1. Introduction
This manual provides detailed instructions for the assembly, operation, and maintenance of your Hemudu HT2001BP Universal Swivel TV Stand. Please read this manual thoroughly before installation and retain it for future reference. Proper installation and use are essential for optimal performance and safety.
2. Safety Information
- Weight Capacity: Do not exceed the maximum load capacity of 45 kg (99 lbs) for the TV. Each shelf supports up to 10 kg (22 lbs).
- TV Size: This stand is designed for TVs ranging from 19 to 42 inches.
- VESA Compatibility: Ensure your TV's VESA mounting pattern is compatible: 75x75mm, 100x100mm, 200x100mm, or 200x200mm.
- Stable Surface: Always place the TV stand on a flat, stable, and level surface to prevent tipping.
- Children and Pets: Keep children and pets away from the stand during assembly. Do not allow them to climb on or play with the stand.
- Secure Installation: Ensure all screws are tightened securely before use. Do not overtighten.
- Cable Management: Use the provided cable management clips to organize cables and prevent tripping hazards.
3. Package Contents
Please verify that all components are present and undamaged before beginning assembly. If any parts are missing or damaged, contact customer support.
- Tempered Glass Base
- Main Support Pillar
- TV Mounting Bracket
- Upper Shelf
- Lower Shelf
- Hardware Kit (various screws, washers, spacers, and tools)
- Cable Management Clips
- Instruction Manual
Included TV Mounting Screws: M4x30mm, M6x30mm, M8x45mm, along with various spacers and washers to ensure compatibility with different TV models.
Image: VESA compatibility and included mounting hardware. This diagram illustrates how to measure your TV's VESA pattern and shows the different screw types and spacers provided for secure TV attachment.
4. Setup and Assembly Instructions
Follow these steps carefully for proper assembly. It is recommended to have two people for certain steps, especially when mounting the TV.
- Attach Main Pillar to Base: Secure the main support pillar to the tempered glass base using the designated screws and tools from the hardware kit. Ensure it is firmly attached and stable.
- Install TV Mounting Bracket: Attach the TV mounting bracket to the main support pillar at your desired initial height. The bracket allows for 16 levels of height adjustment.
- Attach Shelves: Install the upper and lower shelves to the main support pillar. The shelves can be adjusted vertically to accommodate your media devices. The upper shelf features a heat dissipation design.
- Prepare TV for Mounting: Identify your TV's VESA mounting pattern. Select the appropriate screws, washers, and spacers from the hardware kit that fit your TV's mounting holes. Attach the TV bracket adapters to the back of your TV.
- Mount TV to Stand: Carefully lift your TV and hook it onto the TV mounting bracket on the stand. Secure the TV in place using the safety lock screws.
- Cable Management: Use the provided cable clips to route and organize all TV and device cables along the main pillar, ensuring a tidy and safe setup.
Image: Component details including 10mm tempered glass, cable management, rubber gaskets, and screw storage. This image highlights key features that aid in assembly and long-term use.
5. Operating Instructions
Your Hemudu HT2001BP TV stand offers several adjustment options for an optimal viewing experience.
- Swivel Adjustment: The TV mount can swivel ±50 degrees (100 degrees total) left or right. Gently push the TV screen to adjust the viewing angle.
- Tilt Adjustment: The TV mount allows for a tilt range of -15 degrees (downward) to +10 degrees (upward). Loosen the tilt knobs on the bracket, adjust to the desired angle, and re-tighten securely.
- Height Adjustment: The TV mounting bracket can be adjusted to 16 different height levels, offering an adjustment range of approximately 7.9 inches. To adjust, loosen the securing bolts on the pillar, slide the bracket to the new height, and re-tighten the bolts firmly.
- Shelf Adjustment: The upper and lower shelves can be repositioned along the main pillar to suit your equipment. Loosen the shelf clamps, move the shelf to the desired height, and re-tighten the clamps.
Image: Swivel functionality. The TV stand allows for a 100-degree swivel, providing flexible viewing angles in a room.
Image: Tilt functionality. The TV can be tilted up or down to reduce glare and optimize viewing from different positions.
Image: 16-level height adjustment. This feature allows users to set the TV at an ergonomic viewing height.
Image: Shelf adjustment. The shelves can be adjusted to accommodate various media devices, with the top shelf designed for heat dissipation.
6. Maintenance
Regular maintenance ensures the longevity and safe operation of your TV stand.
- Cleaning: Wipe the stand with a soft, dry cloth. For stubborn marks, use a slightly damp cloth and mild detergent, then dry thoroughly. Avoid abrasive cleaners or solvents.
- Check Connections: Periodically check all screws and bolts to ensure they remain tight. Re-tighten if necessary, but do not overtighten.
- Inspect for Damage: Regularly inspect the tempered glass base and steel pillar for any signs of damage, cracks, or bending. Discontinue use if damage is found and contact customer support.
7. Troubleshooting
If you encounter any issues with your TV stand, refer to the following common problems and solutions:
- Stand is Unstable:
- Ensure all assembly screws are fully tightened.
- Verify the stand is placed on a flat, level surface.
- Check that the TV weight and size are within the specified limits.
- Difficulty Adjusting Swivel/Tilt:
- For tilt, ensure the tilt knobs are sufficiently loosened before attempting to adjust. Re-tighten after adjustment.
- Ensure no cables are obstructing movement.
- TV Not Level:
- Check that the TV mounting bracket is installed evenly on the main pillar.
- Ensure the TV is properly seated on the bracket and secured with the safety lock.
If the problem persists, please contact customer support for assistance.
8. Specifications
| Feature | Specification |
|---|---|
| Model Number | HT2001BP |
| Brand | Hemudu |
| Compatible TV Sizes | 19 - 42 inches |
| Maximum TV Load Capacity | 45 kg (99 lbs) |
| Maximum Shelf Load Capacity | 10 kg (22 lbs) per shelf |
| VESA Compatibility | 75x75mm, 100x100mm, 200x100mm, 200x200mm |
| Swivel Angle | ±50 degrees (100 degrees total) |
| Tilt Angle | -15 degrees to +10 degrees |
| Height Adjustment | 16 levels, approx. 7.9-inch range |
| Base Dimensions | 55 x 38 cm (21.7 x 15 inches) |
| Material | Tempered Glass, Steel |
| Color | Black |
9. Warranty and Support
For warranty information, product support, or to inquire about replacement parts, please contact the manufacturer or seller directly. Keep your purchase receipt as proof of purchase.
