600a, R290, R744). Press 'ENTER' to confirm your selection. The SM480V supports downloading new refrigerants via the Job Link app.

5.3. Taking Measurements

Once connected to the system and refrigerant is selected, the manifold will display real-time pressure and temperature readings. Superheat and subcooling values will be calculated automatically based on the connected thermocouples.

Fieldpiece SM480V SMAN Digital Manifold in use on an HVAC unit — Figure 5.1: Fieldpiece SM480V in operation, displaying real-time system data.

5.4. Data Logging

The SM480V can log data internally. To initiate data logging:

Navigate to the data logging menu.
Set the desired logging duration and interval.
Start the logging process. The manifold will store measurements, which can be downloaded later via the Micro USB port.

Video 5.1: Fieldpiece Digital Manifold Product Overview. This video provides a general overview of the manifold's features and functions, including data logging capabilities.

5.5. System Tightness Test

Utilize the temperature compensated system tightness test feature to accurately detect leaks in the system. Follow the on-screen prompts to perform the test.

5.6. Wireless Connectivity (Job Link App)

Connect your SM480V to the Fieldpiece Job Link app on your smartphone or tablet for remote monitoring, advanced diagnostics, and report generation. This allows you to view readings from a distance and manage job data efficiently.

Video 5.2: Easy way to find Subcooling. This video demonstrates how to use the manifold to easily determine subcooling values, a critical HVAC diagnostic.

6. Maintenance

6.1. Cleaning

Wipe the manifold with a damp cloth. Do not use abrasive cleaners or solvents. Ensure the unit is dry before storage.

6.2. Battery Replacement

Replace batteries when the low battery indicator appears on the display to ensure continuous operation and accurate readings.

6.3. Sensor Calibration

Regularly check and calibrate sensors as per manufacturer recommendations to maintain accuracy. Refer to the Job Link app or Fieldpiece website for detailed calibration procedures.

6.4. Firmware Updates

Periodically check for firmware updates via the Fieldpiece website or Job Link app. Updates can provide new features, refrigerant profiles, and performance improvements. Use the Micro USB port to update firmware.

7. Troubleshooting

Problem	Possible Cause	Solution
No display/Unit won't turn on	Dead batteries; Incorrect battery installation	Replace batteries; Check battery polarity
Inaccurate pressure/temperature readings	Sensors not properly connected; Sensors need calibration; Incorrect refrigerant selected	Ensure secure connections; Calibrate sensors; Verify correct refrigerant selection
Wireless connectivity issues	Out of range; Bluetooth interference; App not updated	Move closer to the manifold; Minimize interference; Update Job Link app
Vacuum readings unstable	System leak; Moisture in system; Contaminated manifold/hoses	Perform tightness test; Ensure thorough evacuation; Clean manifold and hoses

8. Specifications

Display: LCD (5 inches diagonal)
Maximum Manifold Pressure: 800 Psig (5500 kPa)
Battery Type: 6 x AA alkaline
Battery Life: 350 hours typical (without vacuum, backlight, and wireless)
Radio Frequency: 2.4 GHz
Wireless Range: 1000 feet (305 meters) line of sight (distance decreases through obstructions)
Data Port: Micro USB (for extracting data logs or updating firmware)
Operating Environment: 32°F to 122°F (0°C to 50°C) at <75% RH
Water Resistant: Designed to IP54
Material: ABS Plastic
Item Weight: 6.2 Pounds
Product Dimensions: 63 x 10.5 x 12.5 inches

Fieldpiece SM480V SMAN Digital Manifold specifications — Figure 8.1: Detailed specifications for the Fieldpiece SM480V SMAN Digital Manifold.

Comparison table of Fieldpiece SM480V and SM482V models — Figure 8.2: Comparison of SM480V and SM482V models, highlighting key differences in specifications.

9. Warranty and Support

For warranty information, product registration, and technical support, please visit the official Fieldpiece website or contact their customer service. Keep your purchase receipt as proof of purchase for warranty claims.

Note: Warranty terms may vary based on region and retailer. It is recommended to purchase from authorized dealers to ensure full warranty coverage.

	Fieldpiece SM480V SMAN Refrigerant Manifold + Micron Gauge Operator's Manual Comprehensive operator's manual for the Fieldpiece SM480V SMAN Refrigerant Manifold and Micron Gauge, detailing features, operation, maintenance, specifications, and compliance for HVACR professionals. Covers setup, measurements, calculations, menu functions, and troubleshooting.
	Fieldpiece SM380V SMAN Refrigerant Manifold + Micron Gauge Operator's Manual Operator's manual for the Fieldpiece SM380V SMAN Refrigerant Manifold + Micron Gauge (3 Port). This guide provides detailed information on features, operation, specifications, maintenance, and troubleshooting for HVACR professionals.
	Fieldpiece SM480V SMAN Refrigerant Manifold + Micron Gauge Operator's Manual Operator's manual for the Fieldpiece SM480V SMAN Refrigerant Manifold + Micron Gauge (4 Port). This guide covers features, operation, maintenance, and specifications for this professional HVAC tool.
	Fieldpiece SMAN® Coletor de Refrigerante com Vacuómetro Incorporado - Manual do Operador Manual do operador detalhado para os coletores de refrigerante Fieldpiece SMAN® com vacuómetro incorporado (modelos SM382VINT e SM482VINT). Abrange operação, segurança, manutenção e especificações para profissionais de HVACR.
	Fieldpiece MG44 Wireless Vacuum Gauge Operator's Manual Operator's manual for the Fieldpiece MG44 Wireless Vacuum Gauge, detailing its features, operation, maintenance, specifications, and safety guidelines for HVAC/R professionals. Includes quick start, alarm modes, settings, and evacuation tips.
	Fieldpiece SMAN® Refrigerant Manifold Operator's Manual Operator's manual for the Fieldpiece SMAN® Refrigerant Manifold with Built-in Vacuum Gauge (Models SM382V and SM482V), detailing features, operation, specifications, and maintenance for HVACR professionals.